
Instruction Manual
3
14. Maintain a sufficient distance from heat sources
such as hobs or ovens in order not to damage the
device.
15. The device should only be connected to a
properly installed socket with earthing contacts.
The socket must also be readily accessible after
connection. The mains voltage must match the
technical data for the device (see the
"Specifications" chapter). Only use suitable
extension cables whose technical data is the
same as that of the device.
16. Ensure that it is not possible to trip over the
connected mains cable. Do not allow the cable to
hang over the edge of tables or kitchen counters.
17. Position the cable in such a way that it does not
become squashed or bent and does not come
into contact with hot surfaces.
18. Do not expose the device to extreme
temperatures, strong temperature fluctuations,
direct sunlight or moisture.
19. Always check the device for damage before
putting it into operation. If the device, cable or