2
Luno S2100 User Guide
This manual is based on the production version of the Kyocera
S2100phone. Software changes may haveoccurred after this
printing. Kyocera reserves the right to make changes in
technical and product specifications without prior notice.
TheKyoceraCommunicationsInc.(“KCI”)productsdescribedin
this manual may include copyrighted KCI and third party
software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for KCI
and third party software providers certain exclusive rights for
copyrightedsoftware,suchastheexclusiverightstodistributeor
reproduce thecopyrighted software. Accordingly, any
copyrighted software contained in theKCI products may not be
modified, reverse engineered, distributed or reproduced in any
manner not permitted by law.
Furthermore, the purchase of the KCI products shall not be
deemed to grant—either directly or by implication, estoppel, or
otherwise—any license under the copyrights, patents, or patent
applications of KCI orany third party softwareprovider, except
for the normal, non-exclusive royalty-free license to use that
arises by operation of law in the sale of a product.
Kyoceraisaregisteredtrademarkof KyoceraCorporation. Brick
Attack and Race 21 are trademarks of Kyocera Wireless Corp.
QUALCOMMis a registered trademark of QUALCOMM
Incorporated.
Openwave is a trademark of Openwave Systems Incorporated.
eZiText is a registered trademark of Zi Corporation. TransFlash
is a trademark of SanDisk Corporation. Bluetooth trademarks
are owned by Bluetooth SIG, Inc. and usedby Kyocera
Communications Inc. under license.
All other trademarks are the property of their respective owners.
Copyright © 2011 Kyocera Corporation. All rights reserved.
Ringer Tones Copyright © 2000-2011 Kyocera Corporation.
82-A6238-1EN, Rev. 001
IC Notice
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesiredoperationofthedevice.Theterm“IC”beforetheradio
certificationnumberonlysignifiesthatIndustryCanadatechnical
specifications were met.
• This Class B digital apparatus complies with Canadian
ICES-003.
• Cet appareil numérique de la classe B est confome à la
norme NMB-003 du Canada.
FCC Notice
This device complies with part 15of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
causeharmfulinterference,and(2)Thisdevicemustacceptany
interference received, including interference that may cause
undesired operation. To maintain compliance with FCC RF
exposure guidelines, if you wear a phone on your body, use the
Kyocera Communications Inc. (KCI) supplied and approved
accessory designed for this product. Using accessories that are
not supplied or approved by KCI may violate FCC RF exposure
guidelines.
Other accessories used with this device for body-worn
operations must not contain any metallic components and must
provide at least 15 mm separation distance including the
antenna and the user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designedandmanufacturedtonotexceedtheemissionlimitsfor
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energyfor the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include