Kraus StandardPRO KHT301-18 User manual

KHT301-18 / KHT301-18/5.5 / KHT301-25 /
KHT300-33 / KHT302-33 / KHT301-22L /
KHT301-25L
StandardPRO Thick Deck Stainless
Steel Top Mount Kitchen Sink
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. July 14, 2020
R
INSTALLATION GUIDE

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have
any questions, require technical assistance or have any problems with your product:
2
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for
reference.
If for any reason this product does not meet your expectations, please be sure to repack this
product in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

3
Prior to Installation:
·Make sure that you have all necessary parts by checking the parts list. If
any part is missing or damaged, please contact Kraus Customer Service at
800-775-0703 for a replacement
·Inspect the sink prior to installation to make sure that it has not been
damaged or during shipping
·Use the cut-out template provided by Kraus
·Observe all plumbing and building codes according to your state
requirements
For technical assistance or replacement parts, please contact Kraus Customer Service
and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Should
there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a
licensed professional.

4
Tools you will need:
4
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with
countertop materials other than wood, marble or granite.
Parts List
·Cut-Out Template
·Mounting Hardware
·Bottom Grid
·Drain
·Drain Cap
Safety Goggles
Gafas protectoras
Silicone Adhesive
Adhesivo de silicona
Jig Saw
Sierra caladora
Phillips Screwdriver
Destornillador de estrella (Phillips)
Putty Knife
Espátula
Tape Measure
Cinta métrica
Pencil
Lápiz
Scissors
Tijeras
Screwdriver
Destornillador
Drill
Taladro

55
Dimensions:
22" (559mm)
18" (457mm)
4 1/2"
(114mm)
12"
(304.8mm)
R 0"
(0mm)
1 1/2"
(38mm)
3 1/2"
(90mm)
22" (559mm)
20" (508mm)
R 1/8"
(4mm)
R 1/8"
(2.5mm)
33" (838mm)
31" (787mm)
22" (559mm)
18" (457mm)
3 1/2"
(90mm)
10"
(254mm)
4 1/2"
(114mm)
Ø1 3/8"
(35mm)
R 3/8"
(10mm)
Model #: KHT300-33
Sink Dimensions: 33” x 22” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-300-33
Drain Model #: ST-1
Drain Cap #: STC-2
Model #: KHT301-18
Sink Dimensions: 18” x 18” x 10”
Min Cabinet Size: 20”
Matching Grid: KBG-301-18
Drain Model #: ST-1
Drain Cap #: STC-2
Ø1 3/8"
(35mm)
18" (457mm)
14" (356mm)
4 1/2"
(115mm)
18" (457mm)
16" (406mm)
10"
(254mm)
R 3/8"
(10mm)
R 3/8"
(10mm)
R 3/8"
(10mm)
Model #: KHT301-18/5.5*
Sink Dimensions: 18” x 18” x 5.5”
Min Cabinet Size: 20”
Matching Grid: KBG-301-18
Drain Model #: ST-1
Drain Cap #: STC-2
Model #: KHT301-22L
Sink Dimensions: 22” x 22” x 12”
Min Cabinet Size: 24”
Matching Grid: KBG-301-22
Drain Model #: ST-1
Drain Cap #: STC-2
R 1/8"
(2.5mm) R 1/8"
(2.5mm)
1 1/2"
(38mm)
1 1/2"
(38mm)
Ø1 3/8"
(35mm)
3 1/2"
(90mm)
Typical note: *= Special Order
Ø1 3/8"
(35mm)
18" (457.2mm)
14" (355.6mm)
4 1/2"
(115mm)
18" (457.2mm)
16" (406.4mm)
5 1/2"
(139.7mm)
R 3/8"
(10mm)
R 3/8"
(10mm)
R 1/8"
(2.5mm)
1 1/2"
(38mm)
3 1/2"
(90mm)
3"
(76.2mm)

66
25" (635mm)
23" (584mm)
22" (559mm)
18" (457mm)
3 1/2"
(90mm)
10"
(254mm) 4 1/2"
(114mm)
Dimensions:
25" (635mm)
23" (584mm)
22" (559mm)
18" (457mm)
3 1/2"
(90mm)
12"
(304.8mm)
4 1/2"
(114mm)
R 0"
(0mm)
1 1/2"
(38mm)
1 1/2"
(38mm)
3 1/2"
(90mm)
R 1/8"
(2.5mm)
Model #: KHT301-25
Sink Dimensions: 25” x 22” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-301-25
Drain Model #: ST-1
Drain Cap #: STC-2
Model #: KHT301-25L
Sink Dimensions: 25” x 22” x 12”
Min Cabinet Size: 27”
Matching Grid: KBG-301-25
Drain Model #: ST-1
Drain Cap #: STC-2
R 3/8"
(10mm)
R 3/8"
(10mm)
Ø1 3/8"
(35mm)
R 1/8"
(2.5mm)
Ø1 3/8"
(35mm)
R 1/8"
(4mm)
33" (838mm)
31" (787mm)
22" (559mm)
18" (457mm)
3 1/2"
(90mm)
10"
(254mm)
4 1/2"
(114mm)
15 1/2"
(394mm)
15 1/2"
(394mm)
6"
(152mm)
Model #: KHT302-33
Sink Dimensions: 33” x 22” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-302-33 x 2
Drain Model #: ST-1 x 2
Drain Cap #: STC-2 x 2
3 1/2"
(90mm)
R 1/8"
(2.5mm)
R 3/8"
(10mm)
Ø1 3/8"
(35mm)
R 3/8"
(10mm)

7
NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Paper Template
Step 1. Position Template
·Check the cut-out template against the actual sink to ensure a proper sized cut-out.
·Place the cut-out template in the desired location on the countertop.

8
Paper Template
Step 2. Trace Template
·Trace template on countertop with a pencil.

9
Step 3. Cut Countertop
·Cut the opening in the countertop by carefully following the traced line.
NOTE: Please use the appropriate saw that best fits your countertop material.

10
Step 4. Attach Mounting Hardware
·Attach mounting hardware to the prongs protruding from the underside of the sink rim.
·Make sure the hooked side of the mounting clip is facing away from the sink.
See Details
Push