Kohler ARCHER K-2595-GW User manual

Features
•Slotted overflow for maximum bathing depth
•Integral lumbar support
•Molded armrests for extra comfort
•Airjets release thousands of bubbles that surround, support and
massage the body
•Variable-speed blower lets you adjust the airjet massage to 18
levels
•Immediate and manual purge cycles remove residual water
from air channels after use
•Bask™Heated Surface provides soothing warmth on your back
and neck
•Three heat settings allow you to customize the surface
temperature Codes/Standards
ASME A112.19.7/CSA B45.10
•Lighted keypad controls CSA B45.5/IAPMO Z124
•Textured Bottom Surface UL 1795
•Two-piece design
•67-3/4" (1568 mm) x 31-3/4" (806mm) x 22" (559 mm) See website for detailed warranty information.
•End Drain Placement
•Requires 120V electrical service Available Color/Finishes
Material Color tiles intended for reference only.
•Exocrylic™DescriptionCodeColor
Hydrotherapy SandbarG9
•BubbleMassage
Installation
•Freestanding Bath
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
11-12-2014 01:41
ARCHER®
68" FREESTANDING BUBBLEMASSAGE™BATH WITH BASK™
HEATED SURFACE
K-2595-GW

No change in measurements if connected
Notes
Required Electrical Service Measure your actual product for roughing-in
details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD). Install this product in accordance with the
installation instructions.
120 V, 15 A, 60 HzBlower, Heated
Surface: Locate a GFCI-protected 120 V, 15 A, grounded
duplex electrical outlet within 24" (610 mm) of the
Technical Information bath junction box. A 40" (1016 mm) cable is
included.
All product dimensions are nominal.
FreestandingInstallation: Locate the outlet behind the bath and within 24"
(610 mm) of the blower motor.
ReversibleDrain location:
51-1/16" x 19-11/16" (1297 mm x 500 mm)Basin area, bottom: Remote blower installation kit K-1446 is available
for relocating the blower.
58-9/16" x 25-5/16" (1487 mm x 643 mm)Basin area, top:
105 lbs (47.6 kg)Weight: NOTICE: Do not support the load weight of the
bath by the rim.
44.5 lbs/ft²(217.3 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth: NOTICE: Confirm adequate support for rim-mount
faucet. Using faucets as a means of support are
not appropriate or safe for this installation.
65 gal (246.1 L)Water capacity:
Blower: 120 V, 15 A, 60 Hz, 300 W
Heated Surface: 120 V, 1.1 A, 60 Hz, 65
W
Electrical rating:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
VariablePump speed:
3-speedPump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
11-12-2014 01:41
ARCHER®
68" FREESTANDING BUBBLEMASSAGE™BATH WITH BASK™
HEATED SURFACE
K-2595-GW