KT&C KM2115DKQCN User manual

Standalone Digital Video Recorder
Premium DVR
4, 8, 16 Channel Models
User`s Manual
MADE IN KOREA
KM2115DKQCN
This document contains preliminary information and is subject to change without notice.
DKQ3_K

2
FCC Compliance Statement
Notice to Users
: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part
15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at own expense.
CAUTION
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
ATTENTION
DES CHANGEMENTS OU DES MODIFICATIONS NON EXPRESSEMENT APPROUVEES PAR LE RESPONSABLE DE LA CONFORMITE
POURRAIENT ANNULER L'AUTORISATION DE L'UTILISATEUR A EXPLOITER L'EQUIPEMENT.
The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.
Explanation of Graphical Symbols
Warnings
Installation and servicing should be performed only by qualified and experienced personnel.
Power off the DVR when connecting cameras, audio, or sensor cables.
The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for
the product.
The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for
examination or attempting to fix the unit.
The manufacturer may not be held liable for any issues with the unit if any labels are removed in the product.
This symbol indicates the presence of important operating and maintenance (servicing) instruction in the
literature accompanying the product.
This symbol indicates the presence of non-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Ce symbole indique la présence d’instructions importantes et de maintenances dans le manuel
accompagnant le produit
Ce symbole indique la présence de « haute tension » non-isolé dans le produit qui peut avoir pour
conséquence un risque de la décharge électrique aux personnes.

3
Cautions
This product has free voltages (100V ~ 240V). See installation instructions before connecting to the power supply.
This product uses a Lithium battery.
To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.
Dispose of used batteries according to the manufacturer’s instructions.
This equipment and all communication wirings are intended for indoor use only.
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
WEEE(Waste Electrical and Electronic Equipment)
Important Safeguards
1. Read Instructions
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for
cleaning.
4. Attachments
Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,
electric shock, or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or
adult and serious damage to the equipment.
Wall or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the
manufacturer.
Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the
equipment and cart combination to overturn.
7. Power Sources
This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of
power, please consult to distributor or local power company.
8. Power Cords
Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.
9. Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment
due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
Customers in European Union countries are advised to dispose this product, at the end of its
useful life, as per applicable local laws, regulations and procedures.

4
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
① When the power-supply cord or the plug has been damaged.
② If liquid is spilled or objects have fallen into the equipment.
③ If the equipment has been exposed to rain or water.
④ If the equipment does not operate normally by following the operating instructions, adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the equipment to its normal operation.
⑤ If the equipment has been dropped or damaged the cabinet.
⑥ When the equipment exhibits a distinct change in performance—this indicates a need for service.
14. Replacement Parts
When replacement parts are required, ensure the service technician uses replacement parts specified by the manufacturer
or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to
determine that the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualified service person and should conform to all local codes.
17. Correct Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
ATTENTION
RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT
DISPOSEZ DE BATTERIES EN ACCORS AVEC LES INSTRUCTIONS
18. Operating Temperature
An operating temperature range is specified so that the customer and installer may determine a suitable operating
environment for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment
compatible with the specified operating temperature range.
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the
equipment is not compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical
loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits
might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should
be used when addressing this concern.
23. Grounding (Earthing)
Connection of ground wire is highly recommended to protect the DVR from external electric shock, such as lightening,
electrical surge.
Warning
WARRANTY IS VOID IF SEAL OR LABEL IS REMOVED OR DAMAGED.

5
The List of Configuration
DVR Set
A and E (4CH) Type : 4 / 8 / 16CH
B and E (8, 16CH) Type : 4 / 8 / 16CH
C, D, F, G, H and I Type : 4 / 8 / 16CH
Manual / CMS CD
Remote Controller
Manual
Screws
HDD Brackets
Rack Bracket
(Except A, B and D Type)
Data Cable
Power Cable
Adapter

6
Operation Precautions
Power Off
Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback). Otherwise, it may cause
permanent damage to the equipment. Please click () SETUP>SYSTEM>Shutdown sequentially and then remove the
power after DVR is shut down completely. It is safe to wait for 5 seconds before turning the power on again.
Do not turn DVR off, or plug off the power adapter while External storage device (e.g., USB memory stick, removable
external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that the
power switch is in the “ON” position until data storage is completed. Please be aware that removing the storage device
cause the same damage to the equipment.
Do not turn DVR off, or plug off the power adapter during the format of the hard disk. Otherwise, it may cause permanent
damage to the equipment. Make sure that the power switch is in the “ON” position until the formatting of the disk is
completed.
HDD Installation / Addition / Moving / Replacement / Removal
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may
cause permanent damage to the HDD (DVD-RW).
When wish to power DVR off, please click () SETUP>SYSTEM>Shutdown sequentially and then remove the power after
DVR is shut down completely.
Installation/Addition/Moving/Replacement: Start ‘HDD initialization’ including formatting. Otherwise, DVR would not
recognize the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.
① (Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time).
② (Initialization of system setup) All setup values are restored to original factory default settings.
(SETUP>SYSTEM>Information>Status>Setup>Default).
③ (HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,
each must be formatted, separately. When the format is completed, DVR will auto-reboot.
Removal: Follow the Remove procedure even when a pre-installed hard disk has been removed.
-SETUP>SYSTEM>Admin>Storage>Format, click () ‘Removed’ item under the discrete Format headings of a
corresponding HDD to discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.
Date / Time Change
Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are
not changed.
Make sure to reboot DVR after adjusting the Date/Time.
Also, do not forget to execute SETUP>SYSTEM>Shutdown in sequence before reboot.
Upgrade
Do not upgrade until install a hard disk drive. Make sure that upgrade when the hard disk drive is in proper operation.
Using a Mouse
Left mouse button: have the same function as Enter () on the Front panel of DVR.
Central button (wheel): have the same function as Search key on the Front panel of DVR(display search menu).
Right mouse button: display a number of ‘Function keys’ (please see ‘Input Device and Screen Icons>Using a mouse’ in
this manual).
PLAY / PAUSE Key
Press the PLAY/PAUSE key to one-touch playback on the viewing screen (playback the recorded video from the last one
minute).
Every time pressing the PLAY/PAUSE key during playback mode, it is changed to ‘1X PLAY’ and ‘PAUSE’. The displayed
sign on the screen also changes from to II.
If wish to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the PLAY/PAUSE
key first (please see if the sign II is shown on the screen).
Press the PLAY/PAUSE key to back up. Make sure that the backup is done in ‘PAUSE’ mode.
Camera Title
Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup
menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier.

7
Table of Contents
1. PRODUCT FEATURES............................... 11
1.1 Unpacking....................................................... 11
1.2 Service ............................................................ 11
1.3 System Connection Diagram ........................ 11
2. INSTALLATION .......................................... 21
2.1 Hard disk and DVD-RW Installation ............. 21
2.1.1 SATA Port .................................................... 21
2.1.2 Internal SATA Storage ................................. 21
2.1.3 e-SATA External Storage ............................. 22
2.1.4 HDD Installation ........................................... 22
2.1.5 Maximum HDD Capacity .............................. 22
2.1.6 DVD-RW Installation .................................... 23
2.2 Connector Wiring ........................................... 24
2.2.1 Video-In/Loop Out Connections ................... 24
2.2.2 HD-SDI Camera Input Format...................... 24
2.2.3 HD-SDI Input Signal detection ..................... 24
2.2.4 Monitor Connections .................................... 24
2.2.5 HDMI Connections ....................................... 25
2.2.6 Audio Connections ....................................... 25
2.2.7 TCP/IP(Ethernet) Connections..................... 25
2.2.8 Alarm Connections(TTL) .............................. 25
2.2.9 Master Alarm................................................ 25
2.2.10 Alarm Connections (Relay (Dry Contact)) . 26
2.2.11 RS-485/422 Connections .......................... 26
2.2.12 RS-485 Over Coax Connection ................. 26
2.2.13 USB Connections ...................................... 26
2.2.14 RS-232 Connections ................................. 26
2.2.15 Grounding (Earthing) ................................. 26
2.2.16 Factory Reset Switch................................. 26
2.2.17 Power Supply Connections ....................... 27
2.2.18 Connections Guideline .............................. 27
3. INPUT DEVICE AND SCREEN ICONS ...... 28
3.1 Key and LEDs ................................................. 28
3.2 Camera Select Keys for 16 Channel DVR.... 30
3.3 Front Panel ..................................................... 31
3.4 Using a Remote Controller............................ 31
3.5 Using a Mouse................................................ 32
3.6 Screen Icon..................................................... 32
4. SETUP......................................................... 33
4.1 Login / Logout ................................................ 33
4.2 SYSTEM .......................................................... 34
4.2.1 Information ................................................... 34
4.2.2 Admin ........................................................... 37
4.2.3 Account.........................................................40
4.2.4 System Log...................................................43
4.2.5 Exit................................................................43
4.2.6 Shutdown......................................................43
4.3 DISPLAY ..........................................................44
4.3.1 OSD..............................................................44
4.3.2 Main Monitor .................................................45
4.3.3 Multi Spot......................................................46
4.3.4 Video In / Out................................................47
4.4 DEVICES ..........................................................47
4.4.1 Network.........................................................48
4.4.2 Camera / PTZ ...............................................52
4.4.3 Audio.............................................................53
4.4.4 Alarm In ........................................................53
4.4.5 Alarm Out......................................................54
4.4.6 Serial In.........................................................54
4.5 RECORD ..........................................................55
4.5.1 Setting...........................................................55
4.5.2 Schedule.......................................................59
4.5.3 Pre Alarm......................................................60
4.5.4 Motion Detection...........................................61
4.5.5 Holiday..........................................................62
4.6 LINK..................................................................62
4.6.1 Alarm In ........................................................62
4.6.2 Motion Event.................................................63
4.6.3 Video Loss ....................................................64
4.6.4 Serial In.........................................................64
4.6.5 System Event................................................65
4.6.6 Popup Link....................................................65
5. OPERATION INSTRUCTION ...................... 66
5.1 Viewing ............................................................66
5.1.1 First Image....................................................66
5.1.2 View Format..................................................67
5.1.3 Digital Zoom..................................................67
5.1.4 Freeze Live Image ........................................67
5.1.5 Pan / Tilt Control ...........................................67
5.1.6 System Log...................................................69
5.1.7 Key Lock.......................................................69
5.1.8 Emergency Recording ..................................69
5.2 Search ..............................................................69
5.2.1 Date / Time Search.......................................70
5.2.2 Calendar Search...........................................70
5.2.3 Event Search ................................................71
5.3 Playback ..........................................................72
5.4 One-touch Playback .......................................73
5.5 Digital Zoom in Playback ...............................73
5.6 Archive.............................................................73

8
5.7 Menu Bar......................................................... 74
5.8 Alarm Out Control .......................................... 75
6. CMS PRO .................................................... 77
6.1 CMS Pro Features .......................................... 77
6.1.1 Introduction .................................................. 77
6.1.2 Features ....................................................... 77
6.1.3 System Requirements.................................. 77
6.2 Installation ...................................................... 78
6.2.1 Software Installation..................................... 78
6.2.2 Login ............................................................ 79
6.3 Menu................................................................ 80
6.4 Setup ............................................................... 81
6.4.1 Local Setup - Device .................................... 81
6.4.2 Device Group Setup..................................... 83
6.4.3 Local Setup - Environment ........................... 84
6.4.4 Local Setup - Account .................................. 87
6.4.5 Local Setup – E-map.................................... 88
6.4.6 Remote Device Setup .................................. 90
6.4.7 Change Password........................................ 91
6.4.8 Help.............................................................. 91
6.5 View ................................................................. 91
6.5.1 Server List .................................................... 91
6.5.2 Remote Device System Log......................... 92
6.5.3 Remote Device Event Log............................ 92
6.5.4 CMS System Log ......................................... 93
6.5.5 Health Check................................................ 94
6.5.6 Show All Windows........................................ 95
6.6 Application...................................................... 96
6.6.1 Search.......................................................... 96
6.6.2 Exit ............................................................... 96
6.7 Live (Live Video Monitoring System)........... 97
6.7.1 Overview ...................................................... 97
6.7.2 Live Monitor Menu........................................ 97
6.7.3 Screen Layout Control................................ 104
6.7.4 Change Division Display ............................ 104
6.7.5 Sequencing ................................................ 105
6.7.6 Audio Volume Control ................................ 105
6.8 Search ........................................................... 106
6.8.1 Overview .................................................... 106
6.8.2 Time Bar Search ........................................ 106
6.8.3 Event Search.............................................. 108
6.8.4 POS/ATM Search....................................... 108
6.8.5 Thumbnail Search ...................................... 109
6.8.6 Smart Search ............................................. 109
6.9 E-Map ............................................................ 110
6.9.1 Overview .................................................... 110
6.9.2 Controls...................................................... 110
6.9.3 E-map Camera – Instant Playback............. 110
6.9.4 Alarm In/Out Control................................... 111
6.9.5 Audio.......................................................... 111
6.10 Uninstalling CMS Pro ................................. 112
7. ICMS VIEWER........................................... 114
7.1 System Recommendations..........................114
7.2 Program Installation .....................................114
7.3 Login ..............................................................115
7.4 Watch Mode...................................................116
7.4.1 Log-in Screen .............................................116
7.4.2 Local Setting ...............................................116
7.5 Live View........................................................120
7.5.1 Connection..................................................120
7.5.2 Display Mode..............................................120
7.5.3 Health Check ..............................................121
7.5.4 PTZ Control ................................................122
7.5.5 System Log.................................................123
7.6 Search Mode .................................................123
7.6.1 Date/Time Search.......................................123
7.6.2 Event Search ..............................................124
7.6.3 POS/ATM....................................................125
7.7 Disconnection ...............................................126
7.8 Uninstall.........................................................127
8. XCMS VIEWER ......................................... 129
8.1 Program Installation .....................................129
8.1.1 System Recommendations .........................129
8.1.2 Program Installation Method .......................129
8.2 Login ..............................................................130
8.3 Watch Mode...................................................130
8.3.1 Login Screen...............................................130
8.3.2 Local Setting ...............................................131
8.3.3 Live .............................................................134
8.4 Search Mode .................................................137
8.4.1 Date/Time Search.......................................137
8.4.2 Event Search ..............................................138
8.4.3 POS/ATM....................................................139
8.5 Disconnection ...............................................140
8.6 Uninstall.........................................................141
9. CMS WEB CLIENT PRO...........................143
9.1 System Requirements ..................................143
9.2 Setup and Login............................................143
9.3 Live Display...................................................144
9.4 Search Screen...............................................145
9.5 PTZ Control ...................................................146
9.6 Capture ..........................................................147
10. CMS MOBILE VIEWER............................. 149
10.1 iPhone Mobile ..............................................149
10.1.1 System Requirements..............................149
10.1.2 Installation................................................149

9
10.1.3 Site Registration ...................................... 151
10.1.4 Connection .............................................. 152
10.1.5 Live View (Portrait View) ......................... 152
10.1.6 Live View (Landscape View) ................... 153
10.1.7 PTZ Control ............................................. 153
10.1.8 Search ..................................................... 154
10.1.9 Snapshot Gallery..................................... 155
10.1.10 Setting ................................................... 156
10.1.11 Uninstallation ......................................... 156
10.2 iPad Mobile.................................................. 158
10.2.1 System Requirements ............................. 158
10.2.2 Installation ............................................... 158
10.2.3 Site Registration ...................................... 160
10.2.4 Connection .............................................. 160
10.2.5 Live View (Portrait View) ......................... 161
10.2.6 Live View (Landscape View) ................... 162
10.2.7 PTZ Control ............................................. 162
10.2.8 Search ..................................................... 163
10.2.9 Snapshot Gallery..................................... 164
10.2.10 Setting ................................................... 165
10.2.11 Uninstallation ......................................... 165
10.3 Android Phone (mViewer Pro)................... 166
10.3.1 System Requirements ............................. 166
10.3.2 Installation ............................................... 166
10.3.3 Site Registration ...................................... 167
10.3.4 Connection .............................................. 168
10.3.5 Live View (Portrait View) ......................... 168
10.3.6 Live view (Landscape View) .................... 169
10.3.7 PTZ control.............................................. 170
10.3.8 Alarm Out Control.................................... 171
10.3.9 Search ..................................................... 171
10.3.10 Snapshot Gallery ................................... 172
10.3.11 Setting ................................................... 173
10.3.12 Uninstallation ......................................... 173
10.4 Android Phone ............................................ 174
10.4.1 System Requirements ............................. 174
10.4.2 Installation ............................................... 174
10.4.3 Site Registration ...................................... 175
10.4.4 Connection .............................................. 176
10.4.5 Search ..................................................... 177
10.4.6 Audio ....................................................... 177
10.4.7 PTZ control.............................................. 178
10.4.8 Information .............................................. 178
10.4.9 Disconnection.......................................... 179
10.4.10 Uninstall................................................. 179
10.5 Blackberry Mobile....................................... 180
10.5.1 System Requirements ............................. 180
10.5.2 Installation ............................................... 180
10.5.3 Site Registration ...................................... 180
10.5.4 Connection .............................................. 181
10.5.5 PTZ Control ............................................. 182
10.5.6 Disconnection.......................................... 183
10.5.7 Uninstallation........................................... 183
11. KEYBOARD CONTROLLER ....................185
11.1 Connection...................................................185
11.1.1 Configuration Diagram .............................185
11.1.2 USB Connection ......................................185
11.2 Keyboard Setup in DVR ..............................185
11.3 Keyboard Configuration .............................186
11.4 Setup.............................................................187
11.4.1 DVR Control Mode ...................................187
11.4.2 Speed Dome Setup..................................188
11.4.3 Joystick Calibration ..................................188
11.5 Operation......................................................188
11.5.1 DVR/SPD Mode Conversion ....................188
11.5.2 DVR Control Mode...................................188
11.5.3 SPD Control Mode (Speed Dome)...........190
12. SERIAL IN (POS) ...................................... 193
12.1 Usage of Serial-In Function........................193
12.2 Connection Method.....................................193
12.3 Connection Diagram ...................................193
12.4 Link ...............................................................195
12.4.1 Link Setup................................................195
12.4.2 Schedule Setup........................................196
12.5 Setup.............................................................196
12.5.1 Title ..........................................................196
12.5.2 Port Setting ..............................................197
12.5.3 OSD Display ............................................197
12.5.4 Pattern Setting .........................................197
12.6 Search...........................................................200
13. HD-SDI VIDEO SIGNAL ACCESSORIES. 203
13.1 HSC1100 .......................................................203
13.1.1 Introduction ..............................................203
13.1.2 Features...................................................203
13.1.3 Technical Specification ............................203
13.1.4 Unpacking................................................203
13.1.5 Service.....................................................203
13.1.6 System Dimension Diagram.....................203
13.1.7 System Connection Diagram ...................204
13.1.8 Cable........................................................204
13.1.9 Display .....................................................204
13.2 HSC1200 .......................................................205
13.2.1 Introduction ..............................................205
13.2.2 Features...................................................205
13.2.3 Technical Specification ............................205
13.2.4 Unpacking................................................205
13.2.5 Service.....................................................205
13.2.6 System Dimension Diagram.....................205
13.2.7 Connector Wiring .....................................206
13.2.8 Cable........................................................206
13.2.9 Operation Key and Screen Display Information 206

10
13.3 HSC2110 ...................................................... 207
13.3.1 Introduction.............................................. 207
13.3.2 Features .................................................. 207
13.3.3 Technical Specification.............................. 207
13.3.4 Unpacking ............................................... 207
13.3.5 Service .................................................... 207
13.3.6 System Dimension Diagram .................... 207
13.3.7 Connector Wiring..................................... 208
13.3.8 PTZ Control ............................................. 208
13.3.9 Cable....................................................... 208
13.3.10 Display................................................... 209
13.4 HSC2410 ...................................................... 209
13.4.1 Introduction.............................................. 209
13.4.2 Features .................................................. 209
13.4.3 Technical Specification............................ 209
13.4.4 Unpacking ............................................... 209
13.4.5 Service .................................................... 209
13.4.6 System Dimension Diagram .................... 210
13.4.7 Connector Wiring..................................... 210
13.4.8 Cable....................................................... 210
13.4.9 Display..................................................... 211
13.5 HSR1110 ...................................................... 211
13.5.1 Introduction.............................................. 211
13.5.2 Features .................................................. 211
13.5.3 Technical Specification............................ 211
13.5.4 Unpacking ............................................... 211
13.5.5 Service .................................................... 211
13.5.6 System Dimension Diagram .................... 212
13.5.7 Connector Wiring..................................... 212
13.5.8 Cable....................................................... 212
13.5.9 Display..................................................... 212
13.6 HSR1440 ...................................................... 213
13.6.1 Introduction.............................................. 213
13.6.2 Features .................................................. 213
13.6.3 Technical Specification............................ 213
13.6.4 Unpacking ............................................... 213
13.6.5 Service .................................................... 213
13.6.6 System Dimension Diagram .................... 213
13.6.7 Connector Wiring..................................... 214
13.6.8 Cable....................................................... 214
13.6.9 Display..................................................... 214
13.7 HQS1004 ...................................................... 215
13.7.1 Introduction.............................................. 215
13.7.2 Features .................................................. 215
13.7.3 Technical Specification............................ 215
13.7.4 Unpacking ............................................... 215
13.7.5 Service .................................................... 215
13.7.6 System Dimension Diagram .................... 215
13.7.7 Connector Wiring..................................... 216
13.7.8 Cable....................................................... 216
13.7.9 Display..................................................... 216
13.8 HFO1100 & HFO1200...................................217
13.8.1 Introduction ..............................................217
13.8.2 Features...................................................217
13.8.3 Technical Specification ............................217
13.8.4 Unpacking................................................217
13.8.5 Service.....................................................217
13.8.6 System Dimension Diagram.....................218
13.8.7 Connector Wiring .....................................218
13.8.8 Cable........................................................219
13.8.9 Display .....................................................219

11
1. Product Features
1.1 Unpacking
This equipment is an electronic appliance, so it should be handled with special care.
After unpacking, please check if all the following items are included.
-DVR Main body
- A, B and E(4CH) Type : Power Supply Adapter (DC 12V, 5A) and Power Supply Cable
- C, D, E(8, 16CH), G, H and I Type : Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable
- F Type : Power Supply Adapter (DC 12V, 8.33A) and Power Supply Cable
-Remote Control With 2 AAA batteries
-Installation CD (CMS Software & User’s Manual)
1.2 Service
If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.
Warning
WARRANTY IS VOID IF SEAL OR LABEL IS REMOVED OR DAMAGED.
1.3 System Connection Diagram
A T
yp
e
–
4 / 8 / 16 channel Series DVR

12
B T
yp
e
–
4 / 8 / 16 channel Series DVR

13
C T
yp
e
–
4 / 8 / 16 channel Series DVR

14
D T
yp
e
–
4 / 8 / 16 channel Series DVR

15
E
(
4CH
)
T
yp
e
–
4 channel Series HD-SDI DVR

16
E
(
8, 16CH
)
T
yp
e
–
8 / 16 channel Series HD-SDI DVR

17
F T
yp
e
–
4
/
8
/
16 channel Series HD-SDI DVR

18
G T
yp
e
–
4 channel Series HD-SDI DVR

19
H T
yp
e
–
4 channel Series HD-SDI DVR

20
I T
yp
e
–
4 + 4 channel Series H
y
brid DVR