Kogan KAAUTPSTMKR User manual

AUTOMATIC PASTA MAKER
KAAUTPSTMKR
Quick Start Guide
Important Safeguards
When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to
persons, basic safety precautions should always be followed.
•Read all instructions carefully, even if you feel you are quite familiar with the appliance.
•Don t touch the moving parts of the appliance.
•This appliance is intended to be plugged in a standard domestic power outlet.
•Always unplug after use, during assembly or for cleaning.
•To protect against risk of electric shock, do not immerse cord, plug or any other parts of
the appliance in water or other liquids.
•Never leave the appliance unattended while in use.
•Do not let the power cord hang over the edge of table or worktop or touch hot surfaces,
including the stove.
•Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or is dropped, or damaged in any matter. Contact the Kogan customer
service team for more information, and if necessary for examination, repair or electrical or
mechanical adjustment.
•The use of attachment not recommend by Kogan.com may cause a risk of injury to
persons.
•Don t use outdoors.
•This appliance is for home use only.
•Store the unit indoors in a dry location.
•If the supply cord is damaged, the cord must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
•This product has not been designed for any uses other than those specified in this
booklet.
efore first use
•Thoroughly clean all parts which make contact with food with hot soapy water (with the
exception of the base unit). For more details, please refer to paragraphs about cleaning
and maintenance.
•Place the appliance on an appropriate surface
•Please be familiar with the appliance before connecting it to the power outlet.
Product & Usage
1 – Power switch
2 – Unit base
3 – Mixing container
4 – Lid
5 – Storage compartment
6 – Turbine
7 – Evacuation tube
8 – Screw
9 – Pasta grid
10 – Nut
11 – Watering portal

Assembling your product
Place the unit on a horizontal and stable working surface. Insert the container
(3) horizontally onto the unit base (2) by thoroughly pushing it through to
the back of the base.
Insert the screw (8) into the evacuation tube (7)
Insert the turbine (6) onto the driving rod of the screw. Insert all parts into
the container (3), ensuring that the end of the screw's rod penetrates the
groove of the driver.
Attach the evacuation tube (7) according to the position as shown in section
“1” of the image. Then lock the evacuation tube (7) into the container (3) by
rotating the tube as shown in section “2”.
Embed one of the pasta grids (9) onto the end of the evacuation tube. (7)
Lock the pasta grid (9) onto the evacuation tube (7) using the nut (10).
To use the sausage tube, place the tube in the nut and screw the ensemble on
to the evacuation tube (7).
Place the lid (4) on top of the container into which all of the parts have been
installed, then lock the lid on the container.
NOTE: The pasta maker will not work without the lid correctly in place.
To disassemble the appliance, please remove the lid first.

Switch functions
The position “MIX” allows you to mix and prepare the dough.
The position “EXT” allows you to extract the mixture to form the pasta you want.
The position “OFF” will shut the appliance down.
NOTE: The appliance will only operate when the 2 switches are BOTH in the same position (EXT
or MIX).
Storage space
The water measuring cups have one wide end and one narrow end. The
wider end has the markings “This side is up”. Please place cups with the
wide end up when placing into the storage compartment.
Opening the lid
When opening the lid, please press the lid tab with your thumb as
shown, while lifting the rim with your index finger.
Usage notes
•Mix dough for at least 4 minutes in order to make the dough of uniform consistency, and
to remove the lumps.
•If the dough is still powdery after mixing, add one teaspoon of water and mix.
•If the dough is too fluid and/or is sticking to the turbine, add a tablespoon of flour and
mix.
HOW TO USE PASTA MAKER
1. Select the pasta grid with the desired noodle shape and immerse it in warm water for
several minutes before use.
2. Put the pasta grid onto the evacuation tube and fix it into place with the nut.
3. Open the lid and put the flour into the mixing container. Close the lid, locking the mixing
container and the main unit body together firmly.
4. Press the two switches named “MIX”, and the machine will start working.
5. Slowly pour water (or other liquid as applicable) into the container through the watering
portal. The mixing process should take about 3~8 minutes.
6. Press the two switches to “OFF”, then to “EXT”, at which point the unit will start extruding
the noodles through the grid. This will take 10~15 minutes, depending on the the quantity
of noodles being prepared.
7. Press the two switches back to “OFF” once there are no more noodles coming out
through the pasta grid.

RECIPES
Regular Noodles
Ingredients: Plain flour 250g
5 cold water℃90ml
Salt 2g (Put salt into water and let dissolve)
Mixing Time: 8 minutes
Note: the max capacity of the flour can be 500g. Adjust other ingredients accordingly.
Egg Noodle
Ingredients: Plain flour 340g
Beat egg 100g
Water 30ml
Salt 2g (Put salt into water and let dissolve)
Mixing Time: 5 minutes
Note: the max capacity of the flour can be 500g. Adjust other ingredients accordingly.
Carrot Noodle
Ingredients Plain flour 340g
Carrot juice 140ml
Salt 2g (Put salt into juice and let dissolve)
Mixing Time: 5 minutes
Note: Carrot juice can be substituted by another vegetable juice. Juice should not contain pulp.
Note 2: the max capacity of the flour can be 500g. Adjust other ingredients accordingly.
CLEANING
After use, unplug appliance, wait for unit to shut down completely then remove all accessories.
Clean all of the accessories thoroughly with hot soapy water.
Thoroughly rinse all flour, pasta and soap from all of the parts and allow to dry completely before
storing.
If necessary, the unit base can be cleaned with a slightly moist cloth.
Never allow water to penetrate into the interior of the unit base.
Storage
Store unit in a dry place, away from direct sunlight and out of reach of children.