Kraus Riviera FVS-1005 User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. October 17, 2019
RivieraTM Single Lever
Vessel Faucet
FVS-1005
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 3/8" (min)
·Max countertop thickness: 1 3/8”
3
Tools Required
Adjustable Wrench Phillips Screwdriver Silicone Sealant
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
Pipe Tape Hex Wrench Groove Joint

44
• Collection Name
• Mount Type
Vessel Mixer
Deck Mount
• Mounting Type
• Material
• Gross Weight (Lbs)
• Length
• Width
• Faucet Holes / Holes Required
• Faucet Height
• Spout Reach
• Spout Height
• Flow Rate (GPM)
• Low Lead Compliant
• Warranty
Single-hole, top-mount
Solid Brass
4.70
5.50
5.50
1
13.10
5.50
8.10
1.50
Yes
Limited Lifetime
BEFORE YOUR INSTALLATION:
Check to make sure you have the following parts indicated below

55
Installer Tip:
Shut off main water supply before installing new faucet.
Faucet Dimensions
1/16"~3/4"
(1mm~20mm)
3 7/8"
(100mm)
5 7/8"
(150mm)
2 3/8"
(59mm)
1/2"
(14mm)
7" (179mm)
Ø2 1/8"
(54mm) 5 1/2"
(140mm)
2-1/2"-14NPSM-2A
13" (331.7mm)
8 1/4"
(209.5mm)
18°