Kuvings M7 User manual

WHOLE SLOW
Read
before first use
How to
assemble
&
disassemble
Keep where it can be
easily accessed.
Read
instruction
manual
for further details.

How
to
Assemble
{,
Assemble
the
strainer
into
the
rotation
wiper.
Place
this
assembly
in
to
the
juicing
bowl
ensuring
the
red
dot
@
on
the
strainer
is
aligned
with
the
red
dot
@
onthe
juicing
bowl.
strainer.
Turn
and
press
down
on
it
until
it
clicks
into
place.
a
The
j
juicing
s«
screw
t
to
locked
in
place
in
order
to
close
the
drum
lid.
2,
Place
the
juicing
screw
into
the
3
Aligning
the
red
dot
@
on
the
drum
lid
with
the
red
dot
®@
on
the
juicing
bowl.
Turn.
clockwise
to
close,
aligning
the
red
dot
@
on
the
drum
lid
with
the
close
mark
§§.
Place
the
drum
lid
on
the
juicing
bowl.
Align
the
down
arrow
Von
the
drum
lid
with
the
ICOPEN
mark
on
the
base
and
turn
to
the
4CLOSE
position.

(
5,
Open/Close mark on the top-
set.
Remove
the
silicone
ring
from
strainer
to
clean.
After
cleaning,
push
in
the
silicone
shown in the
@
[open
close
4
(\
open
Close
Juicer
will
not
operate
if
parts
are
not assembled properly.
SiliconeBrush
“Insert
into
the
slot
with
the
tai
6, Place the pulp cup under the
pulp
spout
and
place
the
juice
cup
under
the
juice
spout.

How
to Disassemble
4, Switch OFF and unplug the 3, Turn the juicing bowl counter
power cord from the wall clockwise to open.
outlet.
pe
neg
clockwise
to
open.
oa]
~
2. Turn the drum lid counter |
|
|
|
i
i
4.
Remove
the
juicing
screw,
strainer and rotation wiper
When
moving
the
appliance,
do
<
“a
BY unit from the juicing bowl.
not lift by grabbing the feeding
tube. Always lift the appliance by
grabbing the base or handle.
IV