KornKraft Fabula User manual

Instruction manual – Fabula
You are the owner of the model Fabula a high-quality manual grain
mill. It was manufactured for you by artisanal craftsmanship.
Before you start the milling, please note the following points:
The milling
Keep the mill between the thighs – close to the knees – in a sitting
position. The grinded sides make it easier to hold. Turn the handle to
the right (clockwise)
Running in
First you should run the mill in. Do this by milling approx. 30 gramms
(One tablespoon)
of dry grains (wheat, millet or barley are particularly suitable
for this) at a medium setting.
Turn the handle clockwise.
The first time you use the mill, abrasion of the millstone occurs
which is perfectly harmless to health but can contain stone
particles. That’s why it is not suitable for consumption.
Setting the fineness
Select the desired coarseness by removing the collection cup
by turning to the left. For a fine grinding turn the adjustment
knob to the right and for a coarse grinding turn it to the left.
Insert the collection cup again and fix it by turning to the
right. (Please do not fasten too tightly!) Fill in the grains and
try the fineness of grinding, If necessary readjust.
Suitable grains
You can use the mill to grind all types of grain, except corn.
To grind oil seeds, mix them with dry grains. If you grind oat
types with a high oil content at fine settings, the grinding
mechanism may clog. (See cleaning and care). Please use only
dry and cleaned grains.
Desk mount available
as optional accessory
Michael Gergen
Hüttenstraße 6
D-66839 Schmelz
Tel. [phone]
Fax. [phone] - 77 77 24
www.kornkraft.de
[email protected]
GETREIDEMÜHLEN

Maintenance
The grinding mill consists of particularly hard natural stones that are incorporated into a
magnesit-salt bond. The grindstones have a long lifetime.
To preserve the ease of operation of the handle, we recommend you to apply a physiological
harmless lubricant (white Vaseline) approx. once a year.
Cleaning and care
Normally it is not necessary to clean the grinding mechanism. However, if it does become
clogged (by wetly cereals or oil seeds) we recommend you to grind one tablespoon of rice
(no parboiled rice) at a medium setting. Rice is very dry and brittle so it lifts off the sticky
residues and cleans the grinding mechanism.
Due to a surface treatment of beeswax balm the mill is protected from dirt.
You can clean the mill housing with a damp cloth, never apply water directly.
The contact with water causes cracks at the wood and it becomes unusable.
Do not keep the mill in an extremely dry place (above a source of heat) or an
extremely moist place (water vapor above a cooker). This could cause the
wood to warp.
10 years from the date of purchase for defects attributable to material or
manufacturing defects.
To ensure your warranty, please keep your receipt!
Warranty
Made
in Germany
Warranty
10 years
Michael Gergen
Hüttenstrasse 6
D-66839 Schmelz
Phone [phone]
Fax. [phone]
G e t r e i d e m ü h l e n