Konica Minolta FAX 2900 User manual

i
Contents
1 Introduction ................................................................... 1
2 Making a basic operation ............................................. 1
3 Specifying the Zoom Ratio........................................... 3
4 Adjusting the Image Density........................................ 4
5 Making 2in1 Copies ...................................................... 6
6 Specifying Sorting ........................................................ 7
7 Basic Faxing.................................................................. 8
A4S quick guide.book Page i Wednesday, September 15, 2004 11:00 AM

ii
A4S quick guide.book Page ii Wednesday, September 15, 2004 11:00 AM

Introduction 1
1
1 Introduction
This manual provides information on the basic copy and fax operation.

Note
Please refer to CD manual for the details information and advanced function.
Store this manual and the enclosed CD-ROM in a safe location for future reference.
2 Making a basic operation
1Position the original.
2Make the other necessary
settings.
HZoom ( page 3)
HImage density (page 4)

Note
If you do not wish to specify the other
settings,continue with step 3.
Paper
Zoom
Auto/Photo
Chapter01.fm Page 1 Monday, September 20, 2004 11:56 AM

2Making a basic operation
2
3Using the 10-Key Pad, enter the
number of copies to be made. Any
number from 1 to 99 can be
entered.
4Press the [Start] key.
This will start the print cycle.
HTo stop the print cycle in mid-
operation, press the [Stop]
key.
HTo cancel the print job, press
the [No] key or the [Panel Reset] key.
HTo restart the print cycle, press the [Start] key.
A
HIJ
QPST
BCD
KLM
UVW
EFG
NOP
XYZ[
6
234
57
8
1
9
$
:
+
Chapter01.fm Page 2 Monday, September 20, 2004 11:56 AM

Specifying the Zoom Ratio 3
3
3 Specifying the Zoom Ratio
By specifying a zoom ratio, the copy can be enlarged or reduced.
Zoom Ratio Settings
Setting the Zoom Ratio
1Position the original.
2Press the [Zoom] key until the
desired fixed ratio is selected.
HTo specify a zoom ratio other
than a fixed ratio, press the
[ ] and [ ] keys until the
desired zoom ratio is specified.
Pressing these keys change the ratio in x 0.01 increments.
3Using the 10-Key Pad, enter the
number of copies to be made, and
then press the [Start] key.
Zoom Ratio Settings Description
Fixed ratios • The following optimum zoom ratios are available for making copies
from commonly used original sizes to standard paper sizes.
•×0.50
•×0.64 (LT →HL)
•×0.78 (LG →LT)
•×1.29 (HL →LT)
•×1.54 (HL →LG)
•×2.00
Ratios set using the Zoom [▼]
and [▲] keys
Pressing the [▼] or [▲] key increases or decreases the zoom ratio in
×0.01 increments.
The ratio can range from ×0.50 to ×2.00.
Full Size This setting makes a copy the same size as the original (×1.00).
Zoom
Chapter01.fm Page 3 Monday, September 20, 2004 11:56 AM

4Adjusting the Image Density
4
4 Adjusting the Image Density
The image density setting can be adjusted in two broad modes, “Text” and “Photo”.
Image Density Setting
GText mode:
The image density can be adjusted either automatically (Auto) or manually in
nine steps.
HThe image density is adjusted automatically according to the original from
which a copy is to be made.
HManual image density adjustment:
The image density can be adjusted to one of nine levels.
To reduce bleed-throughs when copying newspapers and magazines, press
the [ ] key to select a lighter setting. To reproduce faint colors in brighter
parts of the image, press the [ ] key to select a darker setting.
Selecting a darker setting could result in a background image being
reproduced on the copy, while selecting a lighter setting could make the copy
image itself too light. Select the appropriate level according to your original.
GPhoto mode:
Select “Photo” when making a copy from an original having large halftone
images, such as photos.
Setting the Image Density
1Position the original.
2Press the [Auto/Photo] key on the
control panel to select the desired
mode.

Note
In the Photo mode, the Auto
setting cannot be selected.
Auto/Photo
Chapter01.fm Page 4 Monday, September 20, 2004 11:56 AM

Adjusting the Image Density 4
5
3If you want to adjust the image density manually, press the [ ] and [ ] keys
to select the desired setting.
4Make the other necessary settings
HZoom ratio (page 3)
5Using the 10-Key Pad, enter the
number of copies to be made, and
then press the [Start] key.
Chapter01.fm Page 5 Monday, September 20, 2004 11:56 AM

5Making 2in1 Copies
6
5 Making 2in1 Copies

This function isavailable only with FAX3900
Two sheets of single-sided documents can be copied onto one double-sided sheet.
Specifying Settings for 2in1 Copies
1Position the original.
2Press the [2in1] key, and then
check that the indicator lights up.
3Make the other necessary settings.
HImage density ( page 4)
4Using the 10-Key Pad, enter the
number of copies to be made, and
then press the [Start] key.
2in1
Chapter01.fm Page 6 Monday, September 20, 2004 11:56 AM

Specifying Sorting 6
7
6 Specifying Sorting
1Position the originals.
2Press the [Sort] key, and then
check that the indicator lights up.

Note
If the Sort indicator is not lit, the Non-
Sort setting is selected.
3Make the other necessary settings.
HZoom Ratio (page 3)
HImage density (page 4 )
4Using the 10-Key Pad, enter the
number of print to be made, and
then press the [Start] key.
Sort
Chapter01.fm Page 7 Monday, September 20, 2004 11:56 AM