Krowne SILVER Series User manual

4” Center Wall Mount Faucet
Installation Manual
10-4 Faucets
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
10-4 Faucets Installation Manual
Installation Instructions
1. Turn off water supply at main source before proceeding with installation.
2. Apply thread sealant tape or pipe joint compound to the ends of each threaded nipple (A).
3. From the front of the sink, insert the threaded nipples into the faucet holes in the sink.
4. From the back of the sink, place the included rubber washer, rosette, and ange nut in
the mounting kit (B) onto the threaded nipples (A) and tighten with a wrench.
5. From the front of the sink, install the spout (C) and tighten properly onto the faucet body (D).
6. From the back of the sink, install the water supply lines and tighten properly.
Note: Before starting installation, if you would like water lines included with your kit, please order
Krowne’s E-Z Install Flexible Water Line Kit with Mounting Hardware (model 21-443L). These kits
do not use thread sealant tape or pipe joint compound. Kits come with 1/2” compression 90°
ttings on one side and 3/8” compression ttings that secure directly onto the supply stops.
These are available in 22”, 24” and 30” lengths.
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
C
D
Sink/Mounting
Surface
A
B
Black Rubber Washer
Rosette Flange Nut

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
10-4 Faucets Installation Manual
Scan to view
aerator options
Parts Guide
Accessories
1
4
2
3
No. Model Description
1 19-220L 6” Swing Spout
1 19-221L 8” Swing Spout
1 19-222L 10” Swing Spout
1 19-223L 12” Swing Spout
1 19-224L 14” Swing Spout
No. Model Description
1 19-225L 16” Swing Spout
1 19-226L 18” Jointed Spout
1 19-227L 3-1/2”W Gooseneck Spout
1 19-228L 6”W Gooseneck Spout
1 19-229L 8-1/2”W Gooseneck Spout
No. Model Description
2 21-300L Silver Series 1/4 Turn Ceramic Valves (full hot & cold valves with handles)
3 21-305 Lever Handle Kit (hot & cold handles only)
4 21-194L Wall Mounting Kit (includes 2 each: nipples, lock nut, rosette, washer)
Model Description
21-312 Wrist Blade Handle Kit (includes hot & cold handles)
21-443L E-Z Install Flexible Water Line Kit
25-150 Thread Sealant Tape
20-302 Replacement Washer Set

10-4 Faucets Installation Manual
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
100 Haul Rd. • Wayne, NJ 07470
krowne.com
This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corpora-
tion (hereinafter “Krowne”) with respect to the product purchased by Purchaser (the “Equipment). By accepting delivery of the
Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All dened terms within the Warranty shall
have the same meaning and denition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be
warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these
terms and conditions upon receipt of full payment for the equipment.
Please visit krowne.com/warranty for full terms and conditions regarding
the warranty on your new Silver Series product.
Warranty
Product Description Warranty Period
Silver Series Plumbing 1 Year
krowne.com/faucetflex
Effortlessly configure a faucet,
pre-rinse and much more
Instant spec sheet generation
Instant price generation