2
G2G0 M2000 User Guide
This manual is based on the production version of the Kyocera
M2000 phone. Software changes may have occurred after this
printing. Kyocera reserves the right to make changes in technical
and product specifications without prior notice.
The Kyocera Communications Inc. (“KCI”) products described in
thismanualmay includecopyrighted KCIandthirdpartysoftware
stored in semiconductor memories or other media. Laws in the
UnitedStatesandothercountriespreserveforKCIandthirdparty
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the KCI products may not be modified, reverse
engineered, distributed or reproduced in any manner not
permitted by law.
Furthermore, the purchase of the KCI products shall not be
deemed to grant—either directly or by implication, estoppel, or
otherwise—any license under the copyrights, patents, or patent
applicationsof KCIoranythird partysoftwareprovider,exceptfor
the normal, non-exclusive royalty-free license to use that arises
by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation. Brick
Attack and Race 21 are trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of QUALCOMM
Incorporated.
Openwave is a trademark of Openwave Systems Incorporated.
eZiText is a registered trademark of Zi Corporation. TransFlash is
a trademark of SanDisk Corporation. Bluetooth trademarks are
owned by Bluetooth SIG, Inc. and used by Kyocera
Communications Inc. under license.
All other trademarks are the property of their respective owners.
Copyright © 2010 Kyocera Corporation. All rights reserved.
Ringer Tones Copyright © 2000-2010 Kyocera Corporation.
82-R5604-2EN, Rev. 001
IC Notice
Operationissubjecttothefollowingtwoconditions:(1)thisdevice
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device. The term “IC” before the radio
certification number only signifies that Industry Canada technical
specifications weremet.
• This Class B digital apparatus complies with Canadian
ICES-003.
• Cet appareil numérique de la classe B est confome à la
norme NMB-003 du Canada.
FCC Notice
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation. To maintain compliance with FCC RF
exposure guidelines, ifyou wear a handseton your body, use the
Kyocera Communications Inc. (KCI) supplied and approved
accessory designed for this product. Using accessories that are
not supplied or approved by KCI may violate FCC RF exposure
guidelines.
Otheraccessoriesusedwiththisdeviceforbody-wornoperations
must not contain any metallic components and must provide at
least 15 mm separation distance including the antenna and the
user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RFenergyfor the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards includea
substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
Theexposurestandardforwirelessmobilephonesemploysaunit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.*