Kogan V10 User manual

STAIN CLEAN WINDOW
VACUUM CLEANER V10
KAVACWIN10A

Warning Symbols
The following warnings are used in this user guide and on the packaging.
Do not use bleach
Do not tumble dry
Do not dry clean
Washable at 60°C
Do not iron
IPX4
Protected against splashing water from
all directions.
General Safety Instructions
•Before using the product, familiarise yourself with all the safety information and
instructions. Retain this user guide for future reference.
•Risk of loss of life or accident to infants and children. Never leave children unsupervised
with the packaging material.
•The packaging material represents a danger of suffocation. Children frequently
underestimate the dangers. Always keep children away from the packaging material.
•This product can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. The product shall not be left unattended
while it is connected to the supply mains. Keep the product out of reach of children
when it is energised.
•Children shall not play with the product.
•Cleaning and maintenance shall not be made by children without supervision.
•Warning! Misuse may lead to injury. Use this product solely in accordance with these
instructions. Do not attempt to modify the product in any way.
•Attention! Risk of product damage! Do not expose the product to direct sunshine or
heat. The ideal ambient temperature is between +5 and +35 °C. Extreme low or high
temperature may damage the battery or the product.
SAFETY & WARNINGS

Electrical Safety
•Danger! Risk of electric shock! Never attempt to repair the product yourself. In case of
malfunction, cease use immediately and contact help.Kogan.com for support.
•Warning! Risk of electric shock! Do not immerse the product in water or other liquids.
Never hold the product under running water.
•Warning! Never use a damaged product. Disconnect the product from the power,
cease use immediately and contact help.Kogan.com for support.
•Warning! Risk of injury! Switch the product off and disconnect it from the power supply
before cleaning work and when not in use.
•Warning! This product contains a Lithium-long rechargeable battery that is only
replaceable by skilled persons. Do not throw the product into a fire.
•Do not operate the product while it is being charged.
•Always charge the product in an open area away from flammable materials and
liquids. Misuse can cause fire and burns.
•The product is not to be used if it has been dropped if there are visible signs of damage
or if it is leaking.
•Protect the connection cord against damages. Do not let it hang over sharp edges, do
not squeeze or bend it. Keep the connection cord away from hot surfaces and open
flames. Ensure that nobody can pull on or trip over it unintentionally.

OVERVIEW
Release button
Power button
Dirty water
container
Charging socket (with cover)
Vacuum attachment
Suction head
Eject button
Main unit

Spray nozzle
Wiper
Spray bottle
USB-A to USB-C cable
Cleaning pads (x2)

1. Place the vacuum attachment onto the suction head.
2. Prior to attaching the wiper, fill the water container with water and/or cleaning
detergent. Do not exceed the water container's maximum capacity of 360 ml.
Note: Do not use abrasive or aggressive cleaning detergents. These could damage
the product.
3. Screw the wiper onto the water container.
4. Unfasten the hook-and-loop strap on the side of the cleaning pad.
5. Attach a cleaning pad onto the wiper.
6. Fasten the hook-and-loop strap of the cleaning pad.
•Remove all packaging materials. Check if all parts are complete.
•The product's built-in battery is not charged on delivery. Charge the battery completely
before first use.
Charging
1. Always ensure the product is turned off before
charging.
2. Connect the USB cable to the product.
3. Connect the USB cable to a DC 5V (6W max)
USB power adapter (not supplied). The power
button indicator will turn red.
4. When the battery is fully charged, the power
button indicator will turn blue.
5. Disconnect the USB cable.
Notes:
•Do not leave the product permanently connected to the power adapter to avoid
damage to the battery or the product.
•Ensure the charging socket always closed during operation to avoid water ingress.
•Do not obstruct the ventilation slots during operation. Blocked ventilation can result in
overheating and damage to the product.
ASSEMBLY
BEFORE FIRST USE

Power button
Indicator
Status
Solid Blue
Power on. Fully charged (while charging)
Solid Red
Charging
Red flashing (slow)
Low power.
Red flashing (fast)
Battery empty. The product will turn off after 1 minute.
Cleaning Windows
1. Rotate the spray nozzle to the desired setting:
oStream Jet stream
oSpray Water mist stream
oOff No stream
2. Spray the window.
3. Wipe over the sprayed areas with the wiper. This will loosen stubborn dirt.
Turning the product on/off
1. Press the power button, the product will turn on and the indicator turns blue.
2. Press the power button again, to turns the product off. The indicator will turn off.
Vacuuming Windows
1. Turn on the product.
2. Move the blade of the vacuum attachment slowly from top to bottom.
Note: For best cleaning results, briefly dry the rubber wiper of the vacuum attachment
with a clean cloth after each removal.
3. When the MAX marking on the dirty water container is reached, turn off the
product.
4. Remove the dirty water container from the main unit. Remove the protective cap
and empty the dirty water.
5. Replace the dirty water container before resuming operation.
Note: Do not hold the product upside down. Do not move the product sideways.
OPERATION

•Before cleaning, always disconnect the product from the USB cable.
•Warning: Do not immerse the product's electrical components in water or other liquids.
Never hold the product under running water.
•Do not use any abrasive, aggressive cleaners or hard brushes to clean the product and
its accessories.
Cleaning and Storage
•Protect the product against dust and direct sunlight.
•Store the production in a cool, dry place, protected from moisture and out of the reach
of children.
•Product the product against heat. Do not place the product close to open flames or
heat sources such as stoves or heating appliances.
Cleaning the Vacuum Attachment, Suction Head and Main Unit
1. Press the release button to remove the vacuum attachment from the suction
head.
2. Press the eject buttons to remove the suction head from the main unit.
3. Wipe down the parts with a slightly damp cloth.
4. Do not let any water or other liquids enter the product interior.
5. After cleaning, allow all parts to dry completely before reassembling.
Cleaning the Water container, DirtWater Container and Wiper
1. Rinse the parts in water and/or mild detergent.
2. After cleaning, allow all parts to dry completely before reassembling.
CLEANING & CARE

Washing the Cleaning Pads
The cleaning pads can be cleaned in a washing machine.
Do not use bleach
Do not dry clean
Do not iron
Do not tumble dry
Washable at 60°C
1. Clean the cleaning pads on a mild setting, up to 60°C.
2. After cleaning, allow to dry completely before reassembling.
Storage
•Before storing the product ensure the water container and dirty water containers are
empty.
•Regularly charge the battery (for example: monthly) if you do not use the product for a
long period of time. This is necessary to preserve the battery.