komodo UTVHB User manual

Owner's Manual Owner's Manual
Congratulations on your purchase of Komodo UTV Hitch Bumper. We build the hitch to be durable for years
of trouble free use. We provide you the innovative design feature which allows you to be able to easily attach
a bumper to your UTV without having to permanently attach it. Another advantage of this product allows for
adjustment to the bumper height and provides a Hitch ball. With proper installation and maintenance the
hitch bumper will be a reliable tool providing greater use and will increase the value of your UTV
#UTVHB
UTV
HITCHBUMPER
UTV
HITCHBUMPER

Read, study, and follow all instructions before attempting to use these devices. Failure to
follow instruction or head warnings may result in personal and/or property damage.
Do not attach Hitch Bumper where it will interfere with safe operation of UTV.
Make sure bolts are tight before use and periodically check for tightness as vibration may
cause nut to loosen over time and can cause damage to hitch or personal injury to rider.
Always check to make sure cotter pin and hitch pin are in good shape, if not replace.
Be aware of ground clearance when using hitch as steep hills may reduce clearance.
Always check to make sure all connections at hitch are correct.
Do not exceed manufactures rating for towing with UTV.
Do not exceed safe speeds when towing any accessory; refer to accessory manual or
limitations.
Due to towing load, the steering may be affected, use caution when towing heavy loads.
Be aware of engine temperature as towing may put extra load on UTV engine and cause it
to heat up; give the engine periodic breaks to avoid overheating.
Use caution when engaging or disengaging towing accessory; as some can be heavy and
may require two people for safety reasons.
Make sure towing accessory is properly aligned with hitch and do not use if the hitch is out
of alignment.
WARNINGS WARNINGS
1
PartsList/Diagram PartsList/Diagram
No. Qty. Description
Bumper Tube
Extender Tube
Drawbar
1
2
3
1
1
1
5/8"x3¼" Bolt & Locknut
3/8"x2½" Bolt & Locknut
1
4
4
5

AssemblyInstructions(Removable) AssemblyInstructions(Removable)
2
Using the included Bolt and washer (4) insert through the Drawbar (3)
attaching hitch to UTV receiver. Next use one each Bolt and Nut (5) attach
through the center hole on the drawbar (3) and the bottom hole on the
Extender tube (2). Do not tighten bolts yet.
UseofChock UseofChock
Once Hitch Bumper is installed properly, the rear of the UTV has some protection and you
can tow safely. Check towing accessory making sure to use all safety fastening methods, ex.
chains. The Bumper can be reconfigured to different angles and extended by simply
removing the Bolt and Nut; then reinserting into position and tightening. This is handy when
towing as it can be used to prohibit load shift or as a step to allow easy access to bed.
1.
Next insert the Bumper (1) by sliding into Extender tube (2). At this
point, the bumper needs to be decided upon its location. First rotate
the bumper into position and insert a Bolt and Nut (5) into hole
closest to angled position.
2.
Next, extend Bumper (1) up to level making sure
tailgate and other components do not interfere, and
insert a Bolt and Nut (5) into hole on extender. Once
satisfied with the position tighten all fasteners.
3.
Bumper can be adjusted to keep load from shifting
in trailer or to use as step to get in and out of bed.

3
KOMODO., (“Distributor”) warrants its UTV HITCH BUMPER products (the “Products”) as follows:
1. Limited Warranty.
Distributor warrants to original purchaser, providing Proof of Purchase, that the Products sold hereunder will be free
from defects in material and workmanship for a period of one year from date of purchase. If the products do not
conform to this Limited Warranty during the warranty period (as herein specified), Buyer shall notify Distributor, in
writing, within the warranty period, and the defects are of such type and nature as to be covered by this warranty,
Distributor shall, at its own expense, furnish replacement products or, at Distributor's option, replacement parts for the
defective products. Shipping and installation of the replacement Products or replacement parts shall be at Buyer's
expense.
2. Other Limits.
THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Distributor does not warrant against damages or defects arising out of improper or abnormal use or
handling of the Products; against defects or damages arising from improper installation, against defects in products or
components. Distributor passes on to Buyer the warranty received (if any) from the maker thereof of such
Manufacturer made products or components. This warranty also does not apply to Products upon which repairs have
been affected or attempted by persons other than pursuant to written authorization by Distributor. Fasteners are not
covered in this warranty.
3. Exclusive Obligation.
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Distributor shall be to repair or replace the
defective Products in the manner and for the period provided above. Distributor shall not have any other obligation
with respect to the Products or any part thereof, whether based on contract, tort, strict liability, or otherwise. Under no
circumstances, whether based on this Limited Warranty or otherwise, shall Distributor be liable for incidental, special,
or consequential damages.
4. Other Statements.
Distributor's employees or representatives' ORAL OR OTHER WRITTEN STATEMENTS DO NOT CONSTITUTE
WARRANTIES, and shall not be relied upon by Buyer, and are not a part of the contract for sale or this Limited
Warranty.
5. Entire Obligation.
This Limited Warranty states the entire obligation of Distributor with respect to the Products. If any part of this Limited
Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.
Komodo UTV Hitch Bumper Limited Warranty
REV. UTVHB.051909
Notes
Item #
Purchase Date:
Retailer's Name:
UTVHB
KOMODOATVAccessories
1311 John Reed Ct
City of Industry, CA 91745 USA
1(800)333-8889
For parts or warranty issues contact:
Please register your product at www.komodoatvacc.com