Kontron 2-DH47-0010 User manual

» User Guide «
CC300 Operator Panel
Model 2-DH47-0010
User Guide (Version 1.1)
P/N: XXXX-XXXX

1. Table of Contents CC300 Operator Panel – User Guide
Version 1.13

CC300 Operator Panel
- User Guide
Disclaimer
Kontron would like to point out that the information contained in this user guide may be subject to alteration,
particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee
on the part of Kontron with respect to technical processes described in the user guide or any product characteristics
set out in the user guide. Kontron assumes no responsibility or liability for the use of the described product(s),
conveys no license or title under any patent, copyright or mask work rights to these products and makes no
representations or warranties that these products are free from patent, copyright or mask work right infringement
unless otherwise specified. Applications that are described in this user guide are for illustration purposes only.
Kontron makes no representation or warranty that such application will be suitable for the specified use without
further testing or modification. Kontron expressly informs the user that this user guide only contains a general
description of processes and instructions which may not be applicable in every individual case. In cases of doubt,
please contact Kontron.
This user guide is protected by copyright. All rights are reserved by Kontron. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the
express written permission of Kontron. Kontron points out that the information contained in this user guide is
constantly being updated in line with the technical alterations and improvements made by Kontron to the products
and thus this user guide only reflects the technical status of the products by Kontron at the time of publishing.
Brand and product names are trademarks or registered trademarks of their respective owners.
©2020 by Kontron S&T AG
Kontron S&T AG
Lise-Meitner-Str. 3-5
86156 Augsburg
Germany
www.kontron.com

1. Table of Contents CC300 Operator Panel – User Guide
4Version 1.1
High Risk Applications Hazard Notice
THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE
OR RESALE FOR THE OPERATION OF NUCLEAR FACILITIES, THE NAVIGATION, CONTROL OR
COMMUNICATION SYSTEMS FOR AIRCRAFT OR OTHER TRANSPORTATION, AIR TRAFFIC CONTROL, LIFE
SUPPORT OR LIFE SUSTAINING APPLICATIONS, WEAPONS SYSTEMS, OR ANY OTHER APPLICATION IN A
HAZARDOUS ENVIRONMENT, OR REQUIRING FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF
PRODUCTS COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR
ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS").
You understand and agree that your use of Kontron devices as a component in High Risk Applications is
entirely at your risk. To minimize the risks associated with your products and applications, you should
provide adequate design and operating safeguards. You are solely responsible for compliance with all legal,
regulatory, safety, and security related requirements concerning your products. You are responsible to
ensure that your systems (and any Kontron hardware or software components incorporated in your
systems) meet all applicable requirements. Unless otherwise stated in the product documentation, the
Kontron device is not provided with error-tolerance capabilities and cannot therefore be deemed as being
engineered, manufactured or setup to be compliant for implementation or for resale as device in High Risk
Applications. All application and safety related information in this document (including application
descriptions, suggested safety measures, suggested Kontron products, and other materials) is provided for
reference only.
Intended Use: The CC300 Operator panel is designed for the use in industrial facilities only.
Handling and operation of the product is permitted only for trained personnel
within a work place that is access controlled. Please follow the “General Safety
Instructions for IT Equipment” supplied with the system.

1. Table of Contents CC300 Operator Panel – User Guide
Version 1.15
1. Table of Contents
1. Table of Contents ...............................................................................................................................5
1.1. Table of Figures........................................................................................................................................... 7
2. Introduction .......................................................................................................................................9
2.1. Symbols used in this User Guide............................................................................................................... 10
3. Important Instructions......................................................................................................................11
3.1. Note on the Warranty............................................................................................................................... 11
3.2. Exclusion of Accident Liability Obligation................................................................................................. 11
3.3. Liability Limitation / Exemption from the Warranty Obligation .............................................................. 11
4. General Safety Instructions for..........................................................................................................12
4.1. Electrostatic Discharge (ESD).................................................................................................................... 14
4.1.1. Grounding Methods........................................................................................................................... 14
4.2. Instructions for the Lithium Battery ......................................................................................................... 15
5. Electromagnetic Compatibility ..........................................................................................................16
5.1. Electromagnetic Compatibility (EU) ......................................................................................................... 16
5.2. FCC and RSS Statement (USA & Canada) .................................................................................................. 16
5.3. Nameplate of the CC300 Operator Panel................................................................................................. 17
6. Scope of Delivery..............................................................................................................................18
7. Product Description..........................................................................................................................19
7.1. Front Side View ......................................................................................................................................... 22
7.1.1. On/Off Button.................................................................................................................................... 23
7.1.2. RFID Read/Write Zone ....................................................................................................................... 23
7.1.3. Emergency Stop Switch ..................................................................................................................... 24
7.1.4. Buttons for Tilting the CC300 Operator Panel................................................................................... 25
7.1.5. Touch Display..................................................................................................................................... 25
7.1.6. Touch Display Care and Cleaning....................................................................................................... 25
7.1.7. Traversing Buttons............................................................................................................................. 26
7.1.8. Markings for the USB Ports ............................................................................................................... 26
7.1.9. Permissive Button and Program Interrupt Button ............................................................................ 27
7.1.10. Rotary/Push Button with Display .................................................................................................... 27
7.2. Rear View .................................................................................................................................................. 28
7.2.1. Harting Connector ............................................................................................................................. 29
7.2.2. Connection Cables for the Linear Actuator ....................................................................................... 29
7.2.3. Grounding Cable (PE)......................................................................................................................... 30
7.2.4. LAN Cables ......................................................................................................................................... 30
7.3. Left and Right Side View ........................................................................................................................... 31
7.3.1. USB Ports ........................................................................................................................................... 32
7.4. Top and Bottom View ............................................................................................................................... 33
7.5. Accessing internal Components................................................................................................................ 34

1. Table of Contents CC300 Operator Panel – User Guide
6Version 1.1
7.5.1. Opening the CC300 Operator Panel...................................................................................................34
7.5.2. Closing the CC300 Operator Panel.....................................................................................................37
8. Cabinet Installation.......................................................................................................................... 38
9. Maintenance and Prevention ........................................................................................................... 43
9.1. Replacing the Lithium Battery...................................................................................................................43
9.2. Replacing the Emergency Stop Switch ......................................................................................................46
9.2.1. Replacing the Button of the Emergency Stop Switch ........................................................................46
9.2.2. Replacing the Auxiliary Switch Block..................................................................................................46
9.3. Replacing the Rotary/Push Button............................................................................................................48
9.4. Replacing the Cable Gland.........................................................................................................................50
10. Technical Data ............................................................................................................................... 53
10.1. External Connectors and Interfaces ........................................................................................................54
10.2. Electrical Specifications ...........................................................................................................................55
10.3. Environmental Specifications..................................................................................................................56
10.4. Mechanical Specifications .......................................................................................................................56
10.5. International Compliance, Approvals and Certificates ...........................................................................59
11. Interfaces – Pin Assignments.......................................................................................................... 61
11.1.1. Harting Connector............................................................................................................................61
11.1.2. LAN 0, LAN 2 and LAN 3 Cable .........................................................................................................62
11.1.3. LAN 1 Cable ......................................................................................................................................62
11.1.4. DP Connector (Standard: DisplayPort 1.2).......................................................................................63
11.1.5. USB Ports..........................................................................................................................................64
11.1.6. Grounding Cable (PE) .......................................................................................................................64

1. Table of Contents CC300 Operator Panel – User Guide
Version 1.17
1.1. Table of Figures
Fig. 1: CC300 Operator Panel - Nameplate..................................................................................................... 17
Fig. 2: Bottom view ......................................................................................................................................... 21
Fig. 3: Right view ............................................................................................................................................. 21
Fig. 4: Front view............................................................................................................................................. 21
Fig. 5: Rear view .............................................................................................................................................. 21
Fig. 6: Left view ............................................................................................................................................... 21
Fig. 7: Top view ............................................................................................................................................... 21
Fig. 8: Front view of the CC300 operator panel ............................................................................................. 22
Fig. 9: On/Off button....................................................................................................................................... 23
Fig. 10: RFID-read/write zone ......................................................................................................................... 23
Fig. 11: Emergency stop switch ...................................................................................................................... 24
Fig. 12: Buttons for tilting out and in the CC300 operator panel................................................................... 25
Fig. 13: Traversing buttons below the touch display...................................................................................... 26
Fig. 14: Markings for laterally mounted USB 2.0 ports .................................................................................. 26
Fig. 15: Permissive button and program interrupt button............................................................................. 27
Fig. 16: Rotary/push button with illumination and display ............................................................................ 27
Fig. 17: Rear side of the CC300 operator panel.............................................................................................. 28
Fig. 18: Harting connector .............................................................................................................................. 29
Fig. 19: Grounding cable ................................................................................................................................. 30
Fig. 20: LAN cables .......................................................................................................................................... 30
Fig. 21: Right side of the CC300 operator panel............................................................................................. 31
Fig. 22: Left side of the CC300 operator panel ............................................................................................... 31
Fig. 23: USB ports............................................................................................................................................ 32
Fig. 24: Top view of the CC300 operator panel .............................................................................................. 33
Fig. 25: Bottom view of the CC300 operator panel........................................................................................ 33
Fig. 26: Carefully open the CC300 a few inches.............................................................................................. 35
Fig. 27: Unlocking and removing the auxiliary switch block........................................................................... 35
Fig. 28: CC300 operator panel, fully opened .................................................................................................. 36
Fig. 29: CC300 Operator Panel installed in an industrial cabinet ................................................................... 38
Fig. 30: Threaded holes and contact surfaces for holder mounting .............................................................. 38
Fig. 31: Mounting the CC300 Operator Panel to the left holder ................................................................... 39
Fig. 32: Mounting the cable gland to the cabinet........................................................................................... 39
Fig. 33: Threaded holes and contact surface for guide sleeve mounting ...................................................... 40
Fig. 34: Mounting the guide sleeve of the actuator to the CC300 ................................................................. 40
Fig. 35: Inserting the forcer into the guide sleeve of the actuator ................................................................ 41
Fig. 35: Attaching the top cover of the CC300 cabinet................................................................................... 41
Fig. 36: Inserting the forcer into the guide sleeve of the actuator ................................................................ 42
Fig. 37: Button (cap) of the rotary/push button............................................................................................. 43

1. Table of Contents CC300 Operator Panel – User Guide
8Version 1.1
Fig. 38: Unscrew the cap holder of the rotary/push button...........................................................................43
Fig. 39: Rotary/push button and CMOS battery, pulled out of the housing...................................................44
Fig. 40: Removing the rotary/push button (shown with battery removed)...................................................44
Fig. 41: Position of the label on the cap holder of the rotary/push button ...................................................45
Fig. 42: Button of the emergency stop switch ................................................................................................46
Fig. 43: Dismantling the auxiliary switch block ...............................................................................................47
Fig. 44: Switch module, cable, and mounting flange ......................................................................................47
Fig. 45: Button (cap) of the rotary/push button ............................................................................................. 48
Fig. 46: Unscrew the cap holder of the rotary/push button...........................................................................48
Fig. 47: Rotary/push button and CMOS battery, pulled out of the housing...................................................48
Fig. 48: Removing the rotary/push button (shown with battery removed)...................................................49
Fig. 49: Position of the label on the cap holder of the rotary/push button ...................................................49
Fig. 50: Remove screws of the cable gland bracket........................................................................................ 50
Fig. 51: Detached cable gland with bracket ....................................................................................................50
Fig. 52: Take the bracket out of the cable gland.............................................................................................51
Fig. 53: Cables and cable gland bracket after removing the cable gland ....................................................... 51
Fig. 54: Insert cables from the thicker end into the cable gland ....................................................................52
Fig. 55: Cable gland with inserted bracket (shown without cables) ...............................................................52
Fig. 56: Dimensioned view of the CC300 glass front (print side - reversed image)........................................57
Fig. 57: Dimensioned rear and side view of the CC300 operator panel .........................................................58

2. Introduction CC300 Operator Panel – User Guide
Version 1.19
2. Introduction
Kontron Europe GmbH would like to point out that the information contained in this manual may be
subject to technical alteration, particularly as a result of the constant upgrading of Kontron Europe GmbH
products. The attached documentation does not entail any guarantee on the part of Kontron Europe
GmbH with respect to technical processes described in the manual or any product characteristics set out in
the manual. Kontron Europe GmbH does not accept any liability for any printing errors or other
inaccuracies in the manual unless it can be proven that Kontron Europe GmbH is aware of such errors or
inaccuracies or that Kontron Europe GmbH is unaware of these as a result of gross negligence and Kontron
Europe GmbH has failed to eliminate these errors or inaccuracies for this reason. Kontron Europe GmbH
expressly informs the user that this manual only contains a general description of technical processes and
instructions which may not be applicable in every individual case. In cases of doubt, please contact
Kontron Europe.
This manual is protected by copyright. All rights are reserved by Kontron Europe. Copies of all or part of
this manual or translations into a different language may only be made with the prior written consent of
Kontron Europe GmbH. Kontron Europe GmbH points out that the information contained in this manual is
constantly being updated in line with the technical alterations and improvements made by Kontron Europe
GmbH to the products and thus this manual only reflects the technical status of the products by Kontron
Europe GmbH at the time of printing.
© 2020 by Kontron Europe
Printing and duplication, even of sections, is only permissible with the express approval of
Kontron Europe GmbH
Lise-Meitner-Str. 3-5
86156 Augsburg
Germany

2. Introduction CC300 Operator Panel – User Guide
10 Version 1.1
2.1. Symbols used in this User Guide
Symbol Meaning
This symbol indicates the danger of injury to the user or the risk of damage to the product
if the corresponding warning notices are not observed.
This symbol indicates that the product or parts thereof may be damaged if the
corresponding warning notices are not observed.
This symbol indicates general information about the product and the user guide.
This symbol indicates detail information about the specific product configuration.
This symbol precedes helpful hints and tips for daily use.