Kohler OVE K-24719T-S2 User manual

OVE
INSTALLATION INSTRUCTIONS
VITREOUS CHINA WALL-HUNG P-TRAP TOILET
K-24719T-S2/K-24719T-2/K-24720T-S2/K-24720T-2/K-24721T-S2/K-24721T-2
K-24083T-GS2/K-24081T-CPS2/K-24081T-BNS2/K-24082T-CPS2/K-24082T-BNS2
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
·
·
·-
( 100 ) .......K-24719T-S2
..............................................................K-19957T-2
100
........................K-6281T-VES2
( 100 )..........K-24719T-2
..............................................................K-19957T-2
100
...........................K-6281T-VE2
( 300 ) ..............K-24720T-S2
..............................................................K-19957T-2
300
.......................................K-4178T-VES2
( 300 ).................K-24720T-2
..............................................................K-19957T-2
300
.........................................K-4178T-VE2
( 100 ) ..............K-24721T-S2
..............................................................K-19957T-2
100
.......................................K-6284T-VES2
( 100 ).................K-24721T-2
..............................................................K-19957T-2
100
.........................................K-6284T-VE2
........................................K-17676T
...............................................K-17671T
........................................K-17676T
...............................................K-17671T
........................................K-17676T
...............................................K-17671T
ORDERING INFORMATION
OVE WH Toilet(HT100 TL IWT)..........................K-24719T-S2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 100
Touchless Inwall Tank..................K-6281T-VES2
Includes
OVE WH Toilet(HT100 TL IWT) ............................K-24719T-2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 100
Touchless Inwall Tank ....................K-6281T-VE2
Includes
OVE WH Toilet(HT300 MEC IWT) ......................K-24720T-S2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 300
Inwall Tank with Frame ................K-4178T-VES2
Includes
OVE WH Toilet(HT300 MEC IWT) ........................K-24720T-2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 300
Inwall Tank with Frame...................K-4178T-VE2
Includes
OVE WH Toilet(HT100 MEC IWT) ......................K-24721T-S2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 100
In-Wall Tank with Frame ..............K-6284T-VES2
Includes
OVE WH Toilet(HT100 MEC IWT) ........................K-24721T-2
Includes Bowl...................................................K-19957T-2
Includes HYDRO-TOWER 100
In-Wall Tank with Frame.................K-6284T-VE2
Includes
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Toilet Seat...................................K-17671T
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Toilet Seat...................................K-17671T
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Toilet Seat...................................K-17671T
®
®
®
®
®
®
-1-
KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD,
JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436
( ) 158 200436
©
©
Copyright Kohler China Investment Co., Ltd. 2018
2018
1363380-T01-B

( )..................K-24083T-GS2
........................................................K-80175T-GS2
.........................................................K-77682K-G
( , ) ..............K-24081T-CPS2
......................................................K-24084T-DPS2
.........................................K-30947T-CP
( , / )...K-24081T-BNS2
......................................................K-24084T-DNS2
.........................................K-30947T-BN
( , ) ..............K-24082T-CPS2
......................................................K-24084T-APS2
.........................................K-30948T-CP
( , / )...K-24082T-BNS2
......................................................K-24084T-ANS2
.........................................K-30948T-BN
........................................K-17676T
........................................K-17676T
........................................K-17676T
........................................K-17676T
........................................K-17676T
OVE WH Toilet (BEAM M FV)..........................K-24083T-GS2
Includes Bowl .............................................K-80175T-GS2
Includes BEAM Manual Toilet/Squat
Flush Valve.......................................K-77682K-G
Includes
OVE WH Toilet (BEAM SR D/CP)..................K-24081T-CPS2
Includes Bowl ...........................................K-24084T-DPS2
Includes BEAM Toilet Sensor (DC) ..............K-30947T-CP
Includes
OVE WH Toilet (BEAM SR D/BN)..................K-24081T-BNS2
Includes Bowl ...........................................K-24084T-DNS2
Includes BEAM Toilet Sensor (DC) ..............K-30947T-BN
Includes
OVE WH Toilet (BEAM SR A/CP)..................K-24082T-CPS2
Includes Bowl ...........................................K-24084T-APS2
Includes BEAM Toilet Sensor (AC)...............K-30948T-CP
Includes
OVE WH Toilet (BEAM SR A/BN)..................K-24082T-BNS2
Includes Bowl ...........................................K-24084T-ANS2
Includes BEAM Toilet Sensor (AC)...............K-30948T-BN
Includes
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Quiet-close Toilet Seat ...............K-17676T
OVE Quiet-close Toilet Seat ...............K-17676T
®
®
®
®
®
TOOLS AND MATERIALS REQUIRED
(Not supplied)
·254mm adjustable wrench
Metal file (file cut)
Tape measure
Tubing cutter
Level
Hacksaw
Putty knife
Screwdriver
Straight pipe coupling
Connection packing
·
·
·
·
·
·
·
·
·
()
·
·
·
·
·
·
·
·
·
·
254mm
NOTES
·
·
·
·
·
·
·
·
·
Observe all local plumbing and building codes.
Shut off the water supply.
For values of seat post hole centers, please refer to
dimension.
Passageways is 60mm.
Please refer to actual for the value of water depth from rim.
Ensure that the new drain and shut-off valve have the
correct roughing-in dimensions. .
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
Carefully inspect the new bowl for any sign of damage.
See Fig.#1
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2018).
This product complies with GB 25502-2017.
Water Efficiency Grade 2 for K-24719T-S2/K-24719T-2/K-
24720T-S2/K-24720T-2/K-24721T-S2/K-24721T-2/K-
24081T-CPS2/K-24081T-BNS2/K-24082T-CPS2/K-
24082T-BNS2.
Water Efficiency Grade 3 for K-24083T-GS2.
·
·
·
·
·
·
·
·
·
·
60mm
1
ASME (A112.19.2-
2018)
GB 25502-2017
K-24719T-S2/K-24719T-2/K-24720T-S2/K-24720T-2/K-
24721T-S2/K-24721T-2/K-24081T-CPS2/K-24081T-
BNS2/K-24082T-CPS2/K-24082T-BNS2 2
K-24083T-GS2 3
·
-2-
1363380-T01-B

-3-
ROUGHING-IN
Fig.#1
1
Kohler reserves the right to change marked dimensions without prior notice.
Reference Value UNIT: mm
44
540
56
135
225
400
27
360
180
335 391
325
420
284
286 160 260 360
102
of Outlet
C
L
INSTALLATION
1. Install Flushing Mechanism
1-1. Install The Tank
1) Turn the water supply off before installing the new toilet.
2) Install the concealed tank system in wall before decorating
the wall.
3) Install the tank system per tank's installation instructions.
4) Refer to installation instructions of in-wall tank for SKU of
faceplate.
1-2. Install Manual Valve Or Sensor
Refer to installation instructions of manual valve or sensor for
the installation of flushing mechanism.
1.
1-1.
1)
2)
3)
4)
1-2.
1363380-T01-B

-4-
2. Set The Spacing Of The Bowl
After you install the tank, be careful to set the spacing of the
bowl on wall according to the dimensions as shown.
2.
Fig.#2
2
180
360
225
325
1
Carrier Studs
25 2
Unit: mm
:
3. Attach Connection Pipe
Attach pipe with gasket to the inlet to link to the concealed
tank.
Attach pipe with gasket to the outlet.
*Apply gasket for sealing the bowl to wall.
You may apply some lubricant to help connect smoothly.
3.
*
·
·
·
·
·
·
Fig.#3
3
Inlet
Outlet
1363380-T01-B

-5-
4. Install The New Bowl
Apply a little silicone sealant along the edge, to fill the gap
between bowl and wall.
4.
4a
See Fig. 4a.
Fig. #4a
4a
1
Fig. #4b
4b
Place the new bowl on the wall through the carrier. Wrench
the nut to tighten and make them attached securely.
Torque for tightening nuts is recommended to be within
the range from 8 Nm to 12 Nm.
4b
8Nm 12Nm
See Fig. 4b.
·
·
Fig. #4c
4c
Fig. #4d
4d
Adjust to horizontal and finish tightening.
4c
See Fig. 4c. Apply sealant to make sure the bowl's edge seals to the wall.
4d
See Fig. 4d.
1. Ensure that all the connections are tight.
2. Turn on the water supply and check for any leaks.
3. Flush the toilet to check for correct operation.
1.
2.
3.
FINISH THE INSTALLATIONFINISH THE INSTALLATION
1363380-T01-B

-6-
CONSUMER RESPONSIBILITIES
When cleaning up after installation, do not use abrasive
cleansers, as they may scratch and dull the toilet surface.
Use warm water and a liquid detergent to clean the surface.
Remove stubborn stains, paint, or tar with turpentine or paint
thinner. Do not allow cleaners containing petroleum distillates
to to remain in contact with any toilet surface for long periods
of time.
Remove plaster by carefully scraping with a wood edge. Do
not use metal scrapers, wire brushes, or other metal tools.
Use a powder type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
Clean the outside surface of your vitreous china product with
mild soap and warm water. Wipe the entire surface
completely dry with a clean, soft cloth.
Most toilet bowl cleaners are not harmful to the vitreous china
surface of the toilet bowl. Please follow the bowl cleaner
manufacturer is instructions carefully.
Do not use abrasive cleaners or solvents.
()
0C
o
WARNING: Risk of property or product damage.
Do not use in-tank cleaners. Products containing
chlorine (calcium hypochlorite) can seriously damage
fittings in the tank. This damage can cause leakage
and property damage.
Kohler Company shall not be responsible or liable for any
damage to these tank fittings caused by the use of cleaners
containing chlorine (calcium hypochlorite).
CAUTION: Do not use any cement while installing
the toilet.
WARNING: Risk of product damage.
Heat expansion of the toilet may damage
the feet of the toilet. Kohler will not be responsible for
any damage because of using cement.
Do not throw into the toilet what is easy to block it,
such as newspaper, paper pilch, sanitary towel.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
o
1363380-T01-B

-1-
HYDRO-TOWER 300 300
INSTALLATION INSTRUCTIONS
IN-WALL TANK
K-4179T/K-4179T-VLS/K-4179T-DNSW
K-4179T-DNW/K-4179T-VABW/K-4179T-RES
K-4178T/K-4178T-VES2/K-4178T-VE2/K-4178T-ESS
K-10611T/K-10611T-RES/K-10611T-ESS
K-10611T-VLS/K-10611T-VLSL/K-4177T
K-8857T/K-20341T/K-75890T/K-75891T/K-77271T
KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD,
JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436
( ) 158 200436
Ordering Information
HYDRO-TOWER 300 In-Wall Tank(With Frame) ..................................................................................................................K-4178T
3.0/6.0L HYDRO-TOWER 300 INWALL TANK WITH FRAME(OVE WH) ...................................................................K-4178T-VES2
3.0/6.0L HYDRO-TOWER 300 INWALL TANK WITH FRAME(OVE WH) .....................................................................K-4178T-VE2
3.5/6.0L HYDRO-TOWER 300 INWALL TANK WITH FRAME(ESCALE WH)...............................................................K-4178T-ESS
HYDRO-TOWER 300 3.0/4.5L In-Wall Tank With Frame ......................................................................................................K-4179T
3.5/5.0L HYDRO-TOWER 300 IWT W/ FRAME(VEIL WH) ...........................................................................................K-4179T-VLS
3.5/5.0L HYDRO-TOWER 300 IWT W/ FRAME(ODEON WH)..................................................................................K-4179T-DNSW
3.5/5.0L HYDRO-TOWER 300 IWT W/ FRAME(ODEON WH) ....................................................................................K-4179T-DNW
3.5/5.0L HYDRO-TOWER 300 IWT W/ FRAME(VIA WH) .........................................................................................K-4179T-VABW
3.5/5.0L HYDRO-TOWER 300 IWT W/ FRAME(REVE WH) ........................................................................................K-4179T-RES
HYDRO-TOWER 300 3.0/4.5L In-Wall Tank Without Frame ...............................................................................................K-10611T
3.5/5.0L HYDRO-TOWER 300 MEC IWT W/O FRAME(REVE WF) ...........................................................................K-10611T-RES
3.5/5.0L HYDRO-TOWER 300 IWT W/O FRAME(ESCALE WF) ................................................................................K-10611T-ESS
3.0/4.5L HYDRO-TOWER 300 MEC IWT W/O FRAME(VEIL WF)..............................................................................K-10611T-VLS
3.0/4.5L HYDRO-TOWER 300 MEC IWT W/O FRAME(VEIL WF)............................................................................K-10611T-VLSL
DROPLET In-Wall Tank Faceplate (Not Supplied) ................................................................................................................K-4177T
BEVEL In-Wall Tank Faceplate (Not Supplied)......................................................................................................................K-8857T
PEBBLE In-Wall Tank Faceplate(Not Supplied) ..................................................................................................................K-20341T
LYNK Faceplate (Not Supplied)...........................................................................................................................................K-75890T
NOTE In-Wall Tank Faceplate(Not Supplied) ......................................................................................................................K-75891T
MEMOIRS Faceplate (Not Supplied)...................................................................................................................................K-77271T
!
!
!
!
!
Read installation guide in illustration and word file carefully, and install the tank according to instructions in the guide to avoid
product damage and installation inconvenience caused by inappropriate operation.
All data contained is based upon the last product information available at the time of publication. Kohler Company reserves
the right to implement changes of product characteristics, packaging and availability at any time without further notice.
Do not apply erosive cleanser and solvent in the tank, which will damage tank spares and result in leakage in the tank.
Kohler will not be responsible for any damage related to above mentioned cleanser or solvent. Mild detergent can be used.
Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the
installation of Kohler spares. Kohler will not be responsible for any damage related to installation with spares not provided by
Kohler.
This product complies with GB26730-2011.
!
!
!
!
!GB26730-2011
BEFORE YOU BEGINBEFORE YOU BEGIN
©
©
Copyright Kohler China Investment Co., Ltd. 2018
2018
1263048-T01-D

-2-
300 ( )...............................................................................................................................K-4178T
3.0/6.0 300 ( ) .........................................................................................................K-4178T-VES2
3.0/6.0 300 ( )............................................................................................................K-4178T-VE2
3.5/6.0 300 ( ) ....................................................................................................K-4178T-ESS
300 3.0/4.5 ....................................................................................................................................K-4179T
3.5/5.0 300 ( )............................................................................................................K-4179T-VLS
3.5/5.0 300 ( ) ....................................................................................................K-4179T-DNSW
3.5/5.0 300 ( ).......................................................................................................K-4179T-DNW
3.5/5.0 300 ( ) ........................................................................................................K-4179T-VABW
3.5/5.0 300 ( ) ...........................................................................................................K-4179T-RES
300 3.0/4.5 .......................................................................................................................K-10611T
3.5/5.0 300 ( ) .............................................................................................K-10611T-RES
3.5/5.0 300 ( ) ......................................................................................K-10611T-ESS
3 /4.5 300 ( ) ..............................................................................................K-10611T-VLS
3 /4.5 300 ( ) ............................................................................................K-10611T-VLSL
( ).........................................................................................................................................K-4177T
( ).........................................................................................................................................K-8857T
( )..............................................................................................................................................K-20341T
( ) ..........................................................................................................................................K-75890T
( ) .................................................................................................................................................K-75891T
( ) ..........................................................................................................................................K-77271T
.0
.0
!
!
Design And Installation Concept Of In-wall Tank
!
!
Installation of in-wall tank is much easier and nice-looking comparative to that of traditional tank. Meanwhile, the space
layout will be more reasonable due to the application of in-wall tank pipes and connectors.
The most remarkable advantage of in-wall tank is that the installation will never be limited to certain area, and can be
installed wherever as you wish, which will make the bathroom layout more reasonable and nice-looking, and make good use
of every inch of the bathroom space.
!
!
!
!
!
Function Explanation
!
!
!
!
!
Anti flow-backwards
Adjustment of inlet water level
Adjustment of flushing volume
Single/double gear
Assemble, disassemble and
maintenance can be done without
tools.
flushing
1263048-T01-D

SPECIFICATIONS
Liter per flushing
Temperature
Environmental temperature: 1 ~55
Water temperature: 1 ~45
°C °C,
°C °C
°C °C
°C °C
1 ~55
1 ~45
Full flushing volume:
Half flushing volume:
6.0L
3.0L
6.0L
3.0L
Full flushing volume:
Half flushing volume:
6.0L
3.5L
6.0L
3.5L
K-4179T
K-10611T
K-10611T-VLS
K-10611T-VLSL
K-4179T-VLS
K-4179T-DNSW
K-4179T-DNW
K-4179T-VABW
K-4179T-RES
K-10611T-RES
K-10611T-ESS
K-4178T
K-4178T-VES2
K-4178T-VE2
K-4178T-ESS
Full flushing volume: 4.5L
Half flushing volume: 3.0L
4.5L
3.0L
Full flushing volume: 5.0L
Half flushing volume: 3.5L
5.0L
3.5L
Water Supply
Min water supply: 0.02MPa (dynamic pressure)
Max water supply: 0.74MPa (static pressure)
0.02MPa ( )
0.74MPa ( )
!
!
!
!
!
!
!
!
Advantages Of In-wall Tank
!
!
!
!
!
!
!
!
Made of macromolecular materials that prevents corrison and leaking.
Will not affect the structure of the wall and provides excellent sound insulation.
Easy installation and time efficient.
.
.
Clean, garbage free, and space .
Advanced water tank fitting, which makes possible the adjustment of the water discharge and double flush.
Extra-thin shell of the tank helps to save a lot of space and fit for any walls.
Do not need to prepare any other spare parts
Easy maintenance and servicing
saving
-3-
1263048-T01-D

RECOMMENDES TOOLS AND MATERIALSRECOMMENDES TOOLS AND MATERIALS
!
!
!
!
!
!
!
!
!
!
!
!
!
Open end/adjustable wrenches
Allen wrench
Knife
File
Hacksaw
Masonry
Level
Screw driver
Insulation tape
Tape measure
Seal tape
Bushing
Lubricant
!
!
!
!
!
!
!
!
!
!
!
!
!
/
-4-
ROUGHING-IN
UNIT: mm
Reference Value
K-4179T/K-4179T-VLS/K-4179T-DNSW
K-4179T-DNW/K-4179T-VABW/K-4179T-RES
K-4178T/K-4178T-VES2/K-4178T-VE2/K-4178T-ESS
478 3
88 2
438 3
681 4
269 5
35 2
100 3
205 3
1048 4
1066 4
1098 4
Finished
floor
90~142 18~62
45~95
90 0.5
230 3
180 3
52~230
Height Suggested/ 1150
K-10611T/K-10611T-RES
K-10611T-ESS/K-10611T-VLS/K-10611T-VLSL
478 3
88 2
440 3
333 2
Finished floor
722~792
(235~305)
604~674
60 1
Height to floor is decided by bowl
18~62
1263048-T01-D

K-4177T
K-75890T
K-8857T
K-75891T K-77271T
K-20341T
215 1
225 1
150 1
160 1
150 1
160 1
160 1
160 1
215 1
225 1
225 1
225 1
Kohler reserves the right to change marked dimensions without prior notice.
-5-
Floor Discharge Installation Method
Three discharge pipe installation methods based on actual
situation: A, B, C, adjust position by screw driver. Snap
discharge pipe lower end into discharge port.
ABC
B
C
A
Discharge
Elbow
Discharge
Elbow
Discharge
Elbow
Water Tank
Bracket
Water Tank
Bracket
Water Tank
Bracket
Drain outlet 90mm, welding
90mm
Drain outlet 110mm
110mm
Drain outlet 110mm, welding
110mm
1263048-T01-D

-6-
INSTALLATION
Way of Installation
There are two ways to install this product: in-wall tank with
frame & in-wall tank without frame
()
()
In-wall Tank Without Frame
()
In-wall Tank With Frame
()
Installation For In-wall Tank With Frame
A. Installation of In-wall Tank
()
A.
1. Remove in-wall tank from packing box. Remove paper
board inside water tank first as shown. Then remove board
and plug above bracket assembly.
1.
Plug Paper Board Board
2. Loose hex-head screw and adjust mounting bracket height
as shown in Fig A.
Loose hex-head screw and adjust supporting feet height as
shown in Fig B.
mounting bracket and supporting feet shall be adjusted
per customer ideal height. Use leveler to ensure the balance
of steel bracket.
Note:
2. A
B
Screw
Screw
Hex-head
Wrench
Medium
Allen Key
Adjustable
Bracket
Mounting
Bracket
A
B
1263048-T01-D

-7-
3. Drill four holes with diameter of 10mm and depth of 80mm
with churn drilling as shown.
A. Fill the bulge nail into the instruction hole on the wall, fix
the fixing frame to the bulge nail, adjust the gasket and
tighten the nut.
B. Fill the bulge nail into the instruction hole, fix the
adjustable bracket to the bulge nail, adjust the gasket
and tighten the nut.
3. A B 10mm 80mm
A.
B.
Adjustable Bracket
Mounting
Bracket
A
B
Bulge Screw
Bulge Screw
Gasket
Gasket
Nut
Nut
4. Tighten the nut with the wrench as shown in illustration A.
Tighten the nut with the wrench as shown in illustration B.
4. A
B
A
B
Nut
Nut
Wrench
Wrench
B. Floor Discharge Installation Method
B.
1. Three discharge pipe installation methods based on actual
situation: A, B, C, adjust position by screw driver. Snap
discharge pipe lower end into discharge port.
1. ABC
B
C
A
Discharge
Elbow
Discharge
Elbow
Discharge
Elbow
Water Tank
Bracket
Water Tank
Bracket
Water Tank
Bracket
Drain outlet 90mm, welding
90mm
Drain outlet 110mm
110mm
Drain outlet 110mm, welding
110mm
1263048-T01-D

-8-
2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2.
Inlet Hole
Drainage Hole
Big Cap
Tank Bracket
Small Cap
Long Screw
3. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
Water Pipe
Connecting Pipe
Mask
Screw
Water Tank
Protective Cover
4. Install rectangle cover
1) Install the rectangular shield in the block screen of the
tank, and tighten the screw to fix mask to the tank.
4.
1)
C. Installation of P-trap
C.
1. Insert drainage pipe with inner diameter 110mm into
drain elbow and weld.
1. 110mm
Water Tank Bracket
Drainage Pipe
1263048-T01-D

-9-
2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2. Long Screw
Inlet Hole
Drainage Hole
Big Cap
Tank Bracket
Small Cap
3.
3. When finishing the brickwork of the wall, take out the big
and small caps, and eliminate unwanted mask with a sharp
knife.
When building the wall, the product cannot be cast
and filled by cement or be squeezed.
Note:
Big Cap
Small Cap
D. Installation of Toilet
D.
1. Install the inlet pipe to the lavatory as shown, and mark on
the pipes at the back side of the tank with a ruler and a
pencil, and reserve appropriate space according to the
distance from the back of the tank to the inlet hole on the
wall.
1.
Inlet Pipe
Drainage Pipe
Mask
2.
Inlet Pipe
Reserved Space
Drainage Pipe
2. Eliminate unwanted part of the inlet pipe according to the
marks of reserved space ,and rasp a smooth surface with
files.
1263048-T01-D

-10-
3. Install the big and small leak-proof gaskets on inlet pipe
and outlet pipe ,then install it to corresponding pipes on the
toilet tank.
3.
4. 48mm-58mm of the long screw shall be reserved outside
the wall as shown in the illustration. if the long screw
outside the wall is not long enough or much longer than
that needed, it should be adjusted with screwdriver or by
hand. Then apply lubricant to drainage pipe and limber
pipe to ensure a smooth installation.
4. 48mm-58mm 48mm-58mm
Long Screw
Lubricant
Small Leak-proof Gasket
Inlet Pipe
Drainage Pipe
Big Leak-proof Gasket
5. Install the toilet as shown in the illustration, and use a spirit
level to ensure the lavatory to remain level.
5.
Spirit Level
Gasket
Long Screw
Reversed Lock
Hexagonal Nut
Decoration Cap
6. Install the reserved lock, gasket, hexagonal nut and
decoration cap onto long screw according to the order
shown in the illustration.
Please refer to the installation instructions of toilet.Note:
6.
1263048-T01-D

-11-
1. Push slot A and slot B of the break water board forward
and then insert into the detent.
When installing the break water board, please make
sure the slot is align with the detent.
After the break water board is installed, please make
sure hinge ears are on the bottom.
Tip 1:
Tip 2:
1. A B
1
2
Mask
Break Water Board
Slot A
A
Slot B
B
Hinge Ear
Detent
E. Faceplate Installation
E.
2. When tighten four locknuts on supporting board, adjust to
"OPEN" mark as shown.
2. OPEN
Supporting Board
Locknut
Fixing Lock
Supporting Board
Locknut
3. Tighten four screws to "LOCK" mark after nstalling
supporting board as shown.
3. LOCK
4. Tighten the long screws to the bolt through the hole.
the long screw should be vertical to the wall.Note:
4.
Bracket
Screw Long Screw
1263048-T01-D

-12-
5. Install the faceplate as shown in the illustration. Put the
lock on the faceplate directly on the reversed lock on
supporting board, then push the faceplate and lock it. The
installation shall begin from bottom to top.
5.
Faceplate
Faceplate
Supporting
Board
Lock
6. It is ready to use when connected to water supply after
installation.
6. Half Flush Button
Full Flush
Button
Installation For In-wall Tank Without Frame
A. Installation of In-wall Tank
A.
1. Remove in-wall tank from packing box. Remove paper
board inside water tank first as shown. Then remove board
and plug above bracket assembly.
1.
Plug Paper Board Board
1263048-T01-D

-13-
2. Make sure of h according to dimensions of bowl and then
locate the installation hole of fixing bracket. Mark on the
wall for appropriate position for fixing bracket, and drill four
holes with diameter of 10mm and depth of 80mm with
churn drilling as shown in illustration, and fill in the holes
with bulge screw and tighten the screw to set the fixing
bracket.
Note: Ensure the fixing bracket to remain level.
2. h
10mm 80mm
O
Fixing Bracket
Bulge Screw
Gasket
Spring
Nut
h
3. Put the tank onto the fixing bracket as shown in the right
figure and adjust the tank to level . Then tighten screws
with hex-head key. Note: it is a must to keep the tank level.
Connect the inlet hose with tank inlet pipe.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
Water Pipe
Screw
Level
Tank
Tighten
Loosen
Medium
Allen Key
Connecting Pipe
Mask
Screw
Water Tank
Protective Cover
4. Install the mask in the block screen of the tank, and
tighten the screw to fix the mask to the tank.
4.
5. Insert the inlet pipe and drainage pipe into the bowl, and
then adjust the syphon and drainage pipe to a proper
position to be fixed into the bowl. Make sure of the
positions of syphon and discharge elbow and then remove
the bowl.
5. Inlet Pipe
Syphon
Discharge Elbow Drainage Pipe
1263048-T01-D

-14-
7. Fix faceplate according to step E and then it is ready for
use.
7. E Half Flush Button
Full Flush Button
Finished Installation Illustration
Sharp Knife
Mask
6. When finishing the brickwork, eliminate unwanted part of
the mask, the drainage pipe and the inlet pipe.
When building the wall, the product cannot be cast
and filled by cement or be squeezed.
Note:
6.
Inlet Pipe
Drainage Pipe
REMOVE AND MAINTENANCE OF THE OUTLET VALVEREMOVE AND MAINTENANCE OF THE OUTLET VALVE
1.
1. Hold the faceplate with both hands and push upward to
take down the faceplate.
Faceplate
Faceplate
1263048-T01-D