Kramer 101L User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
101L
Video Line Amplifier
P/N: 2900-000160 Rev 2

101L – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the 101L Video Line Amplifier 4
4Connecting the 101L 5
5Technical Specifications 6
Figures
Figure 1: 101L Video Line Amplifier 4
Figure 2: Connecting the 101L Video Line Amplifier 5

101L - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer 101L Video Line Amplifier, which is
ideal for the following typical applications:
Professional display systems that require long distance delivery of high
quality video
CCTV, medical, and sports applications

2
101L - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer 101L away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!

101L - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
!

4
101L - Overview
3 Overview
The high performance 101L Video Line Amplifier is used for amplifying the video signal
intensity and improving the image sharpness (the picture quality) when a video signal is
transmitted over a long cable.
In particular, the 101L features:
Extra-wide bandwidth of 500MHz
Gain and equalization trimmer controls to compensate for signal losses
inherent in long cable runs, recessed to prevent tampering
3.1 Defining the 101L Video Line Amplifier
This section defines the 101L.
Figure 1: 101L Video Line Amplifier
#
Feature
Function
1
VIDEO OUT BNC Connector
Connects to a video acceptor
2
VIDEO IN BNC Connector
Connects to the video source
3
12V DC
+12V DC connector for powering the unit
4
CONTROL EQ. Trimmer
Adjusts the cable compensation equalization level
5
CONTROL LEVEL Trimmer
Adjusts the output signal level
6
ON LED
Illuminates when receiving power

101L - Connecting the 101L
5
4 Connecting the 101L
Always switch off the power to each device before connecting it to your
101L. After connecting your 101L, connect its power and then switch
on the power to each device.
To connect the 101L, as illustrated in the example in Figure 2, do the following:
1. Connect the video source (for example, a composite video camera) to the
VIDEO IN BNC connector.
It is recommended that you connect the 101L closer to the source than to the acceptor.
2. Connect the VIDEO OUT BNC connector to a video acceptor (for example, a
composite display).
3. Connect the 12V DC power adapter to the power socket on the 101L, and
connect the adapter to the mains electricity.
The ON LED illuminates.
4. If required, adjust the output signal level (LEVEL) and/or cable
compensation equalization level (EQ.) with a small screwdriver.
Figure 2: Connecting the 101L Video Line Amplifier
i

6
101L - Technical Specifications
5 Technical Specifications
INPUT:
1 composite video, 1Vpp/75on a BNC connector
OUTPUT:
1 composite video, 1Vpp/75on a BNC connector
MAX. OUTPUT LEVEL:
2.5Vpp
BANDWIDTH:
500MHz
DIFF. GAIN:
0.03%
DIFF. PHASE:
0.03Deg.
S/N RATIO:
75dB
CONTROLS:
Level: -0.8dB to 6.5dB; equalization: 0dB to 8dB @ 5MHz
COUPLING:
DC
POWER CONSUMPTION:
12V DC, 60mA
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
5.32cm x 4.36cm x 7.25cm (2.09" x 1.72" x 2.85") W, D, H
WEIGHT:
0.15kg (0.55lbs) approx.
ACCESSORIES:
Power supply
OPTIONS:
RK-1 19”rack adapter
Specifications are subject to change without notice at http://www.kramerelectronics.com