Krowne ROYAL 16-656 User manual

Single Hole Deck Mount Sensor
Faucet with Angled Spout, Built-In
Control Module Installation Manual
16-656
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
16-656 Installation Manual
A
N
O
B
C
E
F
D
G
H
K
M
L
I
J
Letter Description
ATop cover
BPhilips screw
CSensor
DAerator
ESpout body
FThreaded nipple
GRubber washer
HFixation gasket
IFixation nut
JWater hose
KFilter Adapter 1/2” to
1/2”
L(4) AA batteries
MBattery case
NMagnet
OSocket Wrench
PHot & cold water lines
QMechanical mixing
valve
Q
P

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
16-656 Installation Manual
Installation Instructions
1. Ensure that water supply is turned off at the stops.
2. Remove faucet from packaging and inspect that all included components are present.
3. Using a Philips head screwdriver, remove the set screw (B) on the underside of the faucet
body (E).
4. Remove the end cap (A) of the faucet to expose the battery compartment.
5. Carefully remove the battery case (M), and install the included (4) AA batteries (L) into the case.
(Be careful to follow proper orientation).
6. Guide the faucet through sink deck or counter hole. Be sure to install the oval gasket (G)
between the faucet body and the mounting surface.
7. Secure the faucet to the sink deck or counter with the included cup washer (H) and locking
nut (I). Align the faucet so that it is level and tighten the lock nut using the included socket
wrench (O).
8. Connect both the included water lines (P) to the hot and cold stops. Tighten.
9. Connect the hot and cold water lines (P) to the inlets of the included mechanical mixing
valve (Q).
10. Install the included in-line debris lter (K) to the single outlet of the mechanical mixing valve (Q).
11. Connect outlet water line (J) from the debris lter (K) to the faucet supply nipple (F) and tighten.
12. Set mechanical mixing valve adjustment tab in centered position (this can be adjusted for
temperature).
13. Turn hot and cold water stops on and verify that no leaks are present.
14. Wave hand or object in front of sensor (C) to ensure operation.
EG
I
F
O
H

16-656 Installation Manual
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
100 Haul Rd. • Wayne, NJ 07470
krowne.com
This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corpora-
tion (hereinafter “Krowne”) with respect to the product purchased by Purchaser (the “Equipment). By accepting delivery of the
Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All dened terms within the Warranty shall
have the same meaning and denition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be
warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these
terms and conditions upon receipt of full payment for the equipment.
Please visit krowne.com/warranty for full terms and conditions regarding
the warranty on your new Royal Series product.
Warranty
krowne.com/faucetflex
Effortlessly configure a faucet,
pre-rinse and much more
Instant spec sheet generation
Instant price generation
Product Description Warranty Period
Royal Series Plumbing 1 Year