Kurzweil K2500 User manual

Quick Access Mode and the Quick Access Editor
8-1
Chapter 8
Quick Access Mode and the
Quick Access Editor
In Quick Access mode, you can select programs or setups with a single press of an
alphanumeric button (or with the other data entry methods). For example, in the illustration
below, you would simply press "5" on the alphanumeric pad to choose "FM Harmonica,".
Notice that your selection becomes highlighted in the list, as well as appearing on the line just
above the soft button labels.
QuickAccessMode|||<>Bank:1|For|Show|2|||
Stage|Piano|||Marimba|||||||Voice+String
Honky-Tonk|||| FM|Harmonica||ElvisTheDog|
Memorymoog|4||Jazz|Trio|2|||Fretless|Bas
||||||||||||||Velveteen|||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Xpose:0ST|||FM|Harmonica|||||||Chan:1||
Octav-| Octav+| Panic|| Sample| Chan-|| Chan+
Using Quick Access mode involves selecting Quick Access banks from the list of factory preset
or user-programmed banks. This can be done by using the bank selection shortcut: press the +/
- or CLEAR button on the alphanumeric pad, and you’ll be prompted to enter a bank number.
Type the desired number on the alphanumeric pad, then press ENTER. The bank will be
selected, and you’ll return to the Quick Access page. Or use the CHAN/BANK buttons to scroll
through the QA banks.
Each bank contains ten memory slots, or entries, where you can store programs or setups in any
combination. Any program or setup in the currently selected bank can be selected with the
numeric buttons 0 through 9.
The ROM (factory preset) QA banks are organized into useful groupings of sounds that we
think you’ll find convenient.
You can store 20 Quick Access banks in each memory bank (except the Zeros bank, which can
store 75). See “Storing Objects in Memory Banks” in Chapter 2 of the Reference Guide for a
breakdown of the Quick Access bank IDs that belong in each memory bank. Press both
CHAN/BANK buttons simultaneously to quickly move between memory banks.
The MIDI Program Change commands that the K2500 sends when in Quick Access mode can
differ from those in Program or Setup mode. This depends on the setting you have for the
PChgType parameter in MIDI mode. If the setting is “Extended” or “Kurzweil,” the Program
Change commands sent are the same as in Program or Setup mode. If the setting is “QA
Extended” or QA Kurzweil,” the K2500 will send Program Change commands that correspond
to the current Quick Access bank and the entry you select, not the actual program number of
the entry. See “Program Change Formats” in Chapter 10.

Quick Access Mode and the Quick Access Editor
8-2
Everything you need to know about using Quick Access mode for performance is covered in
Chapter 2, in the section called “Playing the Presets,” so we’ll move on to the Quick Access
Editor, which you’ll use to create your own Quick Access banks.
The first step in editing Quick Access banks is to select Quick Access mode. Use the CHAN/
BANK buttons to select the bank you wish to edit. The currently selected bank is shown in the
top line of the Quick Access mode page. Press the EDIT button, and you’ll enter the editor,
where you can examine each entry in the bank you selected. The Quick Access Editor page
looks like this:
EditQuickAccess||||||||||||||<>Entry:9||
||||||||||||||||||||198|Blues|in|CMOS|||
Entry:||Type:|||||||199|Default|Program|
9|||||||Program|||||| |1|Righteous|Piano|
||||||||||||||||||||||2|Mondo|Bass||||||
||||||||||||||||||||||3|Killer|Drums||||
||||||||||||||||||||||4|Elvis|Again|||||
Name||| Save||| Delete| Dump|||||||||||||||
The top line gives you the usual mode reminder, and shows you which of the ten entries you’re
looking at. The cursor is highlighting the object (program or setup) that’s stored in that entry.
The easiest way to edit the bank is to use the CHAN/BANK buttons to scroll through the ten
entries. The entry number will change both at the top of the page, and at the left of the page. As
the entry number changes, the highlighted objects at the center of the page will change as well,
showing you what’s stored in each entry. On the page above, for example, entry 9 is the current
entry. The Type parameter tells you that the object stored at entry 9 is a program. The cursor
highlights the program’s ID and name.
In this example, you could select a different program with your favorite data entry method. If
you wanted to store a setup in that entry instead of a program, you would move the cursor to
the Type parameter and change its value to Setup. The list of objects would change from the
program list to the setup list, and you could move the cursor back to the setup list and select
another setup. When you select the Entry or Type parameter, the list of objects at the right
disappears, leaving only the currently selected object. This makes it easier to see when it’s not
highlighted by the cursor.
When you’ve filled each entry with the object you want, press the Name soft button if you want
to rename the bank, or press the Save soft button to begin the save procedure. Press the Dump
soft button to dump the bank via MIDI System Exclusive.