Kokoon nightbuds User manual

1. MyKokoon app
2. Charging
3. Powering on and Pairing*
Connecting for the first time
Connect the headphones to a
power source, using the USB-C
cable.
To turn the headphones on and
enter pairing mode, hold the
buon until the LED flashes blue.
Turn on Bluetooth® on your
phone. Select “Kokoon Nightbuds”
in your Bluetooth® seings.
*Before powering on and pairing, the device must be o.
*Pairing only required for first connection.
Install and open the MyKokoon app.
LED
USB-C
LED
LED indicator
Flashing Single pulse
Action summary
For further information go to:
help.kokoon.io
For further information go to:
help.kokoon.io
Incoming call or in a call
Press for 1 secReject call / End call
Single click
Answer call
Using app or media
Single click
Play / Pause
Double click
Skip forward
Double click
Skip backward
Volume down Single click
Press for ~2 sec
On / O
Press for ~5 sec
On + Pairing
Single click
Volume up
General
Connect to power sourceCharging status
Disconnect from power source
Single click , when charging
Important care information
White
Green
Blue
Powering o
Charging
Pairing mode
(ready to pair with
a new device)
Powering on
Fully charged
Connected
To maintain good sound quality, clean
the acoustic nozzle regularly using an
alcohol-based cleaner on a coon bud.
Clean the silicone sleeves with soapy
water, rinse and dry thoroughly before
re-assembly.

nightbuds
Experience sleep like never before
kokoon.io
Your place to pause
Quick start guide
For further information go to:
help.kokoon.io