Krowne ROYAL 17-202WL User manual

Single Hole Deck Mount Pre-Rinse
Installation Manual
Krowne • 100 Haul Rd. Wayne, NJ 07470 • [phone] • krowne.com
17-202WL

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
Installation Instructions
1. Turn off water supply at main source before proceeding with installation.
2. From the top of the sink, insert the threaded nipple (A) into the faucet hole in the sink.
3. From the bottom of the sink, place the included black rubber washer, metal washer, and
locknut onto the threaded nipple and tighten with a wrench.
4. The water supply lines (C) have been installed at the factory for ease of installation.
5. To assemble the pre-rinse, remove the riser pipe (B). Thread onto the faucet body (D) and
tighten.
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
Sink/Mounting
Surface
Black Rubber Washer
Metal Washer
Lock Nut
A
B
D
C
Figure 1

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
6. Determine the correct length of the support rod (E) from the wall to the riser pipe (B). Cut the
support rod to size (Figure 2).
7. Determine the position on the wall for the wall bracket brace (F), making sure it is near the
top of the riser pipe (B).
8. Install the wall bracket brace (F) on the wall with the included screws. Press the end of the
support rod (E) into the bracket. Tighten set screw to secure it in place.
9. Install the head of the support rod (G) around the riser pipe with the two supplied screws.
10. The pre-rinse spray head (H), hose (I), and spring (J) have been assembled at the factory.
11. Install the complete assembly onto the top of the riser pipe, making sure you use the small
black washer supplied in the cardboard cylinder in the packaging. Tighten appropriately.
12. Loosen the spray head hook (K) and center it on the riser pipe. Tighten when it is in place.
13. From the bottom of the sink, attach the pre-installed water lines (C) to the main water supply.
E
F
K
B
G
H
I
J
Figure 2

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
1
12
11
3
4
6
10
7
8
16
13
14
15
17
9
2
5

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
Parts Guide
No. Model Description
1 21-308L Cold 1/4 Turn Ceramic Cartridge Valve
2 21-309L Hot 1/4 Turn Ceramic Cartridge Valve
3 21-333L Cold 1/4 Turn Ceramic Cartridge Valve, Less Handle
4 21-334L Hot 1/4 Turn Ceramic Cartridge Valve, Less Handle
5 21-306 Lever Handle Kit (includes hot & cold handles with color indicators)
6 21-202L Single Hole Deck Base
7 21-137 Wall Bracket
8 21-168 Riser (12” Long, 3/8” male thread) (Shown)
8 21-160L Riser (18” Long, 3/8” male thread)
8 21-160-24L Riser (24” Long, 3/8” male thread)
9 21-161L Spring Retainer
10 21-162 24” Spring
11 21-133L 44” Pre-Rinse Hose with Grip
11 21-134L 60” Pre-Rinse Hose with Grip
11 21-135L 72” Pre-Rinse Hose with Grip
11 21-136L 96” Pre-Rinse Hose with Grip
12 21-164L Grip (1/2” NPS Male)
13 21-165 Hook/Screw Assembly
14 21-171 Spray Head Handle
15 21-302L Button Valve
16 21-179L Spray Head Repair Kit - New Style (2007 to present)
17 21-129L 1.15 GPM Spray Head

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
Options and Accessories
Model Description
21-127L 0.65 GPM Spray Head
21-130L Shower Pattern Spray Head
21-131L Angled Pre-Rinse Spray Head
21-132L Pot Filler Spray Head
21-170 Ring
21-311 Wrist Blade Handle Kit (includes hot and cold handles)
21-198L 1/2” x 3/8” Braided Supply Hoses
21-547L Swivel Pre-Rinse Hose Connector
25-150 Thread Sealant Tape
21-170 21-547L 21-311
21-130L21-127L
21-198L
21-131L
25-150
21-132L

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Deck Mount Pre-Rinse Installation Manual
Notes

Warranty
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corpora-
tion (hereinafter “Krowne”) with respect to the product purchased by Purchaser (the “Equipment). By accepting delivery of the
Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All dened terms within the Warranty shall
have the same meaning and denition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be
warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these
terms and conditions upon receipt of full payment for the equipment.
Please visit krowne.com/warranty for full terms and conditions regarding
the warranty on your new Royal Series product.
100 Haul Rd. • Wayne, NJ 07470
krowne.com
Product Description Warranty Period
Royal Series Plumbing 3 Year
krowne.com/faucetflex
Effortlessly configure a faucet,
pre-rinse and much more
Instant spec sheet generation
Instant price generation