Kyocera TASKalfa 2550ci Service manual

TABLE OF CONTENTS
INTRODUCTION ..................................................................................................................................................................................1
GENERAL INFORMATION ..................................................................................................................................................................1
DEALER LIMITED WARRANTIES .......................................................................................................................................................2
WARRANTY RETURNS.......................................................................................................................................................................3
PRODUCT TRAINING..........................................................................................................................................................................3
SERVICE DOCUMENTATION .............................................................................................................................................................3
SERVICE DOCUMENTATION (continued) ..........................................................................................................................................4
ACCESSORY / OPTIONS ....................................................................................................................................................................4
MAXIMUM MONTHLY VOLUME..........................................................................................................................................................4
YIELDS OF SUPPLY ITEMS & COST PER COPY ..............................................................................................................................5
MEMORY SPECIFICATIONS AND REFERENCE ...............................................................................................................................5
MEMORY TYPE ...................................................................................................................................................................................5
NEW & REPAIR PRINTED CIRCUIT BOARDS ...................................................................................................................................5
FIRMWARE INFORMATION ................................................................................................................................................................6
MAINTENANCE KIT YIELDS & COST PER COPY..............................................................................................................................7
MAINTENANCE KIT CONTENTS ........................................................................................................................................................7
2550ci MACHINE SPECIFICATIONS...................................................................................................................................................8
2550ci MACHINE SPECIFICATIONS (continued)................................................................................................................................9
DOCUMENT PROCESSOR SPECIFICATIONS ..............................................................................................................................9
PRINTER SPECIFICATIONS .........................................................................................................................................................10
SCANNER SPECIFICATIONS .......................................................................................................................................................11
FAX (Option) SPECIFICATIONS....................................................................................................................................................11
PF-790 SPECIFICATIONS.............................................................................................................................................................12
DF-470 SPECIFICATIONS.............................................................................................................................................................12
BTU’s..................................................................................................................................................................................................13
POWER CONSUMPTION ..................................................................................................................................................................13
INSTALLATION REQUIREMENTS ....................................................................................................................................................14
WEIGHT AND DIMENSIONS .............................................................................................................................................................14
MACHINE SPACE REQUIREMENTS ................................................................................................................................................14
UTILITIES...........................................................................................................................................................................................15
SUPPORTED HyPAS APPLICATIONS..............................................................................................................................................15
PRINT DRIVERS................................................................................................................................................................................16
PRODUCT CONFIGURATION...........................................................................................................................................................17

RECOMMENDED ACTION FOR FIELD MACHINES
AT SETUP NEXT SERVICE CALL
NEXT PM INFORMATION ONLY
TECHNICAL BULLETIN TASKalfa 2550ci
Bulletin #
TASKalfa 2550ci-01
Model TASKalfa 2550ci
Date Revised
07/18/12
Updated Serial Number (CDN) Index
From introduction
Subject NEW MODEL PRODUCT INFORMATION
This technical publication is confidential information that is the property of KYOCERA Document Solutions Canada, Ltd. It is solely for the use of
KYOCERA Document Solutions authorized dealers. This information may not be published, reproduced, sold, or copied in any media. Its
unauthorized use is prohibited. Copyright © 2012 by KYOCERA Document Solutions Canada, Ltd. All rights reserved
INTRODUCTION
Technical Services is pleased to announce the addition of the Kyocera TASKalfa 2550ci Colour MFP. The
TASKalfa 2550ci has easily accessible maintenance components for optimum serviceability at the set
maintenance interval of 200K. The MFP setup can be completed in less than 10 minutes with optional
components requiring additional time.
Key Features are as follows:
TASKalfa 2550ci: 25CPM B&W/25 PPM Colour, Standard Document Processor
Standard Print Controller: PowerPC750CL (600MHz)
2GB Standard System Memory, non-upgradable
Standard Colour Scan System
Standard Duplex Unit
Standard Gigabit Ethernet
200K Maintenance cycle
Energy Star Compliant
POP/SMTP over SSL
GENERAL INFORMATION
Product Name
TASKalfa 2550ci
Product Code
2MV
Product Training
Learning Centre on KDAconnect
Diagnostic Centre Contact Number
1-800-268-4735
Business Application Group Email
[email protected]yocera.com
KDAconnect Web Site
kdaconnect.com
KDAconnect Help Desk
[email protected]yocera.com
Kyocera Public Web Site
kyoceradocumentsolutions.ca
Kyocera Technical Support (Email)
[email protected]yocera.com
Material Safety Data Sheet
[email protected]yocera.com
National Processing Centre (Customer Service)
1-800-268-4735 or [e-mail]
National Training Centre
[email protected]yocera.com

TASKalfa 2550ci-01
July 18, 2012
Page 2 (CDN)
DEALER LIMITED WARRANTIES
FOR TASKalfa 2550ci
KYOCERA Document Solutions Canada, Ltd. (“Kyocera”) warrants its new colour Multifunctional Products (referred
to herein as “MFP”) to Authorized Dealers as follows:
Mainframes and Accessories. The MFP’s mainframe and accessories are warranted against defects in
workmanship and material under normal use and service for a period of 36 months from installation with first end-
user, or 39 months from Kyocera’s invoice date to Dealer, or the specified number of copies/prints as listed below,
whichever occurs first (referred to herein as “MFP Warranty Period”). Kyocera’s obligation hereunder is expressly
limited to providing Dealer with the parts required to repair the MFP or crediting Dealer's account for the cost of said
parts, at Kyocera's election.
Maintenance Kits. Maintenance Kits consist of the developing unit, the drum unit, the transfer belt, and the fixing
unit. Components of Maintenance Kits included with the original MFP are warranted against defects in material and
workmanship for a period of 36 months from date of installation with first end-user, or 39 months from Kyocera’s
invoice date to Dealer (referred to herein as Original Maintenance Kit Warranty Period), or the specified number of
copies/prints listed below (referred to herein as Original Maintenance Kit Copy Allowance), whichever occurs first.
Replacement Maintenance Kits purchased and installed after the Original Maintenance Kit Copy Allowance has
expired, shall have a limited warranty for the specified number of copies/prints listed below, or until the Original
Maintenance Kit Warranty Period expires, whichever occurs first. Replacement Maintenance Kits purchased and
installed after the Original Maintenance Kit Warranty Period has expired shall have a limited warranty of 90 days. To
be covered by this 90 day warranty, the Replacement Kit must be installed and registered prior to the MFP exceeding
10% of the Original Maintenance Kit Copy Allowance.
These warranties do not cover MFPs or components of Maintenance Kits which: (a) have become damaged due to
operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have used
parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been installed or serviced by a
technician not employed by Kyocera or an Authorized Kyocera Dealer, (d) have had the serial number modified,
altered, or removed, or (e) Dealer fails to register the installation information for the MFP with Kyocera utilizing
KDAconnect.
THESE WARRANTIES SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. KYOCERA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF
THE USE OF, OR INABILITY TO USE, THE MFP.
MFP MODEL
MFP
COPIES/PRINTS
ORIGINAL MAINTENANCE KIT
COPY ALLOWANCE
TASKalfa 2550ci
200,000
200,000

TASKalfa 2550ci-01
July 23, 2012
Page 3 (CDN)
WARRANTY RETURNS
To make it easier for Kyocera to process your Warranty Claim and verify other key information, select ALL
and include the Maintenance Report (Seven Pages),Status Page (One Page), Service Status (Two
Pages), and Event Log (One Page), Network Status Page (Three Pages) with the returned item.
If you have an image quality problem, run U089 and include the 5 colour samples.
Add comments to describe the problem found by the technician. Do not add comments that the customer
believes to be the problem.
PRODUCT TRAINING
Product Training
Technical Learning Centre on KDAconnect
Prerequisites
Color Theory 101
Product Training for the TASKalfa 2550ci is offered as a full On-Line Training Course available at
the Learning Centre on KDAconnect.
To participate in the On-line Training, a 2550ci is required. The Dealership can place their first order
for the training equipment prior to authorization, but additional equipment purchases require that at
least one Technician has completed the On-Line Training Course with an overall score of 80% or
higher. SERVICE DOCUMENTATION
Description
Part Number
TASKalfa 2550ci Service Manual
Available on KDAconnect
TASKalfa 2550ci Parts List
Available on KDAconnect
2550ci Operation Guide
Available on KDAconnect
2550ci Safety Guide
Included in the Box & Available on KDAconnect
2550ci Quick Installation Guide
Included in the Box & Available on KDAconnect
2550ci Printer Driver User Guide
Available on KDAconnect
2550ci Quick Guide (Email Operation)
Available on KDAconnect
Fax System (W) Service Manual
Available on KDAconnect
Fax System (W) Parts List
Available on KDAconnect
Fax System (W) Operation Guide
Available on KDAconnect
Fax System (W) Installation Instructions
Available on KDAconnect
DF-470 Service Manual
Available on KDAconnect
DF-470/AK-470 Parts List Rev-1
Available on KDAconnect
DF-470/AK-470 Installation Instructions
Available on KDAconnect
IB-50 Setup Guide
Available on KDAconnect
IB-50 Operation Guide (HTML format)
Available on KDAconnect
IB-50 Installation Instructions
Available on KDAconnect
PF-790 Service Manual
Available on KDAconnect
PF-790 Parts List
Available on KDAconnect
PF-790 Installation Instructions
Available on KDAconnect

TASKalfa 2550ci-01
July 18, 2012
Page 4 (CDN)
SERVICE DOCUMENTATION (continued)
Description
Part Number
Network Fax Driver Operation Guide Rev-3
Available on KDAconnect
Kyocera Command Centre RX Operation Guide Ver. 1.60
Available on KDAconnect
Kyocera Net for Direct Printing Operation Guide Ver. 3.40
Available on KDAconnect
KM-NET Admin Operation Guide Rev 3.0
Available on KDAconnect
Kyocera Net Viewer User Guide Rev. 5.4.2012.2
Available on KDAconnect
PRESCRIBE Commands Technical Reference Operation Guide Rev.4.7
Available on KDAconnect
PRESCRIBE Commands Command Reference Operation Guide Rev.4.8
Available on KDAconnect
ACCESSORY / OPTIONS
Item
Part Number
Description
PF-790
1203N47US0
500 Sheet dual Capacity Paper Tray
DF-470
1205JS0UN0
500 Sheet Finisher (Requires AK-470)
AK-470
1703NS0UN0
Bridge Unit for DF-470
Data Security Kit (E)
855D200600
Hard Drive Encryption/Overwrite Kit
IB-50
1505JV0UN0
Gigabit Ethernet
Fax System (W)
1503N62US0
Fax/Network Fax Kit
Internet Fax Kit (A)
1703MC0UN0
Internet Fax
MM-16-128
1503MB0UN0
Fax Memory
Card Reader Holder (B) 
1709AD0UN0
Mount for the Card Reader
Stand
855D200630
Stand for 2550ci
SH-10
1903JY0000
Staple Cartridge for DF-470
DT-730
1902LC0UN1
Document Tray
WT-895
302K093110
Waste Toner Bottle
Note: See the Card Authentication Kit B Price Schedule for available items and pricing.
ITEM
Availability
Cherry Keyboard G84-4100 USB
www.cherrycorp.com
MAXIMUM MONTHLY VOLUME
MAX. MONTHLY VOLUME
2550ci
100K Sheets

TASKalfa 2550ci-01
July 18, 2012
Page 5 (CDN)
YIELDS OF SUPPLY ITEMS & COST PER COPY
Description
Part Number
New Cartridge
Yield 5%
Price
CPC
Toner TK-8317C
1T02MVCUS0
6,000 pages
$42.00
0.007
Toner TK-8317M
1T02MVBUS0
6,000 pages
$42.00
0.007
Toner TK-8317Y
1T02MVAUS0
6,000 pages
$42.00
0.007
Toner TK-8317K
1T02MV0US0
12,000 pages
$49.00
0.00408
MEMORY SPECIFICATIONS AND REFERENCE
The 2550ci is standard-equipped with 2GB of Memory, which cannot be upgraded.
Memory Type
Standard
Maximum
System Memory
2048MB DIMM
One slot
2048MB
Fax Memory
12MB
Approx. 700pages
128MB Option
Approx 7,000 pages
Hard Drive
160GB
160GB
MEMORY TYPE
Item
Specification
Type & Number of Pins
200pin DDR2 DIMM
NEW & REPAIR PRINTED CIRCUIT BOARDS
PCB NAME
NEW PCB P/N
REPAIR PCB
P/N
REPAIR PCB PRICE *
Parts PWB Main Ass’y SP
302MV94220
855RB00267
$693.35
Parts PWB Engine Ass’y SP
302MV94190
855RB00268
$167.20
PARTS PWB IH 100 ASSY SP
302MV94410
855RB00269
$167.87
Parts Unit Low Voltage 100 SP
302MV94340
855RB00270
$171.00
* Repair PCB Price includes credit issued after return of old Board.
Defective PCB’s being returned within the 3-Year warranty period must be returned to the Kyocera
Document Solutions Canada National Return Centre utilizing the Parts Warranty Registration & Return
System on KDAconnect. Print out the Return Authorization form obtained through the system and return it
with the Circuit Board for Credit. Any associated mounting brackets, hardware, system software and
original packaging must be included with the claim. Credit will then be issued to your account.
For defective PCB’s out of warranty, a Repair PCB must be ordered from the Parts Distribution Centre.
The dealer will be charged 100% of the New PCB price. The defective PCB can be returned using the
Online Repair Board Form within 30 days of the Repair PCB invoice date. Upon receipt of the defective
PCB at the Kyocera Document Solutions Canada National Return Centre, the dealer will be credited 55%
of the New PCB price. If a New PCB is ordered instead of a Repair PCB, credit will not be issued for the
returned defective PCB.
All Part Numbers and Pricing subject to change without notice.

TASKalfa 2550ci-01
July 18, 2012
Page 6 (CDN)
FIRMWARE INFORMATION
Version
(Shown on the Status Page)
Description
Location
Initial Firmware Pack
(Flash)
Available on KDAconnect
2MV_2F00.002.012
MAIN
2MV_7000.002.008
MMI
2MV_1000.002.004
ENGINE
2MV_81BR.001.007
LANGUAGE BR
2LC_F000.001.008
BROWSER
2MV_1E00.001.002
SOFTWARE IO
2MV_1200.002.002
SCANNER
2MV_1800.001.009
SOFTWARE VIDEO
2MV_1C00.002.001
SOFTWARE LSU
2LC_1A00.002.001
SOFTWARE IH
ES_SKIP.ON.V001
SPECIAL MASTER FILE
2MV_K0AL.C01.003
Software Copy Colour table
2MV_GZ00.001.002
Software Multi Colour table
Two Versions of Firmware Packs will be available for download from KDAconnect. The normal
2550ci Combined Firmware Pack and a 2550ci Combined Firmware “Turbo” Pack. The “Turbo”
Pack will contain a special Skip file “ES_SKIP.ON.V001” which will speed up the upgrade process
by only upgrading versions that have changed. The Normal Pack will over write all firmware.
Note: At Setup, Technical Services recommends checking KDAconnect and downloading the
current Upgrade Pack Firmware and to periodically check for new updates to install.

TASKalfa 2550ci-01
July 18, 2012
Page 7 (CDN)
MAINTENANCE KIT YIELDS & COST PER COPY
Description
Part Number
Yield
Price
CPC
MK-8315A (Maintenance Kit)
1702MV0UN0
200K
$619.00
0.00310
MK-8315B (Maintenance Kit)
1702MV0UN1
200K
$630.00
0.00315
MK-470 (DP Maintenance Kit)
1703M80UN0
300K
$33.50
0.000016
MAINTENANCE KIT CONTENTS
MK-8315A
Description
Qty
Drum Unit, DK-8315
1
Developing Unit, DV-8315K
1
Primary Transfer Belt Unit, TR-8315A
1
Secondary Transfer Unit, TR-8315B
1
Fuser Unit , FK-8315
1
Parts Primary Feed Ass’y SP
1
Parts Cleaning Regist Ass’y SP
1
Parts Roller MPF Ass’y SP
1
Parts Pad Separation Ass’y SP
1
MK-8315B
Description
Qty
Drum Unit, DK-8315
3
Developing Unit, DV-8315C
1
Developing Unit, DV-8315M
1
Developing Unit, DV-8315Y
1
MK-470
Description
Qty
Feed Roller DP
1
RETARD GUIDE DP
1
RETARD ROLLER DP
1
Contents are subject to change without Notice.

TASKalfa 2550ci-01
July 18, 2012
Page 8 (CDN)
2550ci MACHINE SPECIFICATIONS
Item
Specifications
Type
Desktop
Printing Method
Electrophotography by semiconductor laser, tandem (4) drum system
Originals
Sheet, Book, 3-dimensional objects (maximum original size: A3/Ledger)
Original Feed System
Fixed
Paper Weight
Cassette
60 ~256 g/m2, 16~67lb. Bond (Duplex: 60~220 g/m2)
MP Tray
60 ~256 g/m2, 16~67lb. Bond, 67lb.Bond = 140lb. Index
Paper Type
Cassette
Plain, Recycled, Preprinted, Bond, Colour, Letterhead, Thick,
High quality, Custom 1 to 8 (Duplex: Same as simplex)
MP Tray
Plain, Vellum, Recycled, Preprinted, Bond, Cardstock, Colour,
Letterhead, Thick, Envelope, Coated, High quality, Rough,
Transparency (OHP film), Labels, Prepunched ,Custom 1 to 8
Paper Size
Cassette
A3, A4, A5, B4, B5, Ledger, Letter, Legal, Statement, Oficio II, Folio, 8K,, 16K,
MP Tray
A3, A4, A5, A6, B4, B5, ISO B5, B6, Ledger, Letter, Legal, Statement,
Executive, Oficio II, Folio, 8K, 16K, Envelope #10, Envelope #9,
Envelope #6, Envelope Monarch, Envelope DL, Envelope C4,
Envelope C5, Postcards, Return postcard, Youkei 2, Youkei 4, Custom
Zoom Level
Manual mode : 25 to 400%, 1% increments
Auto mode : 400%, 200%, 141%, 122%, 115%, 86%, 81%, 70%, 50%, 25%
Copying Speed
Colour
B/W
Cassette
MP tray
Cassette
MP tray
A4/Letter
25 sheets/min
17 sheets/min
25 sheets/min
17 sheets/min
A4R/LetterR
17 sheets/min
14 sheets/min
17 sheets/min
14 sheets/min
A3/Ledger
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
B4/Legal
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
B5
25 sheets/min
17 sheets/min
25sheets/min
17 sheets/min
B5R
17 sheets/min
14 sheets/min
17 sheets/min
14 sheets/min
A5R
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
First copy time
(A4/Letter, feed from cassette)
When the DP is not used: 9.9 s or less (Colour) / 7.9 s or less (B/W)
When using the DP : 11.9 s or less (Colour) / 9.9 s or less (B/W)
Warm-up time
(22 °C/71.6 °F, 60% RH)
Power on : 45 s or less
Paper Capacity
Cassette
1000 sheets (80g/m2, 500 sheets x2)
MP Tray
100 sheets (80 g/m2, plain paper, A4/Letter or less) 25 sheets (80 g/m2, plain
paper, A4/Letter or more)
Output Tray Capacity
Inner Tray: 250 sheets (80g/m2, 21lb. Bond)
Job Separator: 30 sheets (80g/m2, 21lb. Bond)
Continuous Copying
1 to 999 sheets
Light Source
White LED

TASKalfa 2550ci-01
July 18, 2012
Page 9 (CDN)
2550ci MACHINE SPECIFICATIONS (continued)
Item
Specifications
Scanning System
Flat bed scanning by CCD image sensor
Photoconductor
OPC (diameter 30 mm)
Image write system
Semiconductor laser
Charging System
Contact charger roller method
Developing System
Touchdown developing system
Developer: 2-component
Toner replenishing: Automatic from Toner Container
Transfer System
Primary: Transfer Belt
Secondary: Transfer roller
Separation System
Small diameter separation, separation electrode
Cleaning System
Counter blade cleaning
Charge Erase System
Exposure by cleaning lamp (LED)
Fusing System
One axis IH established method
Heat source: IH inverter heating
Abnormally high temperature protection devices: thermostat
CPU
PowerPC750CL (600MHz)
Main Memory
Standard
2048 MB
Maximum
2048 MB
Interface
Standard
USB interface connector: 1 (USB Hi-speed)
USB host: 2 (USB Hi-speed)
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
Option
eKUIO/ slot: 2
Resolution
600 × 600 dpi
Operating Environment
Temperature
10 to 32.5 °C/50 to 90.5 °F
Humidity
15 to 80% RH
Altitude
2,500 m/8,202 ft or less
Brightness
1,500 lux or less
Dimensions (W × D × H)
594 × 699 × 862 mm / 23 3/8” × 27 1/2 “× 33 15/16”
Weight (with toner container)
95.5 kg / 210.5 lb (with toner containers)
Space required (W × D)
874× 699 mm / 34 7/16” × 27 1/2” (using MP tray)
Power source
120 V AC, 60 Hz, more than 12 A
220 - 240 V AC, 50/60 Hz, more than 7.2 A
Noise Level
Measurement Method
according to ISO7779/ISO9296
Ready Mode: 47 dB(A)
Copying/Printing: B&W, 67.75 dB(A), Colour 68.5 dB(A)
DOCUMENT PROCESSOR SPECIFICATIONS
Item
Specifications
Original feed method
Automatic feed
Supported original types
Sheet originals
Original sizes
Maximum: A3/Ledger
Minimum : A5/Statement
Original weights
Simplex: 45 to 160 g/m2 ,13~43lb Bond
Duplex : 50 to 120 g/m2,13~32lb. Bond
Loading capacity
50 sheets (50 to 80 g/m2) 13~21lb. or less

TASKalfa 2550ci-01
July 18, 2012
Page 10 (CDN)
PRINTER SPECIFICATIONS
Item
Specifications
Printing Speed
(Simplex)
Colour
B/W
Cassette
MP tray
Cassette
MP tray
A4/Letter
25 sheets/min
17 sheets/min
25 sheets/min
17 sheets/min
A4R/LetterR
17 sheets/min
14 sheets/min
17 sheets/min
14 sheets/min
A3/Ledger
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
B4/Legal
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
B5
25 sheets/min
17 sheets/min
25 sheets/min
17 sheets/min
B5R
17 sheets/min
14 sheets/min
17 sheets/min
14 sheets/min
A5R
13 sheets/min
10 sheets/min
13 sheets/min
10 sheets/min
Printing Speed
(Duplex)
Colour
B/W
A4/Letter
23 sheets/min
16 sheets/min
23 sheets/min
16 sheets/min
A4R/LetterR
9 sheets/min
8 sheets/min
9 sheets/min
8 sheets/min
A3/Ledger
7 sheets/min
6 sheets/min
7 sheets/min
6 sheets/min
B4/Legal
7 sheets/min
6 sheets/min
7 sheets/min
6 sheets/min
B5
23 sheets/min
16 sheets/min
23 sheets/min
16 sheets/min
B5R
9 sheets/min
8 sheets/min
9 sheets/min
8 sheets/min
A5R
13 sheets/min
9 sheets/min
13 sheets/min
9 sheets/min
First print time (A4/Letter feed from
cassette)
B/W: 9.4 s or less
Colour: 10.9 s or less
Resolution
600x600 dpi
Operating system
Windows 2000, Windows XP, Windows XP Professional,
Windows Server 2003, Windows Server 2003, x64 Edition,
Windows Vista x86 Edition, Windows Vista x64 Edition,
Windows 7 x86 Edition, Windows 7 x64 Edition, Windows Server 2008,
Windows Server 2008 x64 Edition, Apple Macintosh OS 9.x, OS X
Interface
USB interface connector: 1 (USB Hi-speed)
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
Page Description Language
PRESCRIBE
Emulation
PCL-6(PCL5c/PCL-XL), KPDL3, XPS

TASKalfa 2550ci-01
July 18, 2012
Page 11 (CDN)
SCANNER SPECIFICATIONS
Item
Specifications
Operating system
Windows 2000 (Service Pack 4), Windows XP, Windows Vista,
Windows 7, Windows Server 2003, Windows Server 2008
System requirements
IBM PC/AT compatible
CPU: Celeron 600 MHz or higher
RAM: 128 MB or more
HDD free space: 20 MB or more
Interface: Ethernet
Resolution
600 dpi, 400 dpi, 300 dpi, 200 dpi, 200 × 100dpi, 200 × 400dpi
File format
TIFF, JPEG, XPS, PDF (MMR/JPEG compression),
PDF (high compression)
Scanning speed
Simplex
B/W : 48 images/min
Colour: 48 images/min
(A4 landscape,300 dpi, Image quality:
Text/Photo original)
Duplex
B/W : 15 images/min
Colour: 15 images/min
(A4 landscape, 300 dpi, Image quality:
Text/Photo original)
Interface
Ethernet (10 BASE-T/100 BASE-TX/1000BASE-T)
Network protocol
TCP/IP
Transmission system
PC transmission
SMB Scan to PC
FTP Scan to FTP, FTP over SSL
E-mail transmission
SMTP Scan to E-mail, POP/SMTP over SSL
TWAIN scan
KM-WSDL, WIA Driver
WIA scan
WSD-Scan
FAX (Option) SPECIFICATIONS
Item
Specifications
Compatibility
G3
Communication line
Subscriber telephone line
Transmission time
3 s or less (33600 bps, JBIG, ITU-T A4 #1 chart)
Transmission speed
33600/31200/28800/26400/24000/21600/19200/16800/14400/12000/9600/
7200/4800/2400 bps
Coding scheme
JBIG/MMR/MR/MH
Error correction
ECM
Original size
Max. width: 11"/297 mm
Max. length: 63"/1600 mm
Automatic document feed
Max. 50 sheets
Scanner resolution
Horizontal × Vertical
200 × 100 dpi Normal (8 dot/mm × 3.85 line/mm)
200 × 200 dpi Fine (8 dot/mm × 7.7 line/mm)
200 × 400 dpi Super fine (8 dot/mm × 15.4 line/mm)
400 × 400 dpi Ultra fine (16 dot/mm × 15.4 line/mm)
600 x 600dpi
Printing resolution
600 × 600 dpi
Gradations
256 shades (Error diffusion)
One-Touch key
1000 keys
Multi-Station transmission
Max. 500 destinations (iFAX: Max. 100 destinations)
Substitute memory reception
700 sheets or more (when using ITU-T A4 #1 chart)
Image memory capacity
12 MB (standard) (for incoming faxed originals)
Report output
Send result report, FAX RX result report, Report for job canceled before
sending, Activity report, Status page

TASKalfa 2550ci-01
July 18, 2012
Page 12 (CDN)
PF-790 SPECIFICATIONS
Item
Specifications
Paper weight
60 ~163 g/m2, 16~42lb.
Paper type
Plain, Recycled, Colour
Paper size
A3,A4R,A4, A5R, B5R,B5,Folio,Ledger, LetterR,Letter, Legal, Statement,
Executive, Oficio II, 8K, 16KR,16K
Loading capacity
500 sheets (80 g/m2, 21lb)
Dimensions (W × D × H)
590 × 595 × 334 mm
23 1/4 × 23 7/16 × 13 1/8”
Weight
20 kg/ 44.1 lb or less
Power source
Electrically connected to the machine.
DF-470 SPECIFICATIONS
Item
Specifications
Type
Hanger Type
Number of trays
One tray
Paper weight
52 ~256 g/m2, 14~67lb. Bond
Tray capacity
When not stapling
A3, B4, Ledger, Legal, Oficio II, 216
x 340mm, 8K: 250 sheets
A4, A4R, B5, B5R, Letter, LetterR,
ExecutiveR, 16K: 500 sheets
When stapling 2 or 10
sheets
A3, B4, Ledger, Legal, 8K: 22 sets
A4R, LetterR: 40 sets
A4, B5,Letter, 16K: 45 sets
When stapling 11 or
20 sheets
A3, B4, Ledger, Legal, 8K: 11 sets
A4R, LetterR: 20 sets
A4, B5,Letter, 16K: 22 sets
When stapling 21 or
30 sheets
A3, B4, Ledger, Legal, 8K: 9 sets
A4, A4R, B5, Letter, LetterR, 16K: 15
sets
When stapling 31 or
50 sheets
A4, A4R, B5, Letter, LetterR, 16K:
9 sets
Stapling capacity
Paper weight 90 g/m2,24lb. Bond
or less
A3, B4, Ledger, Legal, 216 x 340mm, 8K: 25 sheets
Dimensions (W × D × H)
416 × 521 × 275.5 mm
16 3/8 × 20 1/2 × 10 7/8”
Weight
Approx 12 kg/26.4 lb
Specifications are subject to change without notice.

TASKalfa 2550ci-01
July 18, 2012
Page 13 (CDN)
BTU’s
Model
Power
Consumption
PPM
Prints/Hr
Watts
based
on PPM
& Pr/Hr
Watts
based
on PPM
& Pr/Hr
kW/hour
Total BTU
Total
Print
(W)
Total
Ready (W)
Print
Ready
(*3421.14)
2550ci
640
140
25
500
213.3
93.3
0.3067
1046.4
640
140
25
1,000
426.7
46.7
0.4733
1615.1
640
140
25
1,500
640.0
0.0
0.6400
2183.8
Total BTU’s are based on Prints per Minute, Prints per Hour. Watts are based on PPM & Pr/Hr and Kw/Hour.
POWER CONSUMPTION
Specification
Main Body
Voltage requirements
Standard configuration/
No Options
US/Canada
120 V AC 10%, 60Hz 2%, 12A
2550ci
Maximum
1,444W
Copy/Print
640W or less
Low Power Mode
100W or less
Sleep Mode
16W or less
Ready
140W or less
Plug-in mode
0.10W or less
Maximum current
US/Canada
12A
NEMA 5-15R
All Specifications are subject to change without notice.

TASKalfa 2550ci-01
July 18, 2012
Page 14 (CDN)
INSTALLATION REQUIREMENTS
Installation Time
15 Minutes or less (Main Body Only)
Temperature Range
50F ~ 90F (10C ~ 32.5C)
Humidity Range
15% ~ 80%RH
Condensation and
Humidity
Rapid Temperature change, Humidity drift, and condensation should be
avoided
Altitude
Maximum 8202 ft. (2500 meters)
Illumination
Maximum 1,500 lux
Levelness
Maximum levelness: 5mm (0.2inch)
The Printer must be placed on a level and sturdy surface
WEIGHT AND DIMENSIONS
Specification
Width
23 3/8”
Height
27 1/2”
Depth
33 15/16 ”
Weight (Main unit)
95.5 kg / 210.5 lb (with toner containers)
MACHINE SPACE REQUIREMENTS
*All Specifications Subject to Change without Notice.

TASKalfa 2550ci-01
July 18, 2012
Page 15 (CDN)
UTILITIES
Utility
DESCRIPTION
KMnet Admin
KMnet Admin is Kyocera's unified device management
solution that uses a web-based platform to give network
administrators easy and uncomplicated control of all
network enabled printing devices.
KMnet Admin is web-based, so no client software
installation is necessary.
Command Centre RX v1.60
Command Centre RX features allow the user to access
the User Box and carry out operations such as printing
data, sending, and downloading. Download settings can
be changed (such data as format, resolution, colour
mode), data stored inside the Box can be viewed as lists
or thumbnails, or even as an image preview with the
preview image feature.
Other features include automatically updating of screens,
customizing user screens and viewing department &
restriction settings.
FMU v2.0
The File Management Utility (FMU) distributes
documents scanned on a multifunction print system
(MFP) to specified network folders or computers. The
user can set the criteria for distributing the scanned files.
Advanced distribution criteria are available for certain
MFPs.
KM-NET Viewer Ver. 5.2.2528
Administrator Utility, which monitors Kyocera network
devices with the ability to display and report device
conditions via e-mail using SMTP. Accounting functionality
is available.
Quick Set-up Utility v2.0.7
Quick Set-up Utility for Network Administrators used to set-
up IP Printing and Addresses on Network Printers.
KM-NET for Direct Printing
V4.3.2329
Allows Direct Printing of Adobe PDF’s without launching
Adobe’s Acrobat or Acrobat Reader applications.
Barcode Flash Type B/C
Supports Bar Codes
SUPPORTED HyPAS APPLICATIONS
Model
DESCRIPTION
2550ci
SharePoint Connector
Teaching Assistant
Access Lock
Secure Print
Panel Plus
Pinpoint Scan

TASKalfa 2550ci-01
July 18, 2012
Page 16 (CDN)
PRINT DRIVERS
Print Drivers can be downloaded from KDAconnect and kyoceradocumentsolutions.com. Note: Drivers and
Descriptions are periodically updated and versions posted in the future may not match this chart.
Description
Version
Operating System
2550ci KPDL Uni Driver
8.1202
Win XP, 2003, Vista, 2008, 7
2550ci KX Driver v5.3.1219 (32 Bit)
5.3.1219
Win XP, 2003, Vista, 2008, 7
2550ci KX Driver (64 Bit)
5.3.1219
Win XP, 2003, Vista, 2008, 7
2550ci KX XPS Driver (32 Bit)
1.2.2419
Win Vista, 2008, 7
2550ci KX XPS Driver (64 Bit)
1.2.2419
Win Vista, 2008, 7
2550ci Linux PPD
8.1.1202
Linux
2550ci NDPS Driver
5.3.1219
Win XP
2550ci Network Fax Driver (64 Bit)
3.8.2310
Win XP, 2003, Vista, 2008, 7
2550ci Network Fax Driver (32 Bit)
3.8.2310
Win XP, 2003, Vista, 2008, 7
2550ci OSX Installer for 10.4
8.1202
OSX Installer for 10.4
2550ci OSX Installer for 10.5, 10.6, 10.7
8.1202
OSX Installer for 10.5, 10.6, 10.7
2550ci PCL Uni Driver
1.1
Win XP, 2003, Vista, 2008, 7
2550ci Twain Driver
2.0.1515
Twain Driver
2550ci WIA Driver
2.0.1513
WIA Driver

TASKalfa 2550ci-01
July 18, 2012
Page 17 (CDN)
PRODUCT CONFIGURATION
Optional DT-730 not shown
DF-470
AK-470
PF-790
Fax System (W)
IB-50
2550ci
128MB Fax Memory
Card Authentication Kit
B
Keyboard
Data Security Kit (E)
Internet Fax Kit (A)
Stand