Kohler C3-050 User manual

Features
•Hybrid heater provides continuously heated water for consistent
comfort.
•Stainless steel wand with automatic UV-light self-sanitization.
•Front and rear wash modes provide warm water for cleansing.
•Adjustable water temperature and water pressure.
•Quiet-Close™lid closes slowly and quietly without slamming.
•Quick-Release™hinges allow seat to be unlatched from toilet
for easy removal and convenient cleaning; no tools required.
•Grip-Tight bumpers hold seat firmly in place.
Installation
•Requires connection to toilet water supply line. All hoses and
connections are included. Codes/Standards
•Additional included components: T-fitting, inlet water supply
hose, and seat mounting bracket. ASME A112.4.2/CSA B45.16
UL 1431
•Requires Phillips screwdriver and adjustable wrench for
installation. CSA C22.2 No. 68
CSA C22.2 No. 64
•Dedicated electrical GFCI circuit required (120V, 15A, 60Hz,
1800W). KOHLER®Intelligent Toilet and C3®
Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-25-2019 06:26 - US/CA
C3®-050
Elongated Cleansing Toilet Seat
K-18751

18-5/8"
Notes
Required Electrical Service Install this product according to the installation
guide.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD). Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi - 80
psi (139 kPa - 551 kPa).
120 V, 15 A, 60 Hz
Technical Information Do not install this seat in a location where: (1)
water might be splashed on the product or (2)
All product dimensions are nominal.
ElongatedSeat shape type: excessive moisture, high humidity levels, or
condensation is present. This will avoid damage
to the electronic components.
Closed-frontSeat front type:
5-1/2" (140 mm)Seat-mounting holes:
Do not use an extension cord with this product.
43" (1092 mm)Power cord length:
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
Locate the recepticle at least 6" (152 mm) above
the floor, and within a 32" (813 mm) radius
measured 2" (51 mm) from the bowl ledge.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-25-2019 06:26 - US/CA
C3®-050
Elongated Cleansing Toilet Seat
K-18751