KOIOS VS2233 User manual

FRESH
KEEP
INSTRUCTION
MANUAL

1-855-558-8777
[email protected]
www.mykoios.com
1 CONTACT US
Please send ‘VS2233’ to us by scanning the below QR-code.
(Instant reply):
SCAN ME
or visit: m.me/MyKoios

INTRODUCTION 2
INTRODUCTION
Package Contents
Warranty Customer Support
Thank you for purchasing our KOIOS VS2233 vacuum
sealer. This appliance is designed to meet ETL standard
for 120v. 60 Hz 110w appliances. Please read the user
manual carefully and keep it in a safe place for future
reference. Please contact us by email at
[email protected] if you need any assistance.
1. Vacuum sealer
2. Warranty Card
3. User Manual
4. Tube
5. Vacuum sealer bags
6. CReva
For questions, assistance, support. or warranty claims,
please contact us at the address below that corresponds
with your region. Please include your Amazon order
number and product model number.
Amazon orders: [email protected]
Please note: mykoios.com can only provide aπer-sales
service for products purchased directly from mykoios.com.
If you have purchased from a different seller. please
contact them directly for service or warranty issues.

3 PRODUCT SPECIFICATIONS
1. cover Lock: On the left and right side of the one-key
press cover.
2. Indicator Lamp: Indicates the status of vacuum or
sealing process.
3. Sealing Strip: Contains a heating wire covered with
Teflon which allows the bag to seal but not stick to the
strip.
4. Sealing Gasket: Press the bag onto the sealing gasket.
5. Vacuum Surface: Draws air out of bag and stops liquid
overflowing.
6. Airtight Seal: Prevents leakage during the vacuum
process.
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS

FUNCTION BUTTONS INTRODUCTION 4
1. Vacuum/Seal (on/off)
Draws air out of the bag and automatically seals the
bag after vacuuming is complete.
2.Seal only （on/off)
Seals bags without vacuuming or halts the sealing
action whenever you want to stop the operation.
3. Food
Dry button: For dry bags and items without moisture;
has a shorter heat-sealing time.
Moist button: For wet bags or foods with a little
moisture; has a longer heat-sealing time.
Note: The default setting is set for dry bags and shorter
heat-sealing time.
FUNCTION BUTTONS INTRODUCTION

PRODUCT DIAGRAM
5 PRODUCT DIAGRAM
Vacuum
Surface
Sealing gasket
Airtight seal
Airtight seal
Sealing strip
Seal Only (on/off)
Indicator Lamp (for seal)
lndicatpr Lamp (for dry and moist)
lndicator Lamp (for vacuum)
Vacuum sealing (on/off)
Food

HOW TO CUT ASUITABLE BAG 6
1. Take out the cutter
from the sealer.
2. With one hand, hold
onto the bag.With your
otherhand, slide the
cutting knife to cut the
bag.Folding the bag
and cutting it along the
crease makes it easier
to cut.
3. Use the sealer to seal
one end of the bag.
HOW TO CUT ASUITABLE BAG

1. After putting the food
that you want to
preserve into the bag,
put the opening end of
the bag on the top of
the black rubber strip,
and then close the
cover
2. Press the cover down
heavily on both sides
by the lined area using
two hands - until two
click sounds are
heard.
3. Press the vacuum/seal
button and the bag will
automatically vacuum
and seal. The sealer
will automatically turn
off when sealing is
complete.
4. Press the two cover
lock buttons to retrieve
the vacuum-sealed
bag.
7 HOW VACUUM-SEAL FOODSTUFF
HOW VACUUM-SEAL FOODSTUFF
Silver / Black / Universal

HOW TO USE PUMPING HOSE 8
Step 1: Wipe the vacuum sealed storage container, making
sure it is clean and dry. Ensure that once the items are
placed in the container, it is not too full and that there is
a certain space within the vacuum cover. Connect the
two ends of the suction hose to the top center hole of
the vacuum cover and the machine suction hole.
Step 2: Make sure the lid is tightly closed and turn the lid's
pointer knob to the "seal" direction before vacuuming.
Step 3: Press the "Vacuum" button to start pumping. When the
machine sound stops and the "seal" indicator goes out,
the vacuum is complete.
Step 4: Remove the suction hose after the vacuum is completed
and store it for next use.
NOTE: Before using the hose, please ensure that the container
used is suitable for vacuum sealing.
HOW TO USE PUMPING HOSE

1. Prepare the moist items to be vacuum
sealed.
2. Select 'Moist' mode, then press the
vacuum and seal button.
3. Wait for about 10 seconds to allow the
heating wire to cool down.
4. Press the "Seal Only" button to
complete the sealing.
NOTE
A small amount of gas may remain in the bag because of water
vaporization when sealing moist items.
9 PROCEDURE FOR SEALING MOIST ITEMS
PROCEDURE FOR SEALING MOIST ITEMS