Kogan C10 Pro KAVACSTC10A User manual

1
C10 Pro Cordless 29.6V Stick Vacuum Cleaner
KAVACSTC10A
Quick Start Guide
Table of Contents
Safety & Warnings............................................................................................................................................. 2
Overview ...............................................................................................................................................................3
Assembly Instructions.....................................................................................................................................4
Operation.............................................................................................................................................................. 5
Cleaning & Care..................................................................................................................................................6
Specification........................................................................................................................................................8
Troubleshooting .................................................................................................................................................8
In The Box.............................................................................................................................................................9

2
Safety & Warnings
To reduce the risk of fire, electric shock or injury to persons or property, the following
basic safety precautions should always be followed.
•Never use this appliance with a damaged cord, plug or other damaged parts.
Check if the voltage indicated on the label corresponds with the local mains
voltage before you connect the appliance.
•Always ensure the charging connector, cord and plug are dry. Never immerse
the appliance into the water or any other liquid. Do not rinse it under a tap
except for the dust cup, the HEPA filter and the rolling brush parts.
•Always ensure that your hands are dry before removing the plug from the mains
outlet. Never pull the plug out of the mains outlet by its cord.
•Children should always be supervised to ensure that they do not play with this
appliance.
•The appliance should not be used by adults or children who lack experience,
product knowledge or disability which might cause a hazard, unless they have
been correctly instructed.
•Always keep the battery pack far from fire and flammable items.
•Never use this appliance to suck liquids, glass, metal fragments and burning
things such as ashes, cigarette butts, matches and so on.
•Always ensure that the dust cup and the battery pack are installed before using.
•If the cord, plug and any other parts get damaged or the appliance fall into
water, please stop use and immediately unplug from the main power. Never
disassemble the main body, repair or replace any parts by yourself.
Do not use non-original parts with the unit as it may cause damage.

3
Overview
Part List
1. Main unit
2. Dust cup
3. Cyclone cone
4. HEPA filter
5. Battery pack
6. Electrical tube
7. Floor brush

4
Assembly Instructions
The appliance is packed as separated parts. Simple assembly is required before use:
1. Insert the battery pack into main body as picture shows. You will hear a click sound
when fitted.
2. Connect the tube to the main body.
3. Connect the floor brush to the tube.
Functional Buttons

5
Operation
Lithium Battery Charging
Attention: Please use original charger or the lithium battery can be damaged.
The battery needs to be charged when the indicator lights twinkle. The lights keep
twinkling while charging and turn green when fully charged.
Start/stop working and switch speed
Press the ON/OFF button to start and stop the machine.
Press the touch panel to switch speeds. The blue light means the highest speed is active
and the green light shows the eco speed is active.

6
Cleaning & Care
Dust cup cleaning and maintenance
Method 1:Press the dust drop button and empty the dust into a rubbish bin.
Method 2:Press the dust cup release button and take out the dust cup from the main
body as the picture below.
Take off the HEPA filter and cyclone cone, empty all the rubbish and clean it. Install them
back as the picture below after the parts have air dried.
Attention: Do not use the machine before reinstalling the HEPA filter and cyclone cone or
it may damage the unit.

7
Floor brush cleaning and maintenance
Step 1: Press the roll brush release button.
Step 2: Take the roll brush out.
Step 3: Wash the roll brush and dry it. Fix it back as the pictures below.
Step 4: Reset the roll brush release button to the lock position.
Machine storage
Please put the machine into the storage base when not in use.
Please note
A new unit may become hot with a slight plastic odour after running the motor at high
speed for several minutes. This is normal and not a cause for concern.

8
Specifications
Motor rated voltage and rated power 29.6V 300W
Floor brush rated voltage and rated power 29.6V 15W
Lithium battery 29.6V 2500mAh
Charger input ~100-240V 50/60Hz
Charger output ~35V 0.5A
Charging time 4-5 hours
Noise ≤70dB
Rated Continuous Working Time
15 minutes at high speed
40 minutes at mid speed
80 minutes at low speed
Product size 390x227x108mm (main body）
Product net weight 1.42kg（main body)
Troubleshooting
Problem
Possible causes
Resolutions
Not working
•No power
•Brush protected or
obstructed
•Charging
•Restart the machine
Weak suction
•Dust cup is full of rubbish
•HEPA filter is full of dust
•Floor brush or electrical tube
has been clogged by hair or
large pieces of rubbish
•Clean the dust cup’s
rubbish
•Clean or change the HEPA
filter
•Clean the floor brush or
electrical tube’s inner
rubbish
No LED light
is shown
when
charging
•Battery pack is not installed
in right position
•The adaptor’s connector is
not inserted in the charging
hole
•Install the battery pack in
right position
•Push the adaptor’s
connector into the charging
hole in right position
Not full
battery after
charging
•Charging time is not enough
•Battery is aging
•Charge for enough time as
instructed
•Replace battery

9
Floor brush
not working
•Large particles or objects
vacuumed
•Blanket resistant strength is
too hard and protected
itself.
•The brush roll is entangled
by hair or wire
•Clean the floor brush and
restart the machine
•Turn off the machine and
take the floor brush a little
high of the blankets leave
some space between floor
brush and blankets and
restart the machine
•Clean the brush from hair,
wire or other things
In The Box
•Main body
•Electrical tube
•Floor brush
•Adaptor
•Battery pack
•Storage base
•User’s manual
•Stretch brush
•Crevice tool
User manual is subject to change without notice. For the latest version of your user manual, please
visit https://www.kogan.com/usermanuals/