Kohler 11623 User manual

All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Shut off the water supplies to the fitting.
2. Observe all local plumbing and building codes.
3. Please keep shower head and the shower arm away from heater, or it may become damaged and cause
injury to the user.
1069822-2A-C 1
11623 16347 CEILING-MOUNT SHOWER ARM
16346 WALL-MOUNT SHOWER ARM
BEFORE YOU BEGIN
INSTALLATION INSTRUCTIONS
Shower Arm
ROUGH-IN DIMENSIONS
11623 16347
16346
G1/2"
Ø65
G1/2"
66
G1/2" Ø65
254(for 16347) 127(for 11623)
463
G1/2"

1069822-2A-C 2
INSTALLATION
CLEANING INSTRUCTIONS
All finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean
soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
Install the G1/2" nipple(1, not provided) to the pipe so it extends
10~14mm beyond the finished wall.
Apply a ring of plumbers putty around the back surface of the
escutcheon(2). Apply tape or thread sealant to the nipple threads, and
install the shower arm(3), tighten with a strap wrench. Adjust the
escutcheon and make sure it against the wall. Remove any excess
putty.
Flush both water supplies through the shower arm for one minute to
remove debris.
12
3
10~14mm
10~14mm
1
3
2