KYOWA KW-6546 User manual

KYOWA SERVICE CENTER
RM. 1203 STATE CENTER BUILDING
#333 JUAN LUNA ST, BINONDO
MANILA, PHILIPPINES
INDUSTRIAL STAND FAN
MODEL NO: KW-6546
Voltage: 230V a.c. 60Hz Power: 65 WATTS
INSTRUCTION MANUAL

HOW TO ASSEMBLE
1. Remove 4 screws from the BASE.
2. Position the PIPE STAND on top of the BASE and put back the screws.
3. Loosen the JOINT KNOB a little and pull the INNER PIPE up from the OUTER PIPE,
and tighten the JOINT KNOB.
4. Mount the MOTOR ASSEMBLY to the INNER PIPE and tighten the LOCK SCREW.
5. Mount the BACK GRILLE on the MOTOR ASSEMBLY by aligning the holes on the
guide.
6. Tighten the GUARD LOCK.
7. Insert the BLADE into the SHAFT. Tighten the SCREW provided for the blade.
8. Clip the FRONT GRILLE to the BACK GRILLE.
Please handle metal blade with extra care. Hold at the center
as you assemble.
CLEAN AND CARE
Carefully wash movable parts of the Industrial Stand Fan with water and mild
detergent.
Avoid any kind of liquid to seep into the motor of the unit.
Avoid using harsh or abrasive cleaning materials when cleaning.
Wipe dry Industrial Stand Fan with a soft and dry cloth.
Put back parts and accessories of the Industrial Stand Fan to their proper position
before operating again.
SERVICE
Do not operate your KYOWA Industrial Stand Fan if the unit malfunctions or
appears damaged in any manner. Bring the complete product to the place of
purchase or to any authorized KYOWA dealers for inspection, repair or
replacement.
Do not disassemble your KYOWA Industrial Stand Fan by yourself. No user
serviceable parts inside. Refer all needed repair to an authorized KYOWA service
facility ONLY.
IMPORTANT SAFEGUARDS
Always operate your KYOWA Industrial Stand Fan from a power source of the same
voltage and frequency rating as indicated on the rating label.
Do not operate or place any part of your Industrial Stand Fan on or near any hot
surface such as a gas or electric burner, hotplate or heated oven.
Do not operate the Industrial Stand Fan if any part of it has been damaged. Return
the appliance to the nearest authorized dealer or service facility for repair.
Do not use or replace accessories of the Industrial Stand Fan, other than the ones
originally provided.
Switch OFF and unplug the Industrial Stand Fan from outlet when not in use or
before cleaning.
Always turn setting controls to OFF before disconnecting the cord from the power
supply. Hold plug when unplugging from socket. Do not unplug by pulling the
supply cord.
To reduce the risk of electric shock, do not immerse or expose the Industrial Stand
Fan to rain, moisture or any liquid.
Keep out of reach from children or from persons with mental or physical disabilities.
PARTS DESCRIPTION