[FILE] BUTTON: The Menu button contains several functions; preset saving,
and shortcuts to the user manual and Kuassa website.
PRESET SELECTOR: Select from available Presets, press left-right buttons or select
from drop down menu.
A-B COMPARE: Compares two different settings of the effect.
COPY A to B: Copies settings from the “A” state to the “B” state or vise versa.
DELAY SETTING: SYNC: When set to On, delay time follows the host’s tempo.
DELAY SETTING: PONG: When set to On, enables the ping-pong mode.
The repeats alternate between left and right channel.
MODULATION SETTING: STEREO: When set to On, LFO modulates left channel
in the opposite direction to right channel
MODULATION SETTING: SYNC: When set to On, oscillation follows the host’s tempo.
DELAY: Sets the delay time in ms. When Sync is enabled,
it follows the host’s tempo in BPM.
3
2
1
4
5
6
7
8
9
FEEDBACK: Sets the amount of signal that is sent back to the effect unit.
WET: Controls the level of delayed signal.
DRY: Control the level of original signal.
TYPE SELECTOR: Select from five types of delay types within the device,
each comes with different characteristic, and tone.
RATE: Controls the speed of modulation. When Sync is enabled,
it follows the host’s tempo in BPM.
DEPTH: Controls the height or amplitude of the modulation.
EFEKTOR LOGO: Click to show the About Box.
LIGHT INDICATOR: Light blinking follows the delay time.
BYPASS: Turns the effect unit completely On or Bypass.
12
11
10
13
14
15
16
17
18
1 2
43
17
6
587
5
13
9 1211
18
1514
16
10
