Kramer ACC3-12-SP User manual

ACC3-12-SP Quick Start
P/N:
2900- 301681QS
Rev:
1
Scan for full manual
ACC3-12-SP Quick Start Guide
This guide helps you install and use your ACC3-12-SP for the first time.
Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check what’s in the box
ACC3-12-SP 1:2 CAT Cable Splitter
1 Bracket set
4 Rubber feet
1 Quick start guide
Step 2: Get to know your ACC3-12-SP
#
Feature
Function
1
CAT A+B RJ-45 Port
Connect to a compatible CAT transmitter (for example an SWT3-41-U-T) to send
combined signals over the A+B port.
2
CAT A RJ-45 Port
Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R).
3
CAT B RJ-45 Port
Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R).
Step 3: Mount ACC3-12-SP
Install ACC3-12-SP using one of the following methods:
•Attach the rubber feet and place the unit on a flat surface.
•Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/ACC3-12-SP).
•Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/ACC3-12-SP).
•Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•Avoid uneven mechanical loading.
•Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your ACC3-12-SP.