Kohler C3-325 User manual

C³™-325
Elongated bidet toilet seat with remote control
K-28119
Features
•Sleek, handheld remote control with two programmable user
presets
•Front and rear wash modes provide warm water for cleansing
•Three-level adjustable nozzle position, water temperature,
and water pressure
•Bidet wand rotates to deliver three personal cleansing spray
modes; stream, mist, and air mist
•Stainless steel wand is automatically cleaned before and
after each use
•3D wash feature oscillates spray back-and-forth and side-to-
side
•Spa Spray mode activates air mist spray while automatically
changing water temperature for a comfortable spray
•Boost spray automatically adjusts rear spray mode to highest
pressure
•Child mode with soft, gentle wash provides a safe experience
•Heated seat with adjustable temperature settings
•Warm-air drying system with adjustable temperature settings
•Automatic deodorization with carbon filter for odor control
•Power-save mode monitors usage and adjusts heated seat
settings to save energy
•Quiet-Close™functionality to prevent seat from slamming
•Grip-Tight bumpers hold seat firmly in place
•Quick-Release™functionality allows seat to be removed
easily from toilet for convenient cleaning
•Fits most elongated toilets
Material
•Plastic construction
Installation
•Requires connection to toilet water supply line. All hoses and
connections are included
•Requires dedicated electrical GFCI circuit (120V, 15A, 60Hz)
Codes/Standards
UL 1431
CSA C22.2 No. 64
CSA C22.2 No. 68
KOHLER®Intelligent Toilet and C3™
Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-6-2023 03:12 - US/CA/LM/MX

C³™-325
Elongated bidet toilet seat with remote control
K-28119
2-1/4"
(57 mm)
1"
(25 mm)
10-1/16"
(256 mm)
19-3/4"
(502 mm)
1-1/4"
(32 mm)
Min
7-7/8"
(200 mm) 11-15/16"
(303 mm)
6-11/16"
(170 mm)
21-1/4"
(540 mm)
5-1/2"
(140 mm)
13-1/4"
(337 mm)
Min
15-11/16" (398 mm)
16-3/8"
(416 mm)
1-1/2"
(38 mm)
2"
(51 mm)
6" (152 mm) Min
32" (813 mm) R.
Remote Control
Electrical Service Detail
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Bidet toilet seat: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Seat shape type: Elongated
Seat front type: Closed-front
Seat-mounting
holes:
5-1/2" (140 mm)
Electrical component
rating:
Bidet toilet seat: 120 V, 15 A, 60 Hz,
1450 W
Power cord length: 51" (1295 mm)
Notes
Install this product according to the installation
guide.
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
CAUTION: Risk of property damage. A single
extension cord may be used provided the cord
“Type” begins with “SJ”, 12 gauge, grounded
(12/3), no longer than 25 feet, and plugged into
a GFCI outlet. Promptly replace any extension
cord that exhibits any sign of damage.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi -
80 psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1)
water might be splashed on the product or
(2) excessive moisture, high humidity levels,
or condensation is present. This will avoid
damage to the electronic components.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-6-2023 03:12 - US/CA/LM/MX