Krowne Royal Series User manual

8” Center Wall Mount Faucet
Installation Manual
14-8 Faucets
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
14-8 Faucets Installation Manual
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
Installation Instructions
1. Turn off water supply at main source before proceeding with installation.
2. Remove the two 1/2” threaded nipples (A) from the wall mount kit inside the box.
3. Apply thread sealant tape or pipe joint compound to one side of each of the two threaded
nipples (you will apply to the other side after step #4 is completed).
4. Install the sealant-applied side of the threaded nipples into the two 1/2” female threaded
coupling anges (B) and tighten properly. Note that the coupling anges have eccentric
centers, meaning if the holes in the mounting surface are not exactly 8” on center, you can
slightly adjust the center distance.
5. From the front of the sink, insert the threaded nipples into the faucet holes in the sink. Make
sure the coupling anges are turned so the brass nipples are at the 12 o’clock position. This
is necessary to make sure the faucet is level.
6. Apply thread sealant tape or pipe joint compound to the other side of each of the two
threaded nipples (A).
7. From the back of the sink, place the black rubber washer, rosette, and lock nut from the
included mounting kit onto the threaded nipples and tighten with a wrench.
8. From the front of the sink, insert the rubber washers (D) into the coupling anges (B).
9. Install the faucet body (E) onto the coupling anges and tighten properly with a wrench. If
the faucet does not t on the coupling anges, they will need to be rotated to t the faucet as
per step 4 above.
10. From the front of the sink, install the spout (F) and tighten properly.
11. From the back of the sink, install the water supply lines and tighten properly.
Sink/Mounting
Surface
Black Rubber Washer
Rosette
Lock Nut
Note: For easy installation, we highly recommend using our E-Z Install Flexible Water Lines
(Model 21-443L). They include 1/2” NPT close elbows with swivel compression ttings on the
faucet side and 3/8” compression ttings on the water supply side. No thread sealant tape or
soldering required.
AE
D
F
B

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
14-8 Faucets Installation Manual
Scan to view
aerator options
Parts Guide
Accessories
No. Model Description
1 21-420L 6” Swing Spout
1 21-421L 8” Swing Spout
1 21-422L 10” Swing Spout
1 21-423L 12” Swing Spout
1 21-424L 14” Swing Spout
No. Model Description
1 21-425L 16” Swing Spout
1 21-428L 6"W Gooseneck Spout
1 21-429L 8-1/2”W Gooseneck Spout
1 21-431L 6”W Double Bend Spout
1 21-432L 8-1/2”W Double Bend Spout
No. Model Description
2 21-308L Cold 1/4 Turn Ceramic Cartridge Valve
3 21-309L Hot 1/4 Turn Ceramic Cartridge Valve
4 21-333L Cold 1/4 Turn Ceramic Cartridge Valve, Less Handle
5 21-334L Hot 1/4 Turn Ceramic Cartridge Valve, Less Handle
6 21-306 Lever Handle Kit (includes hot & cold handles)
7 21-401L Coupling Flanges (includes 2/ea)
8 21-194L Wall Mounting Kit (includes 2/ea: nipples, lock nut, rosette, washer)
Model Description
21-311 Wrist Blade Handle Kit (includes hot & cold handles)
21-443L E-Z Install Flexible Water Line Kit
25-150 Thread Sealant Tape
1
8
7
2
3
4
5
6

14-8 Faucets Installation Manual
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
100 Haul Rd. • Wayne, NJ 07470
krowne.com
This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corpora-
tion (hereinafter “Krowne”) with respect to the product purchased by Purchaser (the “Equipment). By accepting delivery of the
Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All dened terms within the Warranty shall
have the same meaning and denition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be
warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these
terms and conditions upon receipt of full payment for the equipment.
Please visit krowne.com/warranty for full terms and conditions regarding
the warranty on your new Royal Series product.
Warranty
krowne.com/faucetflex
Effortlessly configure a faucet,
pre-rinse and much more
Instant spec sheet generation
Instant price generation
Product Description Warranty Period
Royal Series Plumbing 3 Year