KREAFUNK aGlow User manual

aGLOW
Operation manual
Bedienungshandbuch
Manual de instrucciones
Manuel d’utilisation
Brugermanual
Portable Bluetooth Speaker Box

2

3
English 4
Deutsch 16
Español 16
Français 22
Dansk 28
This product is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/
FCC-ID: 2ACVCKREAFUNK1

4English
English
Operation manual

5
English
TABLE OF CONTENTS
1. Main features and Technical Parameters
2. Product illustration
3. Key functions
4. BT playback
5. Audio input mode
6. Power supply and Emergency Power Bank
7. Night Light function
8. Troubleshooting
9. Packing Accessories
Read the instruction manual before use.

6English
1. Main features and
Technical Parameters
1. BT audio player
2. Hands free function
3. Power Bank function
4. Ø3.5mm audio input interface
5. Audio Max power: 5W*1
6. Frequency response: 20Hz-
20kHz
7. Max. power consumption: 1W
8. Built-in high capacity
rechargeable Lithium ion-
Battery.
9. Input: 5V/1A
10. Output:5V/1A
11. Charging time: around 7 hours
12. Continue playing music about
18 hours when the built-in
lithium battery is fully charged.
13. Nightlight about 15 hours when
built-in lithium battery is fully
charged.
14. Water resistance level: IPX4
2. Product Illustration
1. Chargin Indicator
2. State Indicator
3. Micro USB
4. USB 5V Output
5. AUX Line-in
6. Light ON/OFF
7. Volume Up / Next
8. Volume Down / Previous
9. Multifunction
1
2
3
4
5
6
7
8
9

7
English
3. Key functions
No Current
mode
Function
operating
Button Operation Indicator
1Power o Power on Long press
for 2
seconds
Status indica-
tor is ON
2 Power on Power o Long press
for 5
seconds
Status indica-
tor is OFF
3 Power on BT pairing Manually
paired
Blue status
indicator
is ashing
rapidly
4 Power on BT pair
success-
fully
Automatically
paired
Blue status
indicator
is ashing
slowly
5 Power on Call back Double click
6 Call mode Answer
call
Short press
once
7 Call mode Reject call Long press

8English
8 Talk mode End call Short press
once
9 BT mode Volume Up Long Press
10 BT mode Volume
Down
Long Press
11 BT mode Previous
song
Short Press
once
12 BT mode Next song Short Press
once
13 BT mode Pause/
Play/Mute
Short press
circcle
14 Any mode Charging Red charging
indicator is
as
15 Any mode Battery is
full
Red charging
indicator
become
always on
16 Any mode Power
Bank
function
Green
chargin indi-
cator On

9
English
17 BT mode Audio input Audio cable
is pluged into
the audio
input
Green status
indicator
is ON
18 Audio
mode
BT mode Unplug The
audio cable
Blue status
indicator
is ON
19 Any mode Night light
ON/OFF
Short press
circle
20 On Mode Dimmer Long press The bright-
ness is
ascending og
descenting
regulation
4. BT playback
1. Press and hold the button for 2 seconds to turn on the aGLOW. A blue
LED status indicator will ash to indicate that the product is activated.
2. Turn on the BT function on your mobile phone or BT device and search
for devices in the BT menu.
3. When “aGLOW” appears on the BT device list, select “aGLOW” to
establish pairing and connect. (If a passkey is required, enter 0000).
When the pairing and connection is successful, you will hear a “BIP”

10 English
and the LED indicator is
now slowly ashing blue. The
aGLOW is now ready to play
your favorite tunes. Short press
to play music.
4. When the connection between
your device and the aGLOW is
successful, and the speaker
is playing, the music will be
stopped when you receive an
incoming call. One shortpress
at the will answer the call
and use the aGLOW as a hands
free device. One long press at
/ will adjust the volume.
Please keep within 1-meter
distance during the phone
call. Short-press to hang
up the phone. The aGLOW will
automatically return to playing
music. To reject the incoming
call, press and hold for 2
seconds. To redial the previous
call number, short-press
twice.
5. If the pairing is unsuccessful
or if there is no ash indicator
showing, please repeat step 1
to 3 for re-connection.
5. Audio input mode
MP3, iPOD, mobile phone or other
audio products, which features mini
Jack cable, can be used. The green
indicator should now be on.
1. Insert 3.5mm /mini jack audio
cable into the audio input port.
2. Press and hold / to
adjust thevolume.
3. In ‘audio line-in’ mode, short-
press to play/pause. The
skip / next-function is not
available in this mode. Please
control music through your
music device.
4. Pull out the audio cable to
disconnect the aGLOW. The

11
English
aGLOW will switch back to
BTmode and the blue status
indicator will ash. The aGLOW
will automatically pair with the
last connected device.
6. Power supply and
Emergency Power Bank
1. Connect DC 5V adapter with
the Micro USB for to recharge
the builtin rechargeable
lithium battery. The red power
indicator will ash when
the aGLOW is connected to
power and charging. When the
aGLOW is fully charged, the red
indicator will light continuously.
Disconnect the adapter when
the aGLOW is fully charged.
2 The aGLOW features a high
capacity lithium ion polymer
battery and can recharge your
smartphone or any other device
that requires 5v1A. The green
indicator will light up when
charging. When the green
indicator ashes, it means that
the aGLOW is low on power.
3. Besides the BT connection,
aGLOW can also be connected
through AUX/Line-in.
4. The speaker is powered by the
built-in rechargeable battery.
When the speaker is charging
andconnected to power, it is not
aected whether the speaker is
in ON or OFF
5. The power bank function
cannot be used when aGLOW
is connected to power and
recharging.
7. Night Light function
1. The BT speaker is tted with a
night light function.
• Please press for light
ON/OFF or
• press and hold to adjust
the dimmer function.

12 English
8. Troubleshooting
Problem Solution
BT playback inter-
rupt and produce a
sound,
Lower battery, please charge
Fail to turn on
Music intermittent
in BT playback
Try to move the BT device closer to the product or
change the audio or equipment location
Equimpment can-
not pair with BT
audio connection
Lower battry , please charge
Try to move the BT device closer to the speaker
Turn o & restart
Device or the computer does not have BT function.
Try repeating the set-up steps
Play the music on one device only , cancel other
Equipment and unused pairs (see the documents
for help), in accordance with the procedure set
pairing for new devices
BT name is not correct; conrm that it is the
aGLOW.

13
English
No call function Repair again
Check the setting of the phone(see the phone
manual)
Key failure Low battery, please charge
Turn o & restart
Please use the original adapter for this item.
Weak sound
Press the key to adjust the volume
Emergency Power
bank: no power out
Low battery, please recharge
The aGLOW is charging
9. Packing accessories
1. Micro USB cable x 1
2. Line in audio cable x 1
3. An adapter (optional)
4. Instruction manual x 1
Caution:
1. Keep the product away from rain and damp, in order to avoid damage.
2. The product should be kept away from re and high temperature
environment to avoid failure.

14 English
3. When the aGLOW is playing
music via BT technology, the
music can be interrupted
by noise because of the
environment, the source
device (such as mobile phones)
interference or software
incompatibilities etc… Please
adjust the distance between the
music device and the unit, or
restart the unit’s power supply
or restart the music device
or change to another music
source.
4. When a phone call is answered
by BT technology, the call
can be interrupted by noise
because of the environment,
the source device (such as
mobile phones) interference
or software incompatibilities
etc… Please adjust the distance
between the device and the
unit, or restart the unit’s power
supply or restart the music
device or change to another
music source.
5. Do not touch the speaker or
the speaker collision with other
objects to avoid damaging to
the speakers.
6. The power supply output 5V
and current 1A or more.
7. If the aGLOW has not been used
for a long time, please make
sure it is fully charged .
8. The product has a built-in
rechargeable lithium battery,
please do not pollute the
environment when discarded.
Try to recycling.
9. The aGLOW should be fully
charged before taken into use.

15
English

16 Deutsch
Deutsch
Bedienungshandbuch

17
Deutsch
INHALTSVERZEICHNIS
1. Hauptmerkmale und technische Angaben
2. Produkt Illustration
3. Haupt Funktionen
4. BT playback
5. Audio input-Modus
6. Stromanschluss und Notfall Power Bank
7. Nachtlicht-Funktion
8. Troubleshooting
9. Verpackungszubehör
Lesen Sie Bedingungsanleitung vor Benutzung.

18 Deutsch
1. Hauptmerkmale und
technische Angaben
1. BT Audio spieler
2. Freisprechfunktion
3. Power Bank-Funktion
4. Ø3.5mm Audio Input
5. Audio Max power: 5W*1
6. Frequenzgang: 20 Hz - 20 kHz
7. Max. Stromverbrauch: 1W
8. Eingebaute wiederauadbare
Lithium-Ionen-Batterie mit
hoher Kapazität.
9. Eingang: 5V/1A
10. Ausgang: 5V/1A
11. Ladezeit: etwa 7 Stunden
12. Spielen Sie bis zu 18 Stunden
Musik, wenn die Lithiumbatterie
vollgeladen ist.
13. Nachtlicht bis zu 15 Stunden,
wenn die Lithiumbatterie
vollgeladen ist.
14. Wasserfestigkeitsgrad: IPX4
2. Produkt Illustration
1. Chargin Indicator
2. State Indicator
3. Micro USB
4. USB 5V Output
5. AUX Line-in
6. Light ON/OFF
7. Volume Up / Next
8. Volume Down / Previous
9. Multifunction
1
2
3
4
5
6
7
8
9

19
Deutsch
3. Haupt Funktionen
No Current
mode
Function
operating
Button Operation Indicator
1AUS AN Für 2 Sekun-
den gedrückt
halten
Statusan-
zeige ist AN
2 AN AUS Für 5 Sekun-
den gedrückt
halten
Statusanzeig
e ist AUS
3 AN BT-Paaren manuell
gepaart
Blauer
Statusindikat
or blinkt
schnell
4 AN BT-Paaren
erfolgreich
automatisch
gepaart
Blauer
Statusindikat
or blinkt
langsam
5 AN Zurückrufen Doppelklick
6 Anruf-
mod
us
Anruf entge-
genneh men
Einmal kurz
gedrückt
halten

20 Deutsch
7 Anruf-
modus
Anruf ableh-
nen
Lange
gedrückt
halten
8 Sprech
Modus
Anruf beenden Einmal kurz
gedrückt
halten
9BT
Modus
Lautstärke
erhöhen
Lange
gedrückt
halten
10 BT
Modus
Lautstärke
verringern
Lange
gedrückt
halten
11 BT
Modus
Vorheriges
Lied
Einmal kurz
gedrückt
halten
12 BT
Modus
Nächstes Lied Einmal kurz
gedrückt
halten
13 BT
Modus
Pause/Play/
Stumm
Einmal kurz
Kreis drücken