Kyocera URBANO L01 Service manual

Introduction
Setting Guide
Basic operation
For detailed operation method, refer to "Basic Manual".
FPower key
Power ON
Press and hold Ffor over a second.
Unlocking
Slide [ ] up to unlock.
Slide [ ]/[ ] up to activate the "Talk now"/"Camera".
[ ] Simple menu
Display the Simple menu. Set "Simple menu setting" to "OFF" to display applications
list.
MMenu key
Display function (menu) corresponding operations.
HHome key
Display the Home screen or use for canceling sleep mode.
CBack key
Tap to return to the previous screen.
Display
Operate directly touching with your finger.
Tap
Lightly touch a screen and
then immediately release
your finger.
Long-touch
Keep touching an item or
key.
Flick
Quickly move (flicking)
your finger up, down, right,
or left.
■Character entry
Enter character by flick input or tapping key repeatedly.
Flick input
Long-touch a key to display input candidates
for flick input as right screen. Flick to the
direction of character to enter.
《Character entry screen (10-key)》
Character entry mode switch key
Tap to switch character type.
Initial settings
The first time the product turns ON, "au かんたん設定 (au Easy Setting)" activates automatically. Press Ctwice and then from the Home
screen →[ ( シンプル (Simple))] →[ 設定 (Settings)] →[ (All)] →[ 言語と入力 (Language & input)] →[ 言語 (Language)]
→"English" to switch language, then set au Easy Setting. From the Home screen →[ (Simple)] →[Apps] →[au Easy Setting].
• If you skip the operation of "au かんたん設定 (au Easy Setting)" when you purchased the product, you can set au ID later. In that case,
Applications list →Tap "au かんたん設定 (au Easy Setting)" or "au ID 設定 (au ID setting)".
■au ID Setting
By setting au ID, you can use various services provided by au such as "au Kantan Kessai" which allows you to purchase applications from
the au スマートパス (au Smart Pass) or Google Play. Main setting items as follows.
au ID* Register your au phone number or any character string for au ID (user ID).
au ID password Register password for using au ID.
* Username which is already used by another user cannot be set.
1 2 3 4 5
au Easy Setting screen
→[Next]
[Registration] Check the contents,
then [OK]
[au ID の設定・保存
(Set/save au ID)]
Enter a security password
→[OK]
Default value is four-digit security
code written at subscription of
communication service.
6
* Registering new au ID
except phone number:
Newly register from
[お好きな au ID を新
規登録したい方はこち
ら(New registration of
au ID)]
* Registering your au
ID: Set from [au ID を
お持ちの方はこちら
(Register your au ID)]
7 8 9
Enter au ID password,
[利用規約に同意して新
規登録 (Agree terms of
service and register)]
[設定画面へ
(Go to setting screen)]
Register information
necessary for re-issue of
password.
Enter " 生年月日 (Date
of birth)", " 秘密の質問
(Secret question)", " 答
え(Answer)" →[ 入力完了
(Done)] →[ 設定 (Set)]
[終了 (Done)]
10 11 12 13 14
Check the terms and
conditions (reading
required), then
[Accept] →[Next]
When "Accept" for "To back
up your address book."
is selected, Friends Note
activates.
Check the terms and
conditions (reading
required), select
"Accept" →[Next]
Check the terms and
conditions (reading
required), select
"Accept" →[Next]
[Finish] [Next]
15 16 17 18 19
Confirm contents, then
[Next]
Select a character
size →[OK]
[Set] Enter settings →[OK] [Completed]
Setting up Google account
Set up Google account to use Google applications such as "Gmail", "Play Store", "Google Talk". Setting items are as below (Require
registration of "First" name, "Last" name, "Security question and Answer" besides the items below).
User name Register your Google account (user ID) and any character string for mail address. You can register a desired
name, but a registered name by another user cannot be set.
Password Register password for the Google account.
1 2 3 45
On the Google account
setting screen →[New]
If you have Google
account, tap "Existing".
Enter "First" name and
"Last" name →[ ]
Enter a user name →[ ]
Checking registration of
username starts.
Enter a password, and
reenter the password for
confirmation →[ ]
Enter question and
answer when you forgot
the password, spare mail
address* →[ ]
* If you have no another mail
address, remain as blank.
6 7 8 9 10
Select if you join Google+
Tap "Not now" to go to the
next.
Check the contents,
then [ ]
Enter text displayed on
screen →[ ]
* This screen may not be
displayed.
Make purchase
settings of Google
Play as required
Confirm the back up
setting and [ ]
Google account registration
is completed.
* This screen may not be
displayed.
E-mail
To use E-mail (@ezweb.ne.jp), subscription to LTE NET is required.
If you did not subscribe it when you purchased the product, contact an au shop or Customer Service Center.
Your E-mail address is determined automatically after initial setting. You can change the E-mail address later.
■Initial settings
1 2 3
After E-mail initial
settings, your E-mail
address appears.
Check E-mail address
and tap [ 閉じる
(Close)].
Home screen
→[ (メール (Mail))]
→[ (E-mail)]
Check the contents,
then [ 接続する
(Connect)]
■Changing your e-mail address
1 2 3 4 5
Home screen
→[ (メール (Mail))]
→[ (E-mail)]
M→[E-mail settings] [Other settings]
→[ 接続する (Connect)]
[E メールアドレスの変更
(Change E-mail address)]
Enter the security
code →[ 送信 (Send)]
6 7
Check the contents, then
[承諾する (I accept)]
Enter E-mail
address →[ 送信
(Send)] →[OK]
Thank you for buying the "URBANO" (simply called the "product" from here on). In this guide, settings and precautions for using
the product are described.
For explanations of basic functions, refer to "Basic Manual".
■Basic operation
Describes the basic operations.
■Initial settings
Make initial settings when you turn the
power on for the first time.
■Setting up Google account
Describes how to set up Google
account.
■E-mail
Make initial settings for @ezweb.ne.jp
etc.
■Making a call
Describes how to make a call.
■Receiving a call
Describes how to receive a call.
■Setting Wi-Fi®
Describes how to connect Wi-Fi®
network.
■Viewing/playing data
Describes how to view/play still images
or video data.
■Infrared communication
Describes how to send/receive data
between the product and another
device using infrared communication
function.
■Saving battery power
Describes how to set for saving battery
consumption using "E-saving settings".
Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies.
The TM, ® marks may be omitted in this manual.
Screen illustrations shown in this manual may look different from the actual screens. In some cases, minor details or a part of a screen may be omitted.
May2013,1stEdition
Soldby:KDDICORPORATION,
OKINAWACELLULARTELEPHONECOMPANY
Manufacturedby:KYOCERACorporation

■Backing up E-mail
You can back up E-mail.
Backed up data is saved on a microSD™ memory card (/storage/sdcard1/private/au/email/BU/) when a microSD™ memory card is
attached. If a microSD™ memory card is not attached, data is saved on the internal storage (/storage/sdcard0/private/au/email/BU/).
1 2 3 4 5
Home screen
→ [ ( メール (Mail))]
→[ (E-mail)]
M→[E-mail settings] [Backup/Restore] [Backup] →[OK] Select a folder to
back up →[OK]
PC-mail settings
You can use mail addresses except for E-mail (@ezweb.ne.jp).
You need to set up a PC-mail account to use PC-mail. For the first time use, make settings as follows.
Applications list →[PC mail] →Enter Email address and password →[Next] →Set account →[Next] →Enter
account name etc. →[Next]
Making a call
■Direct input calling ■Making a call from incoming/outgoing history
1 2 1 2
Home screen
→[ ] (Phone)
Enter a phone number
→[ ] (Call)
Phone number input
screen →[ ]/[ ]
[ ] of a party to
call
■Calling from a contact
1 2 3
Phone number input
screen →[ ]
Tap a party to call [ ]
Receiving a call
■Calling
1 2 3
Receiving screen
→Drag [ ] right
Start calling To end the call, [ ] (End)
■Answering with answering memo
Answer by the answering memo message and record a message of the party when you cannot answer calls.
1 2 3 4
Receiving screen →M[Reply Auto
answering]
The caller hears the
guidance
To answer the call,
drag [ ] right
Setting Wi-Fi®
Use your home Wireless LAN (Wi-Fi®) or public wireless LAN to connect internet.
Main settings are as follows.
AOSS™ system Use for registration of access point with AOSS™ mark such as AirStation™ of BUFFALO™.
WPS system Use for registration of access point compatible with Wi-Fi Protected Setup™ with WPS mark.
au Wi-Fi 接続ツール
(au Wi-Fi connection tool)
Use for registration of access point compatible with " かんたん接続 (Easy access)".
Others Use for registration of access point with Rakuraku WLAN Start.
* If you turn on wireless LAN (Wi-Fi®) function, battery consumption increases. You are recommended to turn wireless LAN (Wi-Fi®) function to OFF
when not using wireless LAN (Wi-Fi®) function.
1 2 3 4
Simple menu/Applications
list
→[Settings]
[ ] [Wi-Fi]
Available Wi-Fi networks are
detected automatically and
the SSIDs appear in the Wi-
Fi networks.
[EASY SETUPS]
When access point is not detected, tap
[ ] to add access point manually.
■Using AOSS™ system access point
5 6 7
Keep pressing AOSS
button of access point
to set to AOSS mode.
An access point is
automatically detected
and registration starts.
[AOSS settings]
If terms of use appear,
confirm the contents and
then tap "Agree".
[ ]
■Using WPS system access point
WPS button WPS Pin Entry
5 6
Keep pressing WPS
button of access point
to set to WPS mode.
An access point is
automatically detected
and registration starts.
5 6
Enter displayed PIN
code for access point,
then registration starts.
[WPS button] [WPS Pin Entry]
■Using au Wi-Fi 接続ツール (au Wi-Fi connection tool)
5 6 7
Keep pressing the
access point button
until it blinks. An access
point is automatically
detected and
registration starts.
[Easy Setting(HOME)] Confirm on
sending personal
information →[OK]
Viewing/playing data
By transferring data from the previously used au phone to a microSD™ memory card, you can view/play* the data such as still images or
movies using "File Gallery" in the product.
* Copyrighted data on the previously used au phone cannot be transferred to the product. However, some 着うたフル ®, ビデオクリップ , 着うたフル
プラス ®may be able to be transferred and played on the product with the same phone number by backing up with LISMO Port Ver 4.2 or later.
12
Simple menu/
Applications list
→[File Gallery]
Tap a category and tap a
data to be displayed
Data is played
Infrared communication
You can send/receive profiles or various data between the product and another device using infrared communication.
■Receiving data
1 2
Simple menu/
Applications list
→[Infrared com.]
[Receive]
When authentication code
entry window appears, enter
authentication code (four
digit number) →[OK].
■Sending data
1 2 3
Simple menu/
Applications list
→[Infrared com.]
[Send profile]/[Send
contacts]/[Send file]
If you tap "Send profile",
data transfer begins.
Select a data item
to send →[OK]
Saving battery power
Use "E-saving settings" to set screen timeout or screen brightness to the minimum value or to set screen orientation, Wi-Fi®, Bluetooth®,
GPS satellites, Live Wallpapers, Reader/Writer, P2P, Pedometer and All data communication to "OFF" so that you can save the battery
power. When battery power is low, standby time can be extended by setting All data communication to "OFF".
1 2
Simple menu/
Applications list
→[E-saving settings]
[OFF]/[My e-saving]/
[E-saving]