Kogan KASPKXXBLTA User manual

KASPKXXBLTA
USER MANUAL

Safety Information
8.Do not install near any heat source such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding - type plug. a polarized plug has two
blades with one wider than the other. grounding
type plug has two blades and a third grounding
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus. If the power cord is damaged, it
must be repaired by a qualified repairer.
11. Only use attachments/accessories specified
by the manufacturer.
12. Unplug this apparatus during lightning storms
or when unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. The apparatus shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
15.
The mains plug or an appliance coupler is
used as the disconnect device, the disconnect
device shall remain readily operable.
16. Please read Rating Labels at the back of the
unit for power input and other safety
information.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EX OSE THIS
A LIANCE TO RAIN OR MOISTURE.
IM ORTANT SAFETY INSTRUCTIONS
To reduce the risk of electrical shock, fire, etc.:
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth. For stubborn stains,
use a soft cloth dampened with a weak solution of
mild detergent and water. Dry the apparatus
immediately afterwards with a clean cloth. Do not
use abrasive clothes, thinners, alcohol, or other
chemical solvents, because they may damage the
finish or remove the panel lettering.
7.Do not block any ventilation openings. The
ventilation shall not be impeded by covering the
ventilation openings with items, such as
newspapers, table clothes, curtains, etc..

Contents
Safety Information ............................................................................................................................... 2
Contents ............................................................................................................................................... 3
Introduction ......................................................................................................................................... 4
Package content ........................................................................................................................... 4
Front Overview ........................................................................................................................... 5
Back Overview ............................................................................................................................
Bluetooth Mode ................................................................................................................................... 7
Turning on ................................................................................................................................... 7
Pairing with Bluetooth devices ................................................................................................... 7
Aux in Mode ........................................................................................................................................ 9
Troubleshooting ................................................................................................................................. 10
Technical information ........................................................................................................................ 11

Introduction
Thank you for purchasing the K SPKXXBLT Wireless Mobile speaker. Enjoy music
wirelessly from your smart phone, tablet, laptop, or other Bluetooth enabled device anywhere
you choose.
ackage content
What you can find inside of your package:
Main unit
C/DC
dapter

Front Overview
Control All mode
/ MODE a. Press to turn on speaker.
b. While speaker is turned on, press to convert between
Bluetooth and ux in mode.
c. Long press to turn off speaker.
When a call comes, press to answer the call, press again to hang
up the phone.
Press to adjust volume level.
Red indicator Illuminates while speaker is turned on.
Blue indicator a. Blink slowly means speaker is attempting to pair with a
new Bluetooth device or connect to a paired Bluetooth device.
b. Remain steadily on means speaker is connected to a
paired Bluetooth device.
c. Blink quickly means a call is coming.
d. Indicator off means speaker is in ux in mode.

Back Overview
Items Remark:
Power cord socket: Connect to DC adaptor.
UX IN socket: It is for connecting the audio cable.
USB charging port Output a 5V voltage for charging your smart phone.

Bluetooth Mode
Turning on
1. Before using your new K SPKXXBLT speaker, firstly, you should connect it to
power adapter.
2. Press / MODE to switch on. The Blue indicator blinks slowly and waits for pairing with
a new Bluetooth device or connects to an already paired Bluetooth device.
airing with Bluetooth devices
Pairing occurs when two Bluetooth devices communicate with each other and establish a
connection. record of information about this connection is then stored in the memory of
each device. Once you pair a device with the K SPKXXBLT speaker, you should not have to
pair it again.
To begin pairing with a Bluetooth device
1. Turn on your Bluetooth device.
2. Set your Bluetooth device to “discover” the K SPKXXBLT speaker, then locate the
Bluetooth device list.
3. From the Bluetooth device list, select the device named “K SPKXXBLT ”.
4. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some
devices also ask you to accept the connection.
Your Bluetooth device indicates when pairing is complete. The K SPKXXBLT speaker
indicates pairing is complete when the Blue indicator remains steadily on.
To pair additional devices
Follow “To begin pairing with a Bluetooth device” steps 1-4.
Clearing memory
The K SPKXXBLT speaker memory can hold up to eight paired devices. When the memory
is full with eight devices and an additional device is paired, the earliest paired device is
deleted from memory
To clear the K SPKXXBLT speaker memory of all devices, press and hold the button
about 10 seconds.

Aux in Mode
You can use another audio device with your K SPKXXBLT speaker. This requires using an
audio cable with a 3.5mm plug on one end to connect with the ux input on the
K SPKXXBLT system.
1. Press / MODE to shift from BT. mode to ux in mode.
2. Plug the cable from the audio device into the ux connector on the back of the
K SPKXXBLT speaker.
3. To gain optimal volume levels, adjusting the output volume level on both the source
device and the K SPKXXBLT speaker itself is recommended.

Troubleshooting
roblem What to do
Speaker will not turn
on
Make sure your system is connected to a working mains outlet.
Paired Bluetooth
device will not
connect
If your device requires a passkey, make sure the one you
entered was correct.
Turn the K SPKXXBLT speaker off and back on.
Remove the K SPKXXBLT speaker from the pairing list
on your Bluetooth device pairing list. Then pair the device and
the K SPKXXBLT speaker again.
K SPKXXBLT
speaker indicates a
connection, but is not
playing music
Turn off or disable Bluetooth on all other paired devices nearby
and reconnect the device you want to hear.
Turn the K SPKXXBLT speaker off and back on.
Cannot pair the
K SPKXXBLT
speaker with my
Bluetooth device
Make sure your Bluetooth device is discoverable.
Your Bluetooth device may be out of range – try moving it
closer to the K SPKXXBLT speaker.
Make sure your Bluetooth device supports the transfer of
audio.
Move your Bluetooth device and/or K SPKXXBLT speaker
away from other devices that generate electromagnetic
interference.
If possible, turn off all other nearby Bluetooth devices or
disable their Bluetooth functionality.
Turn the K SPKXXBLT speaker off and back on.
No audio from a
Bluetooth device
Make sure your K SPKXXBLT speaker is not muted, and the
volume is up.
Make sure your Bluetooth device is playing audio, and the
volume is up.
Your Bluetooth device may be out of range – try moving it
closer to the K SPKXXBLT speaker.
Turn the K SPKXXBLT speaker off and back on.
No audio from the
UX source
Make sure your connected device is on and playing.
Make sure your K SPKXXBLT speaker is in ux in mode.
Make sure the 3.5mm plug is fully inserted into the
K SPKXXBLT speaker.

Technical information
ower supply rating
Input: 100-240V C, 50/60Hz
Output: 18VDC, 2 Max
Dimensions
H x W x D: 330mm x 135mm x115mm