Kogan KAPRSTVC22A User manual

22V Premium Long Life Stick Vacuum & Accessories Kit
KAPRSTVC22A
Table of Contents
Safety Warnings......................................................................................................................1
Parts..........................................................................................................................................2
Precautionary Measures.......................................................................................................3
Assembly.................................................................................................................................4
Cleaning the Dust Cup..........................................................................................................
Changing or Cleaning Sponge and HV Cotton Filter...............................................
Charging the Vacuum...........................................................................................................8
Troubleshooting.....................................................................................................................8
Safety Warnings
When using an electrical appliance, basic safety precautions must always be observed.
To reduce the risk of fire, electrical shock or injury:
•Do not use outdoors or on wet surfaces
•Do not allow to be used as a toy. Close attention is re uired when used by or near
children
•Use only as described in the manual. Do not use any attachments that have not been
supplied by Kogan.com
•Do not use the vacuum if it has been dropped, damaged, left outdoors or dropped in
water. Contact the Kogan.com customer support team
•Do not handle the plug or appliance with wet hands
•Do not put objects into any openings. Do not use with any of the openings blocked; keep
free of dust, lint, hair and anything else that may reduce air flow
•Keep hair, loose clothing, fingers and all body parts away from openings and moving
parts
•Do not pick up anything that is smoking or burning, such as cigarettes, matches or hot
ashes
•Use extra care when cleaning on stairs
•Do not use to pick up or clean flammable or combustible li uids such as fuel, or use in
areas where they may be present
•Look on the vacuum for warning labels and follow the instructions
•Keep the ends of the hose, wands and other attachments away from your face and body
•Do not use the vacuum cleaner without the dust cup filter in place
•Always unplug the vacuum before connecting or disconnecting the vacuum hose
•Store the vacuum indoors. After use pack the vacuum away to prevent tripping accidents
•Use of incorrect batteries can damage the motor. Please only use the supplied batteries
•Use only on dry, indoor surfaces
•Do not use for any purpose other than those described in this manual
•If the power cord is damaged, it must be replaced by a Kogan.com technician
1

Parts
1 – Electric Motorized Power Head Brush 2 – Aluminium tube
3 – Tube release button 4 – Body release button
5 – Indicator light 6 – Power switch
– Dust cup 8 – Upper dust tank release button
9 – Lower dust tank release button 10 – Multi-crevice nozzle
11 – Transformation joint 12 – Charging seat
13 – Charger 14 – Pet brush
15 – Universal multi brush 16 – Dust cup release button
1 – Dust cup cover 18 – Sponge, HV cotton
19 – Dust cup air exhaust cover 20 – Plastic centering filter system
21 – Dust cup 22 – Dust cup bottom
2

Precautionary Measures
If the opening that sucks in air, the brush or the extension tubes are blocked,
the vacuum should be turned off immediately. Clear the substance that is
blocking the flow of air completely before you start the vacuum again.
Do not operate the vacuum
cleaner too close to heaters,
radiators, ovens etc...
Before using the vacuum
cleaner, please remove any
large or sharp objects from
the floor in order to prevent
the filter being damaged. Do
not use the vacuum to clean
anything that is flammable
such as gas or cigarettes.
3

Assembly
nstall the main brush
If you want to use the brush, it can
be easily installed as shown to the
right.
nstalling connection joint
Insert the 2-in-1 crevice/brush tool
into the connecting joint. It will not
click into place. Then insert the
connecting joint into the main
body, and it WILL click into place.
To disassemble the 2-in-1
crevice/brush tool from the pole,
pull the 2-in-1 tool straight out
from the connecting joint. Press
the red pole attachment release
button, then remove the
connecting joint.
nstalling Extended Aluminium
Tube
The aluminium tube can be used to
extend the reach of the vacuum so
it can be used as a vertical vacuum
cleaner.
Once installed, the main brush can
then be connected to the end of
the tube to clean floors/carpets.
The multi-crevice nozzle can also
be attached for cleaning ceilings,
curtains and other difficult to clean
surfaces.
Removing/ nstalling Dust Cap
a) Remove dust cap from the
body: Push the release button
for the dust cup, then remove
the dust cup from the body.
b) Install dust cap on body: first
make the underside of the dust
cup to connect with the body.
(Please pay attention to the
fitting position and direction),
then push the dust cup to close
with the body. The dust cup
will be locked once you hear
the clicking noise. Fig A Fig B
4

nstalling/Removing Battery Pack
a) Removing: slide and hold
the red battery release
button located on the
bottom of the main body.
The battery will slide out.
b) Installing: slide the battery
along the guide until you
hear it click into place.
Fig A Fig B
Brush Roller Disassembly and
nstallation
a) Firstly, as shown in the
image to the right, the roller
can be unlocked by turning
the lock anticlockwise to
the open position, at which
point you can remove the
cover plate on the side. You
can then remove the roller.
Disassembly
5