Kyocera MPR-9800 User manual

MPR-9800
PHOTOVOLTAIC – HYBRID
POWER SYSTEM CONTROLLER
Medium Size Systems
THE MPR-9800 PV CONTROLLER is your TOTAL PV controller solution for your
telecommunication, residential and hybrid power needs. TOTAL because we put the
most advanced and innovative features in our basic to advanced controller systems.
The MPR-9800 addresses the TOTAL needs of your batteries as well as your loads.
THE MPR-9800 provides dramatically reduced maintenance costs as well as increased
survivability at your sites.
Kyocera Solar, Inc. provides complete turn-key power system controllers.
Features
•Communication via RS232 Serial Interface
•Advanced MPR-9800 modular Micro-Processor
control circuitry to allow flexible controller
configurations
•PV power from 35 to 200 amps at 12, 24, 36
and 48VDC
•Two channel subarray staged taper charge
•Pulse finish charge
•PV equalizations
•Advanced charging algorithms, EBBM™
•Temperature compensated
•Generator control, Start/Stop voltages
•Load control up to 60 amps
•Complete monitoring capabilities
•Battery voltage, PV and Load currents,
date and time, Battery and controller temperatures
and all control channel conditions
•LED’s - Load, PV, LVA, HVA and GEN
•LCD for viewing monitored paramters
•Alarm relays, form C voltage free
•System Safety
• Reverse polarity protected
• Transient voltage protection
• Circuit breakers on arrays and Loads
•NEMA 4X enclosure
•Remote communications option
•MAIN battery disconnect option
•Two year limited warranty

MPR-9800
Remote Communication
The MPR-9800 can be equipped with an optional 14,400 baud MODEM which will allow
the user to dial the remote site's MPR using our MPRCOMM software package OR
communications can be accomplished via the RS232 serial interface through your
communication equipment to retrieve the system’s status. This provides a user-friendly
interface to our controllers via your personal computer. This option is one of the most
valuable features the MPR series has to offer. This communication package allows you
to fully monitor and control your system as if you were physically at the site. Imagine the
money and time that will be save by not having to travel to your remote power system!
Communication Software
KSI’s new Visual Basic software package will enable the user to communicate with the
MPR-9800 locally or remotely, using Windows 95 and 98 platforms.
The user-friendly interface allows all system parameter to be monitored and all set points
and controls to be changed.
Specifications
•Voltage: 12 to 48VDC, Neg. or Pos. Gnd
•Array current: Up to 200 amps
•Load current: Up to 60 amps
•Parasitic load: 30 mA
•Analog inputs: 4
•Digital inputs: 1
•Digital outputs: 6
•Resolution: 8 bit
•Temperature: -40°C to 85°C
•NEMA 4X enclosure 16 in. X 14 in.
•Maximum wire sizes
•Battery: 2/0
•Arrays: 1/0
•Loads: 1/0
•Control wire: 14 AWG
•LCD: 2X24 -20°C to 70°C
•Five LED’s
•LVA, HVA and GEN form C output contacts
•UL listed DC rated at 125VDC circuit breakers
Standard MPR-9800 Power Components
Standard MPR-9800 Instrument Panel
7812 EAST ACOMA DRIVE
SCOTTSDALE, AZ 85260 USA
480/948-8003 • 800/223-9580
FAX: [phone]
www.kyocerasolar.com
e-mail: [email protected]