Kuat PISTON User manual
eBIKE RAMP
USER GUIDE
PISTONTM
INCLUDED
PISTON eBIKE RAMP
eBike Ramp Operation
1Loosen wing knobs and expand tray to desired length.
2Re-tighten wing knobs.
1
2
1
Installation
1Tap the OneTap Lever to
release tire arm.
The Piston OneTap system allows users to rotate tire arms into a
negative position for the installation of your eBike Ramp.
2Pull arm down into
negative position.
Do not hold OneTap Lever while pulling arm into position.
TM
TM
TM
6
7
5Remove eBike Ramp.
3To install eBike Ramp, simply rest ramp hooks onto
Piston tire arm joints.
4Load bike and
secure with opposite
tire cradle.
6Tap each OneTap Lever to release
ratchet tension.
7Pull tire arm back up into position
and secure against rear tire.
Do not hold OneTap Lever
while pulling arm into
position.
TM
TM
eBIKE RAMP
PISTONTM
Warnings
Maximum Bike Weight
65 lb
29.5 kg
kuatracks.com
[email protected] 1.877.822.5828
WARNINGS
• Follow instructions for proper assembly, installation and use.
• Check tightness of all bolts and screws periodically.
If you have questions or problems, please contact Küat Racks directly by calling toll free
ADVERTENCIAS
• Siga las instrucciones para un montaje, instalación y uso adecuados.
• Compruebe periódicamente la estanqueidad de todos los pernos y tornillos.
AVERTISSEMENTS
• Suivez les instructions pour un assemblage, une installation et une utilisation appropriés.
• Vérifiez régulièrement le serrage de tous les boulons et vis.
Table of contents
