Kuchef LMG800 User manual

Model Number LMG800
Meat Grinder
INSTRUCTION MANUAL
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
Document 1, Version 1
AUS

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 1
Congratulations on choosing to buy a Kuchef®product. All products
brought to you by Kuchef®are manufactured to the highest standards
of performance and safety and as a part of our philosophy of customer
service are backed by our comprehensive 1 year warranty. We hope
you enjoy using your purchase for many years to come.
Welcome

Contents
01 Welcome
03 Warranty Details
04 Intended Proper Use
05 General Information and Safety Instructions
09 Features and Product Contents
11 Instructions
15 Cleaning and Maintenance Instructions
16 Disposal Information
17 Troubleshooting
18 Repair and Refurbished Goods or Parts Notice
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 2

Meat Grinder
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use and
care, will be repaired, replaced or refunded at our discretion. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS YEAR WARRANTY
1

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 4
Intended Proper Use
The Kuchef®Meat Grinder is intended for the grinding of meat to make
minced meat, sausages, kibbeh and other delectable meat dishes.
The three metal mincing plates allow for medium, fine or coarse
mincing to suit your preference.
Only use the appliance as described in the instruction manual. Any
other use will be deemed as not in accordance with the instructions
and may lead to damage of property and/or persons.
The manufacturer accepts no liability for damage caused by the use of
the meat grinder not in accordance with the instructions.
NOTE: This appliance is intended for domestic use only. It should
NOT be used for commercial purposes. Such use may damage the
product and will invalidate your warranty.

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 5
O\EHIRUHĺUVWXVHHYHQ
UQV ĺUH
SOHWHGZDUUDQW\FDUG
Signal Terms
!
tIndoor domestic use only
!
"
RXWGRRUVZKH
# $
tIntended purpose
! "
Meat Grinder Safety Warnings
s
%
Y
VLFDOVHQVRU\RUPHQWDOFDSDELOLWLHV
RZOHGJHLIWKH\KDYH EHHQJLYHQVXSHUYLVLR
&
YROYHG
s
'
s
'
UY
s
s
WKHĺUVWWLPHDQGDIWHU
General Information and Safety Instructions
WARNING - 7KLVVLJQDOWHUPLQGLFDWHVDPRGHUDWHULVNZKLFK
LIQRWDYRLGHGPD\UHVXOWLQGHDWKRUVHYHUHLQMXU\
CAUTION - 7KLVVLJQDOWHUPLQGLFDWHVDORZULVNZKLFKLIQRW
DYRLGHGPD\UHVXOWLQPLQRURUPRGHUDWHLQMXU\
NOTE -

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 6
s
( ) * + , - . / / 0 1 2 3 4 5 6 - 5 7 8 7 9 , 5 : 6 * 8 . - * ; , 4 , / 0 7 2 , 5 ; 1 * + , 8 7 < . ) 7 2 * . 4 , 4 :
6 * - - , 4 = 6 2 , 7 9 , < * 3 4 - 6 8 6 0 7 4 0 1 > .
DOLĺHG
/ , 4 - 3 < - 6 < 3 4 5 , 4 * 3 7 = 3 6 5 7 + 7 ? 7 4 5 @
tWARNING: Never operate the appliance continuously for more
than 3 minutes at 800W. Extensive use could cause this appliance
to overheat and shorten the life span.
s
A B 6 * 2 + 3 ) ) 7 < 5 . < / 0 . 9 * + , 7 / / 0 6 7 < 2 , ) 4 3 8 * + , 3 . * 0 , * B + , < 6 * 6 - < 3 * 6 < . - ,
7 < 5 7 0 B 7 1 - 7 0 0 3 B * 3 2 3 8 / 0 , * , 0 1 2 3 3 0 5 3 B < ; , ) 3 4 , 2 0 , 7 < 6 < 9 @
sAccessories:
C 3 < 3 * . - , 7 < 1 7 2 2 , - - 3 4 6 , - B 6 * + * + 6 - 7 / / 0 6 7 < 2 , * + 7 * 7 4 ,
< 3 * - . / / 0 6 , 5 3 4 -
SHFLĺFDOO\
4 , 2 3 8 8 , < 5 , 5 @
s
D + , 2 E 6 ) * + , = 3 0 * 7 9 , 6 < 5 6 2 7 * , 5 3 < * + , 7 / / 0 6 7 < 2 , 2 3 4 4 , - / 3 < 5 - * 3 * + ,
0 3 2 7 0 8 7 6 < - = 3 0 * 7 9 , ; , ) 3 4 , 1 3 . 2 3 < < , 2 * * + , 7 / / 0 6 7 < 2 , @
s
F , = , 4 . - , 7 < 1 7 2 2 , - - 3 4 6 , - 3 4 / 7 4 * - < 3 * 6 < 2 0 . 5 , 5 B 6 * + * + , 7 / / 0 6 7 < 2 , @
s
G + , 8 7 < . ) 7 2 * . 4 , 4 6 - < 3 * 4 , - / 3 < - 6 ; 0 , ) 3 4 7 < 1 , = , < * . 7 0 5 7 8 7 9 , -
2 7 . - , 5 ; 1 6 8 / 4 3 / , 4 3 4 ) 7 . 0 * 1 . - , @
tCAUTION: Never use your finger or an object to push
ingredients down the feed tube while the appliance is running.
Only the pusher is to be used for this purpose.
s
G + , . < 6 * + 7 - < 3 . - , 4 H - , 4 = 6 2 , 7 ; 0 , / 7 4 * - 2 3 < * 7 6 < , 5 B 6 * + 6 < @ C 3 < 3 *
7 * * , 8 / * * 3 4 , / 7 6 4 : 5 6 - 7 - - , 8 ; 0 , 3 4 8 3 5 6 ) 1 * + , 7 / / 0 6 7 < 2 , @
tWARNING: Modifications to the meat grinder by the user/s
may cause damage to property or persons and will be deemed as
not in accordance with the instruction manual and no liability for
damage will be accepted by the manufacturer.
s
C 3 < 3 * . - , * + 6 - 7 / / 0 6 7 < 2 , B 6 * + 7 < , I * , < - 6 3 < 2 3 4 5 . < 0 , - - * + , 2 3 4 5 + 7 -
; , , < 2 + , 2 E , 5 7 < 5 * , - * , 5 ; 1
DTXDOLĺHGWHFKQLFLD
< 3 4 - , 4 = 6 2 , / , 4 - 3 < @
s
C 3 < 3 * . - , 2 + , 8 6 2 7 0 : - * , , 0 B 3 3 0 3 4 7 ; 4 7 - 6 = , 2 0 , 7 < , 4 - * 3 2 0 , 7 < * + ,
3 . * - 6 5 , 3 ) * + , 8 , 7 * 9 4 6 < 5 , 4 7 - * + , - , 2 + , 8 6 2 7 0 - 8 7 1 5 7 8 7 9 , * + ,
7 / / 0 6 7 < 2 , @
s
C 3 < 3 * 7 0 0 3 B 2 + 6 0 5 4 , < * 3 / 0 7 1 B 6 * + * + , 5 , = 6 2 , 3 4 * + , / 7 2 E 6 < 9
ĺO
8 @
Danger of suffocation.
D 3 < * 7 6 < - - 8 7 0 0 / 7 4 * - B + 6 2 + 8 7 1 ; , 7 2 + 3 E 6 < 9 + 7 ? 7 4 5 @ J < - . 4 , * + 7 *
2 + 6 0 5 4 , < 5 3 < 3 * 4 , 8 3 = , - 8 7 0 0 / 7 4 * - ) 4 3 8 * + , 5 , = 6 2 , 3 4 * 7 E , * + , 8
3 ) ) 3 ) * + , 5 , = 6 2 , K , @ 9 @ 2 3 < * 4 3 0 E < 3 ; - 3 4 / 0 . 9 7 5 7 / * , 4 - L @ F 3 * - . 6 * 7 ; 0 , ) 3 4
2 + 6 0 5 4 , < . < 5 , 4 7 9 , M @
s
A B 6 * 2 + 3 ) ) * + , 7 / / 0 6 7 < 2 , 7 < 5 5 6 - 2 3 < < , 2 * ) 4 3 8 * + , - . / / 0 1 ; , ) 3 4 ,
2 + 7 < 9 6 < 9 7 2 2 , - - 3 4 6 , - 3 4 7 / / 4 3 7 2 + 6 < 9 / 7 4 * - * + 7 * 8 3 = , 6 < . - , @

t/FWFSMFBWFUIFBQQMJBODFVOBUUFOEFEXIJMFJOVTFt%POPUBUUFNQUUPHSJOECPOFTOVUTPSPUIFSIBSEJUFNTtWARNING: Never reach into the cutter housing. Always use
the pusher.
tDo not place the appliance on or near a flammable or hot object.
t"MXBZTTXJUDIPGGUIFBQQMJBODFCFGPSFDPOOFDUJOHUIFQMVHXJUIUIFsocket or disconnecting the plug from the socket. Remove by grasping
the plug – do not pull on the cord.
t"TIPSUQPXFSTVQQMZDPSEJTQSPWJEFEUPSFEVDFUIFSJTLPGCFDPNJOHentangled in or tripping over a long cord.
t%POPUBMMPXUIFQPXFSDPSEPGUIFBQQMJBODFUPIBOHPWFSUIFFEHFof a table or touch any hot surfaces.
t4PNFBQQMJBODFTBSFATFBMFEVTJOHUBNQFSQSPPGTDSFXTUPBWPJEtampering/maintenance by unskilled or unqualified person and also
for safety reasons.
t%POPUPQFSBUFBOZFMFDUSJDBMBQQMJBODFJGUIFQPXFSDPSEJTEBNBHFEor after the appliance has been dropped or damaged in any manner.
If damage is suspected, contact after sales support.
t%POPUJOTFSUBOZPCKFDUTJOUPUIFNFBUHSJOEFStCAUTION: When operating the appliance, be cautious of loose
DMPUIJOHKFXFMMFSZPSMPOHIBJSBTUIJTDBOCFDPNFFOUBOHMFEJOmoving parts which can snag and pull.
t%POPUPQFSBUFUIFVOJUOFBSMJRVJETGPSFYBNQMFLJUDIFOTJOLXBUFSbasins or taps).
t%POPUVTFZPVSBQQMJBODFJGUIFDPSEPSBQQMJBODFIBTCFFOdamaged or if it is not working properly. Contact after sales support.
t/FWFSDPWFSUIFBQQMJBODFXIFOJUJTJOPQFSBUJPOt$"65*0/.PEJmDBUJPOTUPUIFGBOCZUIFVTFSTNBZDBVTFdamage to property or persons and will be deemed as not in
accordance with the instruction manual and no liability for
damage will be accepted by the manufacturer.
tCAUTION: The blade is sharp. Handle with care.
t5IJTBQQMJBODFJTFRVJQQFEXJUIBUIFSNPTUBUTZTUFN5IJTTZTUFNXJMMautomatically cut off the power supply to the appliance in case of
overheating.
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 7

tCAUTION: In order to avoid a hazardous situation, this
appliance must never be connected to an external timer. Press
the button “REV” when the appliance is running normally, the
appliance will stop working temporarily, it will start again when
the button is released.
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 8
CAUTION:
t5PSFEVDFUIFSJTLPGFMFDUSJDTIPDLEPOPUJNNFSTFPSexpose the product, flexible cord or plug to rain, moisture or
any liquid.
t%POPUVTFUIFQSPEVDUOFBSCBUITCBTJOTPSPUIFSWFTTFMTcontaining water or other liquids or when standing in or on
damp or wet surfaces.
t*OUIFFWFOUXIFSFUIFBQQMJBODFJTESPQQFEJOUPXBUFSUVSOoff the power at the power outlet and remove plug
immediately. DO NOT REACH INTO THE WATER TO
RETRIEVE IT.
tIt is important to note that the appliance will have to be
JOTQFDUFECZBRVBMJmFEUFDIOJDJBOCFGPSFVTJOHJUBHBJO

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 9
Features and Product Contents
1. Tray
2. Cutter Housing
3. Release Button
4DSFX3JOH5. Motor Unit
0/0''CVUUPO7. Temporary stop/reverse
button (REV)
*OEJDBUPS-JHIU$PSE1MVH4UPSBHF/PUF5IFUPPMTBOEBDDFTTPSJFTBSFQJDUVSFEBOEexplained on the following pages.
1
6
7
8
2
3
4
5
9

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 10
10. Coarse Mincing Disc
11. Medium Mincing Disc
12. Fine Mincing Disc
13. Worm Shaft
14. Separator
15. Sausage Horn
16. Cutter Blade
17. Pusher
18. Kibbeh Shaper
19. Former
20. Plastic Linker (Spare part)
10
17
18
13
14
19
15
11
12
16
20

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 11
Instructions
Before using for the first time
%HIRUHXVLQJWKHPHDWJULQGHUIRUWKHĺUVWWLPHUHDGDOOLQVWUXFWLRQV
FDUHIXOO\DQGNHHSWKHPIRUIXWXUHUHIHUHQFH
s (QVXUHWRUHPRYHDOOSDFNDJLQJSODVWLFVIURPWKHDSSOLDQFH,IDQ\
SDUWVDUHPLVVLQJSOHDVHFRQWDFW$IWHU6DOHV6XSSRUW
s :DVKDOOSDUWVEHIRUHXVLQJ
s 'U\WKRURXJKO\EHIRUHFRQQHFWLQJWRWKHZDOORXWOHW
s 5HPRYHWKHFRUGDQGSOXJIURPXQGHUQHDWKWKHXQLWZKHUHLWLV
VWRUHG
WARNING: Always switch the appliance off before detaching
and installing any accessory.
2QFHDOOSDUWVKDYHEHHQDVVHPEOHGDVSHULQVWUXFWLRQVEHORZSOXJ
WKHDSSOLDQFHLQWRDZDOOVRFNHWDQGWXUQWKHSRZHURQDWWKHZDOO7KH
LQGLFDWRUOLJKWZLOOWKHQLOOXPLQDWH
s 7RWXUQWKHDSSOLDQFHRQSUHVVWKH2Q2IIEXWWRQ
s 7RVWRSWKHSURFHVVSUHVVWKH2Q2IIEXWWRQWRSDXVHWKH
SURFHVVSUHVVDQGKROGWKH5(9EXWWRQ
Assembling and using the mincer
,QVHUWWKHZRUPVKDIWLQWRWKHFXWWHUKRXVLQJWKHSODVWLFHQG
ĺUVW3ODFHWKHFXWWHUXQLWRQWRWKHZRUPVKDIW7KHFXWWLQJ
HGJHVVKRXOGEHDWWKHIURQW)LJ3ODFHRQHRIWKHPLQFLQJGLVFV
GHSHQGLQJRQWKHFRQVLWHQF\RIWKHJULQGUHTXLUHG
RQWRWKHZRUPVKDIW7KHQSODFHWKHVFUHZULQJRYHUWKH
VHOHFWHGPLQFLQJGLVFRUDQGVFUHZWRVHFXUH
Fig.1
4
12
11
10 16 13 2

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 12
NOTE: Make sure to align the mincing disc
groove with the mark at the top of the
cutter housing opening (Fig.2).
2.
N O O P Q R O R S Q T U V W S O S X Q Y O O S Z R T Y [ \ ] ^ _ ` a P [
P [ [ S U b W S X \ ] [ O S V c d O T O R S U T O T Z Y ] \ O _ e a
O Y Z ] \ ] ^ P ] O \ f Q W T Q g h \ [ S Y ] O \ W W T Q g S X \ ] O T
V W P Q S _ i \ ^ j k j a j
k j l W P Q S O R S O Z P m _ c a T ] O R S Y V Z \ ^ R O V P Z O T n O R S
Q Y O O S Z R T Y [ \ ] ^ _ ` a _ i \ ^ j o a j
o j p S U T q S O R S Q T Z X P ] X V W Y ^ _ r a n Z T U
Y ] X S Z ] S P O R O R S P V V W \ P ] Q S P ] X \ ] [ S Z O O R S
V W Y ^ \ ] O T P h P W W [ T Q g S O P ] X O Y Z ] T ] P O O R S
h P W W [ T Q g S O j
Making minced meat
s
s Y O O R S U S P O \ ] O T c t Q U W T ] ^ d ` Q U O R \ Q g
[ O Z \ V [ j
s
p S U T q S P ] m b T ] S [ d V \ S Q S [ T n ^ Z \ [ O W S P ] X
[ \ ] S h P [ U Y Q R P [ V T [ [ \ b W S j
Never use
frozen meat.
s
l Y O O R S U S P O \ ] O R S O Z P m _ c a j u [ S O R S V Y [ R S Z
_ c v a O T ^ S ] O W m V Y [ R O R S U S P O \ ] O T O R S Q Y O O S Z
R T Y [ \ ] ^ _ ` a _ i \ ^ j e a j
Fig.2
Fig.3
Fig.4
Fig.5

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 13
w x y z {
w x y z |
Assembling and using the sausage attachment
} ~ }
ĺUVWMake sure the separator groove aligns correctly with mark
at the top of the cutter housing opening.
}
} }
} ~
~ ~
~
}
~ ¡ ~
~
¢ }
~ £ ~
Making Sausages
s
} ¤ ~ ¥
} ~
} ¡ ~
} ~
¦ § ¨ © ª
4 15 14 13 2
~ « ¬
~

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 14
Assembling and using the kibbeh attachment
® ¯ ° ± ² ³ ´ µ µ ¶ ³ · ¸ ´ ¹ ² ¶ º » µ ¼ ® ½ ¾ ¿ ± µ ¸ µ ¶ ³ À Á µ µ ³ ´ ¶ ¸ Á ² ¿ ± Â ¼ Ã ¾ Ä µ ¶ ³ Å Æ º ² µ ¿ À ³ ± Ç
ĺUVW3ODFHWKHNLEEHKVKDSHURQWKHZRUPVKDIW3ODF
³ µ ¶ ³
IRUPHURQWKHNLEEHKVKDSHUDQGVFUHZULQJRQWKH
FXWWHUKRXVLQJDQGVFUHZWRVHFXUH)LJ0DNHVXUHWKH
QRWKFHVRIWKHVHSDUDWRUĺWRQWRWKHSURMHFWLRQVRIWKHPLQFHU
¶ ³ º Ç ¯
à ¯ È µ µ º À ¶ µ ¶ ³ À ¸ ¹ Å Æ ³ µ ³ Ç À Á µ µ ³ ´ ¶ ¸ Á ² ¿ ±  ¼ à ¾
DVDVVHPEOHGLQVWHSWRWKHPRWRUXQLW
WXUQLQJDQWLFORFNZLVHXQWLOORFNHGLQWR
Å Æ º À ³ ¼ É ¿ Â ¯ ® Ê ¾ ¯
½ ¯
3ODFHWKHWUD\RQWKHXSULJKWSDUWRIWKH
À Á µ µ ³ ´ ¶ ¸ Á ² ¿ ± Â ¼ Ã ¾ ¼ É ¿ Â ¯ ® ® ¾ ¯
Making Kibbeh
s .LEEHKLVDWUDGLWLRQDO0LGGOH(DVWHUQGLVK
PDGHSULPDULO\RIODPEDQGEXOJXUZKHDW
)HHGWKHPL[WXUHWKURXJKWKHNLEEHK
VKDSHUXVLQJWKHSXVKHUDQGFXW
LQWRVKRUWOHQJWKV7KLVFDQWKHQEHVWXIIHG
· ¿ µ ¶ º ¹ ¿ ± À ³ Ç ¹ ³ º µ ¹ ¿ Ë µ Á ´ ³ Ä µ ¶ ³ ± ³ ± Ç ²
Å ¿ ± À ¶ ³ Ç µ ¸ Â ³ µ ¶ ³ ´ º ± Ç µ ¶ ³ ± Ç ³ ³ Å » ´ ¿ ³ Ç ¯
Ì Í Î Ï Ð
Ñ Ò Ó Ô Õ Ö
Ñ Ò Ó Ô Õ Õ
4 2
13
18
19
5HPRYHWKHFR
´ Ç º ± Ç Å Æ Á Â ¼ × ¾ » ´ ¸ ¹ Á ± Ç ³ ´ ± ³ º µ ¶
µ ¶ ³ º Å Å Æ ¿ º ± À ³ º ± Ç ¿ ± ² ³ ´ µ µ ¶ ³ Å Æ Á Â ¿ ± µ ¸ º · º Æ Æ
VRFNHWDQGWX
´
QRQDWWKHZDOOVRFNHW

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 15
Cleaning and Maintenance Instructions
Ø Ù Ú Ú Ù Û Ü Ý Þ ß Þ à á ß Ü â ã ä Ü à Ù á ß Ü Ù Þ á ß ã â Þ å Ù ã â æ ã ä Ý Þ ç
è
Þ é Ü ê â à á ë Þ â à ß
ä Ú Þ é á Þ ë é á ë ì é à á Ü é à á Þ ë ä Ù â â Þ ä Ü Ú å í
s
è
Þ é Ü Ú Þ ç Ü î Þ Ý à á ë à á Ü Ý Þ ä ã Ü Ü Þ â Ý Ù ã ß à á ï ì é å î Þ â Þ ì Ù ð Þ ë ç â Ù ì Ü Ý Þ
à á ß à ë Þ Ù ç Ü Ý Þ é ñ ñ Ú à é á ä Þ î å ñ é ß ß à á ï é ß Ú à ä Þ Ù ç î â Þ é ë Ü Ý â Ù ã ï Ý Ü Ý Þ ä ã Ü Ü Þ â
Ý Ù ã ß à á ï í
s
ò
Þ ç Ù â Þ å Ù ã ä Ú Þ é á Ü Ý Þ ì Þ é Ü ï â à á ë Þ â ó ß Û à Ü ä Ý Ü Ý Þ é ñ ñ Ú à é á ä Þ Ù ç ç é á ë
ã á ñ Ú ã ï ç â Ù ì Ù ã Ü Ú Þ Ü í
s
ô
â Þ ß ß Ü Ý Þ â Þ Ú Þ é ß Þ î ã Ü Ü Ù á é á ë Ü ã â á Ü Ý Þ Û Ý Ù Ú Þ ä ã Ü Ü Þ â Ý Ù ã ß à á ï à á Ü Ý Þ
ë à â Þ ä Ü à Ù á Ù ç Ü Ý Þ é â â Ù Û í õ Þ ì Ù ð Þ Ü Ý Þ ñ ã ß Ý Þ â é á ë Ü Ý Þ Ü â é å í
s
ö
á ß ä â Þ Û Ü Ý Þ ß ä â Þ Û â à á ï é á ë â Þ ì Ù ð Þ é Ú Ú ñ é â Ü ß Ù ç Ü Ý Þ ä ã Ü Ü Þ â Ý Ù ã ß à á ï í
NOTE: Do not clean the parts in the dishwasher.
s
÷
é ß Ý é Ú Ú ñ é â Ü ß Ü Ý é Ü Ý é ð Þ ä Ù ì Þ à á Ü Ù ä Ù á Ü é ä Ü Û à Ü Ý ì Þ é Ü à á Ý Ù Ü ß Ù é ñ å
Û é Ü Þ â í
CLEAN THEM IMMEDIATELY AFTER USE.
s
õ à á ß Þ Ü Ý Þ ì ä Ú Þ é á Û à Ü Ý Ý Ù Ü Û é Ü Þ â é á ë ë â å Ü Ý Þ ì
IMMEDIATELY.
s
ø
Ü à ß â Þ ä Ù ì ì Þ á ë Þ ë Ü Ù Ú ã î â à ä é Ü Þ Ü Ý Þ ä ã Ü Ü Þ â ã á à Ü é á ë Ü Ý Þ ì à á ä à á ï ë à ß ä ß
Û à Ü Ý ß Ù ì Þ ð Þ ï Þ Ü é î Ú Þ Ù à Ú í
s
Ø Ù â Þ é ß å Ü â é á ß ñ Ù â Ü é Ü à Ù á ó Ü Ý à ß é ñ ñ Ú à é á ä Þ Ý é ß é ä Ù á ð Þ á à Þ á Ü ä é â â å
Ý é á ë Ú Þ Ú Ù ä é Ü Þ ë Ù á Ü Ý Þ î é ä ù ú Ø à ï í û ü ý í
NOTE: For easy storage place the mincing discs,
separator and Kibbeh shaper into the pusher.
þ ÿ

AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS 16
TECHNICAL INFORMATION
RATED VOLTAGE 220 - 240V~
RATED FREQUENCY 50Hz
RATED POWER INPUT 800W
PROTECTION CLASS CLASS II (This product does not need
to be earthed)
Disposal Information
Correct disposal of this product
This Wheeled Bin symbol indicates that this product
should not be disposed of with other household
wastes. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable recycling of material resources.
Contact your local authority for recycling facilities in
your area.
Dispose of packaging material according to local
regulations.

Troubleshooting
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/20151300 554 124 info@gstrading.com.au
AUS 17
Problem Cause Solution
The meat
grinder
suddenly
stops working.
Meat grinder
may have
overheated. 1SFTTUIFTXJUDICVUUPOto turn off the meat
grinder.
%JTDPOOFDUUIFQMVHGSPNthe power socket.
-FUUIFBQQMJBODFDPPMdown for 60 minutes.
3FDPOOFDUUIFQMVHUPUIFpower socket.
1SFTTUIFSFTFUCVUUPOPOthe bottom of the
appliance to turn on the
appliance.
5VSOUIFNFBUHSJOEFSPOagain.
Meat is not
grinding.
Mincing discs
may not be
correctly
attached. .BLFTVSFUIFHSPPWFJOthe mincing discs align
with the mark at the top
of the cutter housing
opening.
Meat is not
being pushed
through the
separator.
The separator
is not fitted
correctly. Make sure the groove in
the separator aligns with
the mark at the top of the
cutter housing opening.
Meat is not
being cut.
Cutter blade is
not correctly
fitted. Place the flat part of the
blade facing outwards.

Meat Grinder
AFTER SALES SUPPORT
MODEL: LMG800 PRODUCT CODE: 48624 02/2015
1300 554 124 info@gstrading.com.au
AUS YEAR WARRANTY
1
We recommend you save this
Unfortunately, from time to time, faulty products are manufactured which need to
be returned to the supplier for repair.
Please be aware that if your product is capable of retaining userHFOFrated data
(such as files stored on a computer hard drive, telephone numbers stored on
a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a U4#memory stick) during the process of
repair, some or all of your stored data may be lost.
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used
XIFSFUIFZNFFU"-%*TTUSJOHFOURVBMJUZTQFDJmDBUJPOTIf at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 554 124 or write to us at:
(MPCBM4PVSDF5SBEJOHPO Box 3046
.PPSBCCJO&BTU7*$info@gstrading.com.au
Repair and Refurbished
Goods or Parts Notice
Table of contents