Konica Minolta bizhub 364e User manual

Konica Minolta bizhub 364e/284e/224e
Specification & Installation Guide
1
bizhub 364e/284e/224e Specifications
Type Monochrome Printer/Copier/Scanner
Document holder Stationary (mirror scanning)
Photoconductor OPC
Luminous source LED light-source illumination
Copying system Laser electrostatic copy method
Developing system Dry-2 component developing method
Fusing system Belt Fusing
Resolution Scanning: 600x600 dpi
Printing: 1200 x 1200 dpi
Document holder Types: Sheets, books (2-page spreads),
three-dimensional objects
Size: Maximum 11"x17"
Weight: 4.4 lb.
Paper Thin Paper (14 lb. to 15.5 lb.)*
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb.)
Thick Paper 1+ (32.25 lb. to 41.75 lb.)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
Thick Paper 4 (68.25 lb. to 79.75 lb.)**
Recycled Paper (16 lb. to 24 lb.)
Special Paper (16 lb. to 24 lb.)
Letterhead (16 lb. to 24 lb.)
Color Paper (16 lb. to 24 lb.)
1-Sided Special Paper (16 lb.to 24 lb.)
Banner Paper** (34 lb. to 55.5 lb.)
OHP Transparencies**, envelopes**,
label sheets**, tabs**, postcards**
*Cannot be fed through the bypass tray.
**Can only be fed through the bypass tray.
Copy sizes 1st Tray:
11"x17" to 8.5"x11", 5.5"x8.5", 8"x13"*
2nd Tray:
12.25"x18" to 8.5"x11", 5.5"x8.5", 8"x13"*
Bypass Tray:
12"x18" to 5.5"x8.5", 12.25"x18", 4"x6",
8"x13"*, Banner Paper
*There are six Foolscap sizes: 220x330mm(L),
8.5"x13.5", 8.5"x13" (L), 8.25"x13 (L),
8.12"x13.25" (L) and 8"x13" (L). Any one of these
sizes can be selected. For details, please consult with
your authorized Konica Minolta Service representative.
Paper tray
capacity
1st Tray and 2nd Tray:
Thin Paper/Plain Paper/Recycled Paper/
Special Paper/Letterhead/Color Paper/
1-Sided Special Paper: 500 sheets;
Thick Paper 1/1+/2/3: 150 sheets
Paper tray
capacity (cont.)
Bypass Tray:
Plain Paper/Recycled Paper/Special Paper/
Letterhead/Color Paper/1-Sided Special
Paper: 150 sheets; Thick Paper 1/1+/2/3/4/
OHP Transparencies/Postcards/Tabs:20
sheets; Envelopes:10; BannerPaper/Label
Sheets: 10 sheets
Copy exit tray
capacity
Thin Paper: 100 sheets
Plain Paper: 250 sheets
Thick Paper: 10 sheets
Overhead Projection
Transparencies*: 1 sheet
*Can only be fed through the bypass tray.
Warm-up time Less than 20 seconds
(at room temperature/73.4° F)
Image loss width Leading Edge: 0.165"
Trailing Edge: 0.118"
Rear Edge: 0.118"
Front Edge: 0.118"
Thin Paper: 0.197"
First copy 364e: 5.3 sec. or less
284e: 5.9 sec or less
224e: 6.9 sec or less
Print speed*:
(Simplex/Duplex)
bizhub 364e:
Plain paper: 36 sheets/min.
Thick 1/Thick1+/Thick 2/Thick 3/Thick 4:
18 sheets/min.
bizhub 284e:
Plain paper: 28 sheets/min.
Thick 1/Thick 1+/Thick 2/Thick 3/Thick 4:
14 sheets/min.
bizhub 224e:
Plain paper: 22 sheets/min.
Thick 1/Thick1+/Thick 2/Thick 3/Thick 4:
14 sheets/min.
Print speed (ppm)*: Single Sided/Plain Paper:
Size 364e 284e 224e
11"x17" 18 14 14
8.5"x14" 20 16 16
8.5"x11"P36 28 22
8.5"x11"L26 20 20
5.5"x8.5"L36 28 22
8"x13"L20 16 16
*Using 1st Tray
Print speed (ppm)*:
continued
Double Sided/Plain Paper:
Size 364e 284e 224e
11"x17" 18 14 14
8.5"x14" 20 16 16
8.5"x11"P36 28 22
8.5"x11"L25 20 20
5.5"x8.5"L36 28 22
8"x13"L20 16 16
*Using 1st Tray
Magnification
ratios
1.0 (full size: 1.00+_0.5% or less)
Enlarge: 121.4%, 129.4%, 154.5%, 200%
Reduce: 78.5%, 73.3%, 64.7%, 50.0%
Minimal: 93%
Stored Zoom Ratios: 3
"Minimal" zoom ratio (90% to 99.9%)
continued
10/25/2013

2
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
bizhub 364e/284e/224e Specifications continued
Multiple copies 1 to 9,999 sheets
Density control Copy Density: Manual Density Adjustment
(9 Levels); Background Density: Automatic
and Manual Density Adjustments (9 levels)
Power
requirements
120V, 12 A, 60 Hz
Power
consumption
1.5 kW or less
TEC Value 364e: 2.12 kWh
284e: 1.65 kWh
224e: 1.25 kWh
Dimensions
(with control
panel and
document feeder)
24.2" (W)x27" (D) x36.3" (H)
Space requirements* 36.9" (W)x47.8" (D) x 51.3" (H)
Memory/Hard Disk 2 GB/250 GB HDD (std)
Weight Approx. 168.7 lb.
* The indicated space requirements represent the space required to pull out
thepaper tray and the tray extension of the bypass tray and with the ADF open.
Duty Cycle
Up to 364e: 150,000, 284e: 120,000, 224e: 100,000.
Maximum monthly copy/print volume supported under
standard vendor supplied service. Defines the upper
end of the expected customer volume for the device.
Customers should consider multiple machines if average
monthly volume approaches duty cycle on continual basis.
Environmental Requirements
Temperature 50° F to 86° F
Humidity 15% to 85%
Noise during operation 364e: 71.6 dB
284e: 68.8 dB
224e: 66.7 dB
Noise during feeder operation
(FS-534/FS-533)
364e: 69.2 dB or less
284e: 68.0 dB or less
224e: 67.6 dB or less
Noise during standby 40.5 dB or less
Ozone emission 1.5 mg/h
Electrical Requirements
Line Options Dedicated NEMA Diagram for 5-15R
Voltage: 120 V AC
Amperage 12 A
Cycles 60 Hz
NEMA Part No: 5-15R
Cord Length 6.6 ft.
Note: The main electrical outlet must be located within 6.6 feet from the right rear
corner of the bizhub 364e/284e/224e main unit.

3
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
bizhub 364e/284e/224e + DF-624 + PC-210 + FS-534 + SD-511
62.88" (1597)
26.00" (660) 36.88" (937)
Unit: inch (mm
)
48.81" (1240)
61.00" (1550)
35.69" (906)
15.69"
(398)
16.88"
(428) 31.94" (812)
9.69"
(246)
bizhub 364e/284e/224e + DF-624 + PC-210 + FS-533
6.69"
(170)
43.56" (1107)
Unit: inch (mm
)
bizhub 364e/284e/224e + DF-624 + PC-210 + JS-506 + MK-730
34.13" (867)
11.63"
(295)
45.75" (1162)
Unit: inch (mm)
NOTICE: Be sure to allow a clearance of 8 inches (200 mm) or more at the back of this machine for the ventilation duct.
48.81" (1240)
16.88"
(428) 31.94" (812)
48.81" (1240)
16.88"
(428) 31.94" (812)
36.88" (937)
61.00" (1550)
35.69" (906)
15.69"
(398)
9.69"
(246)
61.00" (1550)
35.69" (906)
15.69"
(398)
9.69"
(246)
Space Requirements

4
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations
Automatic Duplex Unit (Standard)
Support Paper Type Thin Paper (14 lb. to 15.5 lb.)
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb.)
Thick Paper 1+ (32.25 to 41.75 lb.)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
Recycled Paper (16 lb. to 24 lb.)
Special Paper (16 lb. to 24 lb.)
Letterhead (16 lb. to 24 lb.)
Color Paper (16 lb. to 24 lb.)
Support Paper Size 12.25"x18" to 5.5"x8.5"; 4"x6"; SRA3; 8"x13"*;
Custom: (W) 3.9" to 12.625" x (L) 5.8" to18"
Power Requirements Supplied from main unit
*There are six Foolscap sizes: 220x330mm (L), 8.5"x13.5", 8.5"x13" (L), 8.25"x13 (L), 8.12"x13.25" (L) and 8"x13" (L).
Any one of these sizes can be selected. For details, please consult with your authorized Konica Minolta Service
representative.
OC-511 Original Cover
Type Original Cover/Platen Cover
DF-701 Dual Scanner Document Feeder
Type Single Pass Duplex Document Feeder
Support Paper Size 1-Sided/2-Sided Originals/Mixed Originals: 11" x 17"Lto 5.5" x 8.5"P
Support Paper Weight Single-Sided/Double-Sided: 9.25 lb. bond to 44 lb. bond
Mixed Original: 13.5 lb. bond to 34 lb. bond
1-Sided Thin Paper (9.25 lb. to 13.063 lb.)
1-Sided Plain Paper (13.25 lb. to 44 lb.)
2-Sided Plain Paper (13.25 lb. to 44 lb.)
Mixed Original Plain Paper (13.25 lb. to 34 lb.)
Paper Capacity Max. 100 sheets (21.25 Ib.)(Single-Sided/Double-Sided Originals)
Paper Transfer Speed 80 image/min (one-sided @ 300 dpi) (B&W/CoIor)
160 image/min (two-sided @ 300 dpi) (B&W/CoIor)
Power Requirements Supplied from main unit.
Max. Power Consumption 74.5 W or less
Dimensions WxDxH 24.1" x 19.8" x 5.6"
Weight Approximately 26.5 lb.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
5
Component Considerations
DF-624 Reversing Automatic Document Feeder
Type Reversing Automatic Document Feeder
Support Paper Size 1-Sided/2-Sided Originals/Mixed Originals: 11" x 17"Lto 5.5" x 8.5"P
Support Paper Weight Single-Sided/Double-Sided: 9.25 lb. bond to 34 lb. bond
Mixed Original: 13.5 lb. bond to 34 lb. bond
1-Sided Thin Paper (9.25 lb. to 13.063 lb.)
1-Sided Plain Paper (13.25 lb. to 34 lb.)
2-Sided Plain Paper (13.25 lb. to 34 lb.)
Mixed Original Plain Paper (13.25 lb. to 34 lb.)
Paper Capacity Max. 100 sheets (21.25 Ib.)(Single-Sided/Double-Sided Originals)
Paper Transfer Speed 80 image/min (one-sided @ 300 dpi) (B&W/CoIor)
37 image/min (two-sided @ 300 dpi) (B&W/CoIor)
Power Requirements Supplied from main unit.
Max. Power Consumption 60.0 W or less
Dimensions WxDxH 24.1" x 19.8" x 5.6"
Weight Approximately 19.75 lb.
AU-202H AU-204H
KP-101
AU-211P
AU-205H

6
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
FK-511 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used
for fax memory)
Number of Stored Pages 10,000 Pages (approx. 700 characters per page when 8.5" x 11"
document is stored using fine resolution)
Number of Fax Lines 1 Fax Line (Standard); Add second FK-511 Fax Kit for dual line
faxcapabilities.
Communication ECM/Super G3
Compatible Lines PSTN, PBX
Scanning Line Density Ultra Fine: 600 x 600 dpi
Super Fine: 16 dot/mm x 15.4 line/mm, 400 x 400 dpi
Fine: 8 dot/mm x 7.7 line/mm, 200 x 200 dpi
Normal: 8 dot/mm x 3.85 line/mm
Modem Speed 2.4 kbps-33.6 kbps
Compression MH/MR/MMR/JBIG
Scanning/(Sending) Original Glass: Max. 11"x17"
Paper Size ADF: 11" x 39" (Normal, Fine, Super Fine)
11" x 17" (Ultra Fine, Manual TX)
Recording Paper Size 11"x17" to 5.5"x8.5"
Transmission Speed Less than 3 sec. (V.34, 33.6 Kbps, JBIG)
Scan Speed 2 sec. (Letter/Fine Mode)
Number of Abbr. Dial 2000
Number of Program Dial 400
Number of Group Dial 100 (Up to 500 destinations per group)
Sequential Multiple Max. 600
Station Transmission
Transmitting Functions 2-in-1 TX, Mixed Original, F-Code Transmission, Frame Erase
Transmission, Sharpness, Header/Footer, Memory Transmission,
Quick Memory Transmission, Timer Transmission, Incomplete
Transmission Hold, Manual Transmission, Confidential Transmission,
Password Transmission, Polling Transmission, Bulletin Function,
Relay Transmission, Fax Forwarding Function, Overseas TX, V.34
OFF, ECM OFF
Receiving Functions Duplex Print (RX), Manual Reception, Confidential Reception, Memory
Reception, Polling Reception, Bulletin Function, Fax Forwarding (to
any destination stored in the Address Book), TSI Routing (to any
destination stored in the Address Book).
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
7
Component Considerations
FK-508 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used
for fax memory)
Number of Stored Pages 10,000 Pages (including all Scan/Box/Printer/Fax Documents)
Number of Fax Lines Add 1st FK-508 for 3rd Fax Line (Optional); Add 2nd FK-508 for
4thFax Line (Optional); Must add two FK-511 Fax Kits first forsingle
and dual line capabilities before you can add lines 3 and 4. FK-508
requires MK-728 Mount Kit (only one MK-728 Mount Kit required).
Communication ECM/Super G3
Compatible Lines PSTN, PBX
Scanning Line Density Ultra Fine: 600 x 600 dpi
Super Fine: 16 dot/mm x 15.4 lines/mm, 400 x 400 dpi
Fine: 8 dot/mm x 7.7 lines/mm, 200 x 200 dpi
Normal: 8 dot mm x 3.85 lines, 100 x 100 dpi
Modem Speed 2.4kbps-33.6kbps
Compression MH/MR/MMR/JBIG
Scanning (Sending) Original Glass: Max. 11" x 17"
Paper Size ADF: 11" x 39" (Standard, Fine, Super Fine)
11" x 17" (Standard, Fine, Super Fine)
Recording Paper Size 11" x 17"
Transmission Speed Less than 3 sec (V.34, JBIG)
Scan Speed 1 sec. (Letter/Fine Mode)
Number of Abbr. Dial 2,000
Number of Program Dial 400
Number of Group Dial 100 (Up to 500 destinations per group)
Sequential Multiple Max. 600
Station Transmission 605 (500 Abbreviated Dials + 100 Manual Dials + 5 Manual Email
Addresses)
Transmitting Functions Mixed Original, F-Code Transmission, Frame Erase Transmission,
Sharpness, Header/Footer, Memory Transmission, Quick Memory
Transmission, Timer Transmission, Incomplete Transmission
Hold, Manual Transmission, Confidential Transmission, Password
Transmission, Polling Transmission, Bulletin Transmission,
FaxForwarding Function, Overseas TX, V.34 OFF, ECM OFF
Receiving Functions Duplex Print (RX), Manual Reception, Confidential Reception,
MemoryReception, Polling RX, TSI Routing (to any destination
storedin the Address Book), Fax Forwarding
AU-202H AU-204H
KP-101
AU-211P
AU-205H

8
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
FS-534 Staple Finisher (50 sheets)
Type Staple Finisher
Output Trays Output Tray 1, Output Tray 2, Folding Output Tray (Top of RU unit)
Support Paper Type Output Tray 1 & Output Tray 2:
Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.), Thick Paper 1/1+/2/3 (24.25 lb. bond
to 79.75 lb. bond), OHP Transparencies, Postcards*, Envelopes*,
LabelSheets*, Letterhead*, Tabs*, Banner Paper*.
Staple Settings: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond
to 23.94 lb. bond), Recycled Paper (16 lb. to 24 lb.), ThickPaper1
(24.25 lb. bond to 32 lb. bond), Thick Paper 1+ (32.25 lb. to 41.75lb.),
Thick Paper 2 (42 lb. to 55.5 lb.)
* Fed into Output Tray 1
Support Paper Size Output Tray 1: 12.25"x18", 11"x17" to 5.5" x 8.5"L/P
Output Tray 2: Group/Sort: 12.25"x18", 11"x17", 5.5" to 8.5"L/P
Offset Group/Offset Sort: 12.25"x18", 11" x 17" to 5.5" to 8.5", SRA3
Width: 7.188" to 12.625"; Length 5.875" to 18"
Staple: 11"x17" to 7.25" x 10.5"L/P
Width: 7.188" to 11.688"; Length 5.875" to 17"
Folding Output Tray:
12.25" x 18", 11" x 17" to 5.5" x 8.5"L/P
Width: 3.5" to 12.5"; Length 5.5" to 18"
Mode Non-Sort, Sort, Group, Sort/Offset, Group/Offset, Sort and Staple
Stacking Capacity Output Tray 1: Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. to 24 lb.):
200 sheets. Thick Paper (24.25 to 79.75lb.), OHP Transparencies,
Postcards, Envelopes or Label Sheets, Letterheads, Tabs: 20 sheets
Output Tray 2 – Group/Sort Mode: Plain Paper (16 lb. to 24 lb.): 3,000
sheets of 8.5" x 11" or smaller, or 1,500 sheets of 8.5" x 14" orlarger;
or 500 sheets of 5.5" x 8.5" or smaller.
Thick Paper (24.25 to 79.75 lb.), OHP Transparencies, Postcards,
Envelopes, Labels, Letterheads, Tabs: 20 sheets
2nd Tray – Offset Group/Offset Sort:
3,000 sheets (8.5" x 11" or smaller); 1,500 sheets (8.5" x 14" orlarger);
500 sheets (5.5" x 8.5" or larger)
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (16 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.), OHP Transparencies, Postcard,
Envelope, Label sheets, Letterhead, Tabs: 20 sheets
Staple
Thin Paper (14 lb. to 15 lb.): 50 sheets
Plain Paper (16 lb. to 24 lb.): 50 sheets
Recycled Paper (16 lb. to 24 lb.): 50 sheets
Thick Paper (24.25 lb. to 32 lb.): 30 sheets
Thick Paper 1+ (32.25 lb. to 41.75 lb.): 30 sheets
Thick Paper 2 (42 lb. to 55.5 lb.): 20 sheets
2–9 Sheets: 100 Sets
10–20 Sheets: 50 Sets
21–30 Sheets: 30 Sets
31–40 Sheets: 25 Sets
41–50 Sheets: 20 Sets
Folding Output Tray: 100 sheets
Thin Paper (14 lb. to 15.5 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (16 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.): 20 sheets
Staple Mode Paper Sizes: 8.5" x 11" to 11" x 17"; Corner, 2 Position (Side, Top)
continued
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
9
Component Considerations
FS-534 Staple Finisher continued
Available Options PK-520 Punch Kit (2/3-hole Punch)
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 56 W
Dimensions (W x D x H) 20.81" x 25.25" x 40.25" (When tray is pulled out 25.88" (W))
Weight Approx. 88.188 lb.
Consumables SK-602 Staples (5,000 Staples x 3)
NOTE: FS-534 supports banner printing when installed on 364e/284e/224e.
FS-534 Staple Finisher +SD-511 Saddle Stitcher*A combination of FS-534 (see specs listed above) and SD-511 (specs listed below)
Applicable FS-534
Number of bins 1 Tray
Paper types Thin Paper (14 lb. to 15 lb.), Plain Paper (15 to 24 lb),
Thick Paper 1/1+/2 (24.25 to 55.5 lb.)*
*Can only be used as a cover page.
Paper sizes 12.25" x 18"L, 11" x 17", 8.5" x 14" L, 8.5" x 11",
Number of Center Stapled Plain Paper (15 to 24 lb.)
or Half-Folded Sheets 1–3 Sheets: 20 Sets
4–10 Sheets: 10 Sets
11–20 Sheets: 5 Sets
Number of 1 Sheet: 30 Sets
Tri-Folded Sheets
(Letter Only) 2–3 Sheets: 10 Sets
Staple mode Booklet, 2-point staple
Maximum staple sheet 20 sheets:(19 sheets/14 to 24lb.) + (1 sheet/13 to 55.5 lb.)
Dimensions (W x D x H) 8.25" x 21.875" x 21.563"
Weight 52.94 lb.
Consumables SK-602 (5,000 x 3 pkg/case)
Power requirements Supplied from finisher
*NOTE: The SD-511 Saddle Stitcher is not available as a separate accessory.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

10
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
FS-533 Inner Finisher (Staple Function only) (50 sheets)
Type Inner Staple Finisher
Output Trays Output Tray 1
Support Paper Types Group/Sort: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to
24lb. bond), Recycled Paper (16 lb. to 24 lb.), Thick Paper (24.25 lb.
bond to 79.75 lb. bond), OHP Transparencies, Postcards, Envelopes,
LabelSheets, Letterhead, Tabs, Banner Paper.
Offset Group, Offset Sort: Thin Paper (14 lb. to 15 lb.), Plain Paper (16lb.
bond to 24lb. bond), Recycled Paper (16 lb. to 24 lb.), Thick Paper
(24.25 lb. bond to 79.75 lb. bond)
Staple Settings: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to
23.94 lb. bond), Recycled Paper (16 lb. to 24 lb.), ThickPaper(24.25 lb.
bond to 55.25 lb. bond)
Mode Group, Sort, Offset Group, Offset Sort, Staple
Support Paper Size Group/Sort: 12.25"x18"L, 11"x17"Lto 5.5" x 8.5"L/P, 4" x 6"L,
SRA3L
Width: 3.56" to 12.625"; Length: 5.5" to 47.25"
Offset Group/Offset Sort: 12.25" x 18"L, 11" x 17"L, 8.5" x 11"L/P,
7.25" x 10.5"P
Width: 8.25" to 11.69"; Length: 7.17" x 17"
Staple: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 7.25" x 10.5"P
Width: 8.25" to 11.69"; Length: 7.17" x 17"
Stacking Capacity Group, Sort, Offset Group, Offset Sort: Thin Paper (14 lb. to 15 lb.),
PlainPaper (16 lb. bond to 24lb. bond), Recycled Paper (16 lb. to 24 lb.):
500 sheets of 8.5" x 11" or smaller; or250 sheets of 8.5" x 14" orlarger
Thick Paper (24.25 lb. bond to 79.75 lb. bond), OHP Transparencies,
Postcards, Envelopes, LabelSheets, Letterhead, Tabs, Banner Paper:
10 sheets
Staple: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.): 50 sheets of 8.5" x 11" or smaller;
or30sheets of 8.5" x 14" or larger
Thick Paper (24.25 lb. bond to 55.5 lb. bond): 2 sheets
Staple Mode Corner Front / Back 2-point
Available Options PK-519 Punch Kit (2-3-hole Punch)
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 40W
Dimensions (W x D x H) 18.6" x 23" x 7.7"
Weight Approx. 26.5 lb.
Consumables SK-602 Staples (5,000 Staples x 3)
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
11
Component Considerations
PK-519 Punch Kit (For FS-533)
Applicable Finisher FS-533
Number of holes 2 or 3 holes
Support Paper Weight Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. to 24 lb.),
Thick paper (24.25 lb. bond to 79.75 lb. bond)
Support Paper Size 2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Power Requirements Supplied from Finisher FS-533
Dimensions (WxDXH) 4.33" x 19.03" x 8"
Weight Approx. Approx. 7 lb.
PK-520 Punch Kit (For FS-534)
Applicable FS-534
Number of holes 2 or 3 holes
Support Paper Weight Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to 24 lb. bond),
Recycled Paper (16 lb. to 24 lb.),
Support Paper Size 2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Power Requirements Supplied from Finisher FS-534
Dimensions (W x D x H) 2.375"x 19.375" x 5.563"
Weight Approx. Approx. 3.938 lb.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

12
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
JS-506 Job Separator Tray
Output tray Output Tray 1, Output Tray 2
Mode Group, Sort, Offset Group*, Offset Sort*
* Fed into Output Tray2
Support Paper Types Group/Sort: Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to
24lb. bond), Recycled Paper (16 lb. to 24 lb.), Thick Paper (24.25 lb.
bond to 79.75 lb. bond), OHP Transparencies, Postcards*, Envelopes,
LabelSheets, Letterhead, Tabs*, Banner Paper*.
Offset Group, Offset Sort: Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16
lb. bond to 24lb. bond), Recycled Paper (16 lb. to 24 lb.), Thick Paper
(24.25 lb. bond to 79.75 lb. bond)
* Fed into Output Tray 2
Support Paper Size Output Tray 1: 12.25"x18"L, 11"x17"L to 5.5" x 8.5"L/P, SRA3L
Width: 3.56" to 12.625"; Length: 5.5" to 18"
Output Tray 2: Group/Sort: 12.25"x18"L, 11"x17"Lto 5.5" x 8.5"L/P,
4" x 6"L, SRA3L
Width: 3.56" to 12.625"; Length: 5.5" to 47.25"
Offset Group/Offset Sort: 11" x 17"L, to 7.25" x 10.5"L/P
Width: 7.17" to 12.25"; Length: 5.8" to 18"
Stacking Capacity Output Tray 1: Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond
to24lb. bond),
Recycled Paper (16 lb. to 24 lb.): 100 sheets
Output Tray 2: Group/Sort: Thin Paper (14 lb. to 15.5 lb.), Plain Paper
(16lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.): 150 sheets; Thick Paper (24.25lb.
bond to 79.75 lb. bond), Transparency, Postcard, Label sheets:
20Sheets; Envelope: 10 Sheets; Banner Paper: 1 Sheet
Offset Group/Offset Sort: Thin Paper (14 lb. to 15.5 lb.), Plain Paper
(16lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.): 150 sheets; Thick Paper (24.25 lb.
bond to 79.75 lb. bond): Not specified
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 24W
Dimensions (W x D x H) 19.4" x 18.5" x 8.9"
Weight Approx. 3.3 lb.
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
13
Component Considerations
PC-110 Paper Feed Cabinet
Type 1 x 500 sheet universal drawer + storage
Support Paper Types Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.), Single Side Only Paper (16 lb. bond
to 24lb. bond), Special Paper (16 lb. bond to 24lb. bond), Letterhead
(16 lb. bond to 24lb. bond), Colored Paper (16 lb. bond to 24lb. bond),
Thick Paper 1 (24.25 lb. bond to 32 lb. bond), Thick Paper 1+ (32.25 lb.
bond to 41.75 lb. bond), Thick Paper 2 (42 lb. bond to 55.5 lb. bond),
Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
Support Paper Size 11"x17" (L) to 8.5" x 11" (L/P), 5.5" x 8.5" (L), 8" x 13" (L)*
* There are six Foolscap sizes: 220x330mm, 8.5"x13.5", 8.5"x13", 8.25"x13, 8.12"x13.25"
and 8"x13". Only one of these sizes can be selected. For details, please consult with your
authorized Konica Minolta Service representative.
Paper Capacity Tray 3: Thin paper, Plain paper, Recycled paper, 1-sided special paper,
Special paper, Letterhead, Colored paper: 500 sheets, Thick 1, Thick
1+, Thick 2, Thick 3: 150 sheets
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 15W
Dimensions (W x D x H) 24.2" x 25.7" x 11.6"
Weight Approx. 48.5 lb.
PC-210 Paper Feed Cabinet
Type 2 x 500 sheet universal drawers
Support Paper Types Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.), Single Side Only Paper (16 lb. bond
to 24lb. bond), Special Paper (16 lb. bond to 24lb. bond), Letterhead
(16 lb. bond to 24lb. bond), Colored Paper (16 lb. bond to 24lb. bond),
Thick Paper 1 (24.25 lb. bond to 32 lb. bond), Thick Paper 1+ (32.25 lb.
bond to 41.75 lb. bond), Thick Paper 2 (42 lb. bond to 55.5 lb. bond),
Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
Support Paper Size 11"x17" (L) to 8.5" x 11" (L/P), 5.5" x 8.5" (L), 8" x 13" (L)*
*There are six Foolscap sizes: 220x330mm (L), 8.5"x13.5", 8.5"x13" (L), 8.25"x13 (L),
8.12"x13.25" (L) and 8"x13" (L). Any one of these sizes can be selected. For details,
please consult with your authorized Konica Minolta Service representative.
Paper Capacity Tray 3: Thin paper, Plain paper, Recycled paper, 1-sided special
paper, Special paper, Letterhead, Colored paper: 500 sheets, Thick 1,
Thick1+, Thick 2, Thick 3: 150 sheets
Tray 4: Thin paper, Plain paper, Recycled paper, 1-sided special
paper, Special paper, Letterhead, Colored paper: 500 sheets, Thick 1,
Thick1+, Thick 2, Thick 3: 150 sheets
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 15W
Dimensions (W x D x H) 24.2" x 25.7" x 11.6"
Weight Approx. 53 lb.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

14
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
PC-410 Paper Feed Cabinet
Type Large Capacity Cassette
Support Paper Types Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to 24lb. bond),
Recycled Paper (16 lb. to 24 lb.), Single Side Only Paper (16 lb. bond
to 24lb. bond), Special Paper (16 lb. bond to 24lb. bond), Letterhead
(16 lb. bond to 24lb. bond), Colored Paper (16 lb. bond to 24lb. bond),
Thick Paper 1 (24.25 lb. bond to 32 lb. bond), Thick Paper 1+ (32.25 lb.
bond to 41.75 lb. bond), Thick Paper 2 (42 lb. bond to 55.5 lb. bond),
Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
Support Paper Size 8.5" x 11"P
Paper Capacity Thin paper, Plain paper, Recycled paper, 1-sided special paper, Special
paper, Letterhead, Colored paper: 2500 sheets, Thick 1, Thick 1+,
Thick 2, Thick 3: 1000 sheets
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 45W
Dimensions (W x D x H) 24.2" x 25.7" x 11.6"
Weight Approx. 50.7 lb.
DK-510 Copy Desk
Type Storage drawer only
Function Stores printing materials such as paper or toner. Required when
additional paper drawers are not installed, to bring the device
tooperational height
Dimensions (WxDxH) 24.2" x 25.7" x 11.6"
Weight Approx. 46.3 lb.
KP-101 10-Key Pad
Type 10-Key Pad
Function Provides hard keys for entering numerical values and supports
Voice Guidance function available with optional LK-104 v3 i-Option
LicenseKit. Meets Section 508 Accessibility requirements.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
15
Component Considerations
AU-102 Biometric Authentication Unit
Biometric Sensor System Transmission-type optical system
Verification Time Approx. 1 sec. or less
Interface USB 2.0
Dimensions WxDxH Approx. 2.32" x 3.25" x 2.94"
Weight Approx. 3 oz. (excluding USB cable)
Max. Power Consumption DC 5 V, 500 mA
System Conditions Ambient temperature: 41º to 95º (F)
(during operation) Humidity: 20% to 80% (No dew condensation)
System Conditions Ambient temperature: 32º to 122º (F)
(during non-operation) Humidity: 20% to 80% (No dew condensation)
NOTE: WT-506 Working Table is required for AU-102 Biometric Authentication Unit.
AU-201H HID Proximity Card Reader
Dimensions (WxHxD) 3.625"x2.5"x0.625"
Weight 0.25 lb.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 32°to 104° F
(operating mode) Humidity: 20% to 85%
System Conditions Ambient Temperature: -4°to 122° F
(non-operating mode) Humidity: 20% to 85%
Radio Law Division Self-Guided Read-Write Communication Facility
Applicable Card ISO 14443 Type A, FeliCa-based non-contact IC Card
Acquired Standard VCCI Class B
Compatible Computer CPU: PC/T Compatible, 1 GHz or more
Memory: 128 MB or more
HDD: 100 MB or more free space
Monitor: 800x600 pixels, 16-bit color or more
Network: TCP/IP
Application: Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework (SP1) or later
NOTE: WT-506 Working Table or MK-735 Mount Kit (internal mount) is required for AU-201H HID Proximity
Card Authentication Unit.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

16
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
AU-202H HID iClass Card Reader
Dimensions (WxHxD) 4.0" x 1.9" x 0.09"
Weight 0.25 lb.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 31˚ to 150˚ F
(operating mode) Humidity: 5% to 95%
Transmit Frequency 13.56 MHz
Environmental IP55
Certifications UL294/cUL (US), FCC Certification (US), IC (Canada), RoHS
Card Type Compatibility All HID 2k, 16k or 32k iClass Cards
HID iClass Card 26-bit, HID Corporate 1000®
Format Compatibility
NOTE: WT-506 Working Table or MK-735 Mount Kit (internal mount) required for AU-202H HID iClass Card Reader.
AU-204H Magnetic Stripe Card Reader
Dimensions (WxHxD) 1.28" x 1.23" x 3.94"
Weight 4.5 oz.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 40˚ to 158˚ F
(operating mode) Humidity: 10% to 90%
Transmit Frequency 3-60 i.p.s.
Certifications ISO 7810 and ISO 7811/AAMVA
Card Type Compatibility All magnetic stripe cards
NOTE: WT-506 Working Table required for AU-204H Magnetic Stripe Card Reader.
AU-205H IC Card Reader*
Dimensions (WxHxD) 2.8" x 3.7" x 0.6"
Host Interface USB 2.0 (also compliant with USB 1.1)
Power Supply Supplied from USB Port
Card Protocols HID PROX, HID Indaia, EM Prox
Low Frequency (125 kHz)
Card Protocols CCID: MIFARE Classic™1K/4K, Ultra Light, Ultra Light C, Plus,
High Frequency (13.5 MHz) MIFARE DESFire™0.6, MIFARE DESFire™EV1, IC Card, iCLASS SE/
SR®
, MIFARE SE™ , DESFire EV1 SE, T=CL, ISO 14443 A with up
to848 kbps transmission rate (depending on card1), ISO 15693
withup to 26 kbps transmission rate (depending on card)
Keyboard Wedge: MIFARE™Classic 1K/4K, Ultra Light, Ultra Light
C, Plus (Security Lvl 1), MIFARE DESFire™0.6, MIFARE DESFire™
EV1 (MAC/DES/3DES/3K3DES/ AES), IC Card, iCLASS SE/SR®
,
MIFARESE™
, DESFire EV1 SE
*NOTE: May not be available at time of launch.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
17
Component Considerations
AU-211P CAC/PIV Solution w/Certificate
Dimensions (WxHxD) 2.75" x 2.75" x 0.39"
Weight 0.13 Ibs.
Power Supply Supplied from USB Port
System Conditions 0˚ to 122˚ F
(operating mode)
Interface Full Speed USB (12 Mbps)
Connector Shape USB A Type Connector
Compatible Card PKI-C-Card (PIV, CAC)
NOTE: WT-506 Working Table required. Please contact your local Government Account Manager for additional information.
Anticipated availability Winter 2014.
WT-506 Working Table
Type External Table
Function Holds AU-102 Biometric Authentication Unit, AU-201H HID Proximity
Card Reader1, AU-202H HID iClass Reader2, AU-204H Magnetic
Stripe Card Reader3or AU-211P CAC/PIV Solution4; Canbe used as
a place holder for originals and/or output.
Dimensions WxDxH 18.30" x 16.33" x 1.5"
1AU-201H HID Proximity Reader can be mounted on WT-506 (or internally with MK-735).
2AU-202H HID iClass Reader must be mounted on WT-506 (or internally with MK-735).
3AU-204H Magnetic Stripe Card Reader requires WT-506.
4AU-211P requires WT-506. Please contact your local Government Account Manager for additional information.
EK-606 USB Host/Local Interface
Type USB Interface and USB Cable
Function Required to connect optional External Keyboard (or can use EK-607
when Bluetooth printing is also required) or optional i-Option
LK-104v3 Voice Guidance License kit.
EK-607 USB Host/Local Interface with Bluetooth
Type USB Interface and USB Cable
Function Supports Bluetooth Printing. Required to connect optional
External Keyboard (or can use EK-606 if Bluetooth printing
is not required) or optional i-Option LK-104 v3 Voice Guidance
License kit.
MK-728 Mount Kit
Type Internal Component
Function Required if you wish to install the FK-508 Fax Kit(s) for Fax Line 3
andFax Line 4 support. Only one MK-728 Mount Kit required.
MK-735 Mount Kit
Type Internal Component
Function Required if you wish to install the AU-201H or AU-202H internally
inthe device.
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H
AU-202H AU-204H
KP-101
AU-211P
AU-205H

18
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Component Considerations continued
LK-101 v3 i-Option License Kit
Type License Key
Function Web Browser functions.
LK-102 v3 i-Option License Kit
Type License Key
Function Enhanced PDF Encryption (128-bit AES Encryption), PDF/A (1a/1b)
and Linearized PDF file support.
Note: The LK-110 supports the same functions as the LK-102 v3, therefore, bothlicense kits cannot be installed on the same device.
LK-104 v3 i-Option License Kit
Type License Key
Function Voice Guidance
LK-105 v3 i-Option License Kit
Type License key
Function Provides Searchable PDF function
Note: The LK-110 supports the same functions as the LK-105 v3, therefore, bothlicense kits cannot be installed on the same device.
LK-106 i-Option License Kit
Type License key
Function Supports Bar Code Font Printing
LK-107 i-Option License Kit
Type License key
Function Supports Unicode Font Printing
LK-108 i-Option License Kit
Type License key
Function Supports OCR Font Printing
LK-110 i-Option License Kit
Type License Key
Function OOXML format file conversion for docx/xlsx, Fax to searchable PDF,
convert box data to compact PDF, direct print e-mail attached file.
Combines LK-102 (Encrypted PDF) & LK-105 (Searchable PDF/OCR)
functionality.
Note: If you install the LK‑110 on a device, you cannot install the LK‑102 v3 and/or LK‑105 v3 on the same device.
LK-111 i-Option License Kit
Type License Key
Function Provides ThinPrint client support.

Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
19
Component Considerations
UK-204 i-Option Upgrade Kit
Type 2 GB Memory Upgrade (for i-Option License Kits)
Function Required for LK-101 v3 Web Browser, LK-102 v3 Enhanced PDF
Encryption, PDF/A, Linearized PDF, LK-104 v3 Voice Guidance,
LK-105Searchable PDF, LK-106 BarCode Font, LK-107 Unicode Font,
LK-108 OCR Font, LK-110 Enhanced ImageData and PageScope
MyPanel, (only one upgrade kit required per device).
SC-508 Copy Guard Kit
Type Embedded Type
Function Prevents printing of Copy Protected documents.
Please note that two SC-508 Copy Guard Kits are required when the 364e/284e/224e are equipped with the optional
DF-701 Dual Scan Document Feeder (one Copy Guard Kit required for each side scanned).

20
Konica Minolta bizhub364e/284e/224e
Specification & Installation Guide
Mixed Original Support Possible Not Possible
Maximum Document Width1
Document Size2
11"x17"
landscape
8.5"x11"
portrait
8.5"x14"
landscape
8.5"x11"
landscape
5.5"x8.5"
portrait
5.5"x8.5"
landscape
11"x17" (L)
8.5"x11" (P)
8.5"x14" (L)
8.5"x11" (L)
5.5"x8.5" (P)
5.5"x8.5" (L)
1Indicates the width of the widest document size of the mixed originals.
2Indicates the document sizes that can be mixed together based on the maximum document width.
Standard Paper Tray Support
Main Unit – bizhub 364e/284e/224e (Paper Tray 1 and 2)
Component Capacity Size Weight
Tray 1 500 sheets 11"x17" 14 lb. bond to 68 lb. bond
Tray 2 500 sheets 12"x18" 14 lb. bond to 68 lb. bond
Bypass 150 sheets 12"x18" 16 lb. bond to 79.75 lb. bond