Kogan Ovela NALA OVNALADTBWA User manual

NALA DINING TABLE
OVNALADTBWA, OVNALADTBNA

Hardware
A(x18) B(x18) C(x20) D(x16)
E(x1) F(x20)
COMPONENTS

Step 1: Attach A onto part 1 and the two parts labelled 2.
A(x18)
Step 2: Using a Phillips screwdriver (not supplied), secure B to A with parts labelled 2 and 3.
This creates the frame assembly.
ASSEMBLY

Step 3: Align the holes on x1 part 6 and 4 as shown below. Using the E Allen key, secure C
screws through the holes. Place F on top of each C screw once secure. Repeat this process
with x1 part 7and 5.
Repeat the whole process with the remaining parts labelled 6,4,7 and 5. This will create
four leg assemblies.
Step 4: Using the EAllen key, attach the four leg assemblies to the frame assembly using C
screws. Place F on top of each C screw once secured.
Using a Phillips screwdriver (not supplied), secure D screws as shown below.

Step 5: Ensuring the arrows on Bpoint towards the holes Awill be placed into, use a
Phillips screwdriver (not supplied) and secure Binto parts 2 and 3.
Place part 1onto the frame assembly and secure B to A.

Assembly complete.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com