kozy heat BELLINGHAM 44 User manual

BELLINGHAM 52 & 44
DIRECT VENT GAS FIREPLACE
QUALITY FIREPLACES FOR LIFE.
Bellingham 52 with Herringbone and optional
4 piece exterior trim kit. Shown as a front vented
cavity installation.

BELLINGHAM 52 & 44
Refractory Options
Bellingham 44 with Black Glass panels
and an optional rectangle surround
Standard Black firebox
Chicago Brick
Herringbone
Ledgestone
Black Glass Panel
2
Bellingham 52
Bellingham 44
Burn Video

3
BELLINGHAM 52 & 44
Specifications
88"
54-1/2"
50-1/2"
30-7/8"
65-5/8"
58-5/8"
52-7/16"
41-1/4"
28-3/4"
88"
60-1/2"
22"
24-7/8"
57-5/8"
50-5/8"
44-7/16"
35-1/4"
46-1/4"
4-1/4"
65-5/8"
28-3/4" 50-1/2"
TV recess
Ceiling/Fireplace
enclosure top
Double horizontal
header
88"
Electrical
Access
Power Vent
Wire Harness
Hole
Gas Line
Access Hole
6"
13-3/4"
15-3/16"
24-5/16"
LEFT SIDE VIEW
Electrical
Access
Power Vent
Wire Harness
Hole
Gas Line
Access Hole
4-3/4
13-3/4"
13-1/16"
17-11/16"
LEFT SIDE VIEW
Bellingham 52
Bellingham 44
4-1/4"
88"
46-1/4"
22"
57-5/8"
TV recess
Ceiling/Fireplace
enclosure top
Double horizontal
header

BELLINGHAM 52 & 44
Vent System Approval
& Requirements
Model Bellingham 52 Bellingham 44
Height 41-1/4” 35-1/4"
Width 58-5/8” 50-5/8”
Depth 26-9/16” 20"
Weight 510 lbs 330 lbs
Viewing Area 52-7/16" x 30-7/8" 44-7/16" x 24-7/8”
BTU NG High/Low 59,500 / 18,500 49,500 / 18,500
BTU LP High/Low 59,500 / 21,500 49,500 / 18,500
ENERGUIDE P.4 NG / LP 65.20% / 65.80% 63.03% / 63.50%
Steady State NG / LP 67.58% / 66.58% 65.01% / 66.49%
AFUE % NG / LP 65.91% / 66.61% 63.87% / 64.43%
Valve System IPI IPI
Split-Flow Burner Standard Standard
Required Panels/Refractory Black Glass, Chicago, Ledgestone, Herringbone
Screen Front Standard Standard
Ceramic Glass Standard Standard
Top Accent Light Kit Standard Standard
Ember Bed Light Kit Standard Standard
Fan Kit Standard Standard
Horizontal Power Vent Optional Optional
Model Bellingham 52 Bellingham 44
From appliance top, left & right, and
back stand-off brackets 0" 0"
From appliance corners 2" 2"
From appliance front 36" 36"
From finishing edge to adjacent
sidewall 6" 6"
Fireplace finishing edge to ¾” trim 8" 16"
Mantel 6” deep from fireplace finishing edge 11-1/2” 19-1/2”
Minimum rough opening height 50-1/2” 46-1/4”
Minimum rough opening width 65-5/8” 57-5/8”
Minimum rough opening depth 28-3/4” 22”
Minimum height of fireplace enclosure 88” 88”
Base of the fireplace to ceiling 88” 88”
Fireplace finishing edge to ceiling 54-1/2” 60-1/2”
Any venting to enclosure top for
horizontal terminations 11” 16-1/4”
Model Bellingham 52 Bellingham 44
Komfort Zone Kit Optional Optional
Vented Cavity Optional Optional
Heat Transfer Kits Optional Optional
Features, Options & Specifications are subject to change.
Clearances to Combustibles
Heat Management Options
Refer to the installation manuals for complete installation & venting requirements. See
additional mantel clearance configurations in the installation manual.
Each unit factory tested
See Install Manual for details.
Approved 5" x 8" venting with the ability to reduce
down. Refer to the vent pipe manufactures’ installation
manual for more information.
In order to continually provide the highest quality product available, features/options, specifications &
dimensions are subject to change. Refer to the unit installation manual for complete installation instructions.
Installation must conform with local building codes. In some regions it may be possible that this appliance
qualifies for an energy rebate. See your local dealer for details regarding promotions and qualifications.
Manufactured by Hussong Mfg. Co., Inc.
204 Industrial Park Road, Lakefield, MN 56150
Phone [phone] www.kozyheat.com
For complete information on the Kozy Heat
product line, please contact us at:
Product Line:
FOR CALIFORNIA RESIDENTS ONLY
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including Carbon Monoxide, that is an externally
vented by-product of fuel combustion, which is [are] known to the State of California to cause birth
defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
8-20
The overhang (A) must be a minimum of 1/2 or greater of the
roofline elevation (B) above the base of the fireplace.
The width of the overhang to each side of the appliance (C) must be a minimum
of 1/2 or greater of the roofline elevation (B) above the base of the fireplace.
EXAMPLE: If roofline (B) is 10 ft. above the base of the fireplace, the overhang (A) must be 5 ft. or greater. The width of the overhang to
EACH side of the fireplace (C) must be 5 ft. or greater.
• Fireplace operation is approved from 40 degrees F to 110 degrees F
• All wiring connections shall be in accordance with outdoor requirements of NECA NFPA 70
• All clearances and requirements in your appliance manual must be adhered to
Outdoor Covered Fireplace Install
A
B
CC
SIDE OF
FIREPLACE
BACK OF
FIREPLACE
FRONT OF
FIREPLACE
ROOF OVERHANG
A
B
CC
SIDE OF
FIREPLACE
BACK OF
FIREPLACE
FRONT OF
FIREPLACE
ROOF OVERHANG