KYOWA KW-4655 User manual

KYOWA SERVICE CENTER (MAIN)
RM. 1203, STATE CENTER BLDG, #333 JUAN LUNA ST, BINONDO MANILA
TEL: [phone]
METRO MANILA
TRONIX - QUEZON CITY (MAIN) #777 N.S. AMORANTO ST, COR. STO. DOMINGO AVE,
Q.C.
TEL: [phone] MOBILE: [phone]
TRONIX - MANILA #1793 CONCEPCION AGUILA ST, NEAR J.P. LAUREL ST, SAN
MIGUEL, MANILA (NEAR
MALACAÑANG)
TEL: [phone] MOBILE: [phone]
TRONIX - STA. CRUZ #910 LUZON ST. (BET. MASANGKAY & BENAVIDEZ ST.) STA.
CRUZ, MANILA
TEL: [phone] MOBILE: [phone]
TRONIX SAN JUAN #135 N.DOMINGO ST, CORNER PINAGLABANAN, BRGY. BALONG
BATO, SAN JUAN CITY
TEL: [phone] MOBILE: [phone]
TRONIX - ALABANG TOWN CENTER LA-7 SERVICE TOWN, ALABANG TOWN CENTER,
MUNTINLUPA CITY
TEL: [phone] MOBILE: [phone]
TRONIX - PARAÑAQUE #103 CMSR BLDG, PHASE 1, 88 PRESIDENT AVENUE, BF
HOME, PARAÑAQUE
TEL: [phone] MOBILE: [phone]
TRONIX - MARIKINA #37 BAYAN-BAYANAN AVE, CONCEPCION, MARIKINA
TEL: [phone] MOBILE: [phone]
TRONIX SHAW - MANDALUYONG #412 SHAW BLVD, COR. TORRES & CALDERON ST,
MANDALUYONG CITY
TEL: [phone] MOBILE: [phone]
PRECISION ELECTRONICS - VALENZUELA #95 STALL #2 MAC ARTHUR HIGH WAY
MARULAS, VALENZUELA
TEL: [phone] MOBILE: [phone]
TARLAC
TARLAC MAC ENTERPRISES INC. BLK. 9, MCARTHUR HIGHWAY, SAN NICOLAS, TARLAC
TEL: [phone] MOBILE: [phone]
OLONGAPO
OBP TRADING. 13 GORDON AVENUE PAG-ASA OLONGAPO CITY
TEL: [phone] MOBILE: [phone]
TEL: [phone] MOBILE: [phone]
BAGUIO
JCF ELECTRONICS REPAIR SHOP. 322-A LOWER MAGSAYSAY BAGUIO CITY
TEL: [phone] MOBILE: [phone]
CATANDUANES
TARLAC MAC ENTERPRISES INC. SAN ROQUE SAN ANDRES, CATANDUANES
TEL: [phone] MOBILE: [phone]
TACLOBAN
ELECTRONICS CITY AND SERVICE CENTER, INC. RIZAL AVE., EXTN., BRGY. 42, TACLOBAN
CITY
TEL: [phone] MOBILE: [phone]
ALBAY
JO-ADEL ELECTRONICS REPAIR SHOP PI-02 SAINT ANTHONY ST., SAN JUAN, TABACO
CITY ALBAY
MOBILE: [phone]
CALBAYOG
JOVAN APPLIANCE SERVICE CENTER BRGY. OBRERO, CALBAYOG CITY
MOBILE: [phone]
BACOLOD
WESTERN ELECTRONICS Western Electronics door 9-12 Migant Center Cor. Burgos Locsin St.,
Bacolod City
TEL: [phone] MOBILE: [phone]
CEBU
MARKWELL ENTERPRISES #85 SIKATUNA ST, CEBU CITY
TEL: [phone] MOBILE: [phone]
BIO PLUS ELEC. REPAIR CENTER C. PADILLA ST, SAN ROQUE, MAMBALING, CEBU CITY
TEL: [phone] MOBILE: [phone]
DAVAO
KOOL EXPRESS DOOR 5, LUA BLDG, QUIRINO AVE, DAVAO CITY
TEL: [phone] MOBILE: [phone]
ILOILO
NACES APPLIANCE CORPORATION NACES BLDG, #10 DELGADO ST, ILOILO
TEL: [phone] MOBILE: [phone]

FOOD PROCESSOR
MODEL # KW-4655
Voltage: 230Va.c. 60Hz Power: 500 WATTS
INSTRUCTION MANUAL
CONGRATULATIONS
You are now a proud new owner of a KYOWA Food Processor model
no. KW-4655.
Before using for the first time, kindly take time to carefully read your
instruction manual. Please observe all safety precautions and follow
operating procedures. After reading, kindly store your instruction manual in
a safe place for your future reference. Should you pass on this Food
Processor to a third party, please hand over this instruction manual as well.
PARTS DESCRIPTION

IMPORTANT SAFEGUARDS
When using the Food Processor, basic safety precautions should always be followed:
Always operate your KYOWA Food Processor from a power source of the same
voltage and frequency rating as indicated on the rating label.
Do not place the unit on uneven surfaces. Place upon a flat area surface and far
from the edge of counter top.
Do not use Food Processor in damp or wet area. Keep dry the motor unit of the
Food Processor.
Do not operate the Food Processor if any part of it including its power supply cord
has been damaged. Return the appliance to the nearest authorized service facility
for repair.
Do not operate or place any part of your KYOWA Food Processor on or near any
hot surface such as a gas or electric burner, hotplate or heated oven.
Do not use or replace accessories other than the ones originally provided.
Always secure Food Processor container and motor into place before operating the
unit.
Always ensure that the cover is tightly closed while the Food Processor is in
operation.
While operating, hold to support Food Processor body to avoid any untoward
incidents.
Use a spatula to push or mix foods to be processed inside the Food Processor.
Never use your finger to remove food from the Food Processor.
Always remove blade from the Food Processor before scooping out food from the
container.
Do not overload Food Processor by putting too much food on the container
exceeding the line indicated on the Food Processor container.
Food Processor must not be used exceeding 1 minute at stretch. Allow Food
Processor to rest for about a minute before operating again.
Wait until the Food Processor has completely stopped processing before removing
cover from the Bowl.
Switch OFF and unplug the Food Processor outlet before emptying, when not in
use or before cleaning.
Hold plug when unplugging from socket. Do not unplug by pulling the supply cord.
To reduce the risk of electric shock, do not immerse or expose the Food Processor
to rain, moisture or any liquid.
Keep out of reach from children or from persons with mental or physical
disabilities.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
This KYOWA Food Processor is intended for normal domestic/household use only.
This unit is not suitable for commercial use.
HOW TO USE
CHOPPING BLADE
1. Position Driver on the Motor Base.
2. Put Bowl over the Driver; turn clockwise until the bowl is firmly locked
in place.
3. Place Blade Adaptor on the Driver.
4. Place Chopping Blade on the Blade Adaptor.
5. Put the food to be processed on the bowl.
6. Pre-slice onions and other rounded hard fruits and vegetables into
quarters before loading into the bowl.
7. Place Cover into the bowl; rotate clockwise until the cover is firmly
locked in place otherwise, the unit will not operate.
8. Select the required speed for the food that you are processing or turn
and hold to Pulse setting for controlled cycle operation.
9. Chopping size and texture depends on how long you process food. If
you want coarse texture, process for at least 5 seconds; 10 seconds
and up if you want finer food texture.
SLICING AND SHREDDING BLADES
1. Position Driver on the Motor Base.
2. Put Food Bowl over the Driver; turn clockwise until the bowl is firmly
locked in place.
3. Attach required blade into the Blade Holder.
4. Fix blade and blade holder assembly into the Driver.
5. Place Cover into the bowl; rotate clockwise until the cover is firmly
locked in place otherwise, the unit will not operate.
6. Select the required speed for the food that you are processing or turn
and hold to Pulse setting for controlled cycle operation.
7. Insert food to be sliced or shred into the food chute.
8. Push food into the blades by using the plunger.
DRY MILL
Put ingredients to be processed in the dry mill cup.
Attach dry mill blade assembly into the cup then turn clockwise until it is
locked in place.
Place dry mill assembly on the motor base.
Select required speed for the food you are going to process.

Allow dry mill to process for about 10 seconds then turn OFF. Allow to rest for
a couple of seconds then turn ON again.
Repeat process until food is well milled.
BLENDER
1. Fix blender pitcher into the Motor Base by rotating clockwise until it
locks in place.
2. Wash food to be processed in the blender then cut into small pieces
not larger than 1 inch.
3. Secure blender pitcher with the cover.
4. Select the required speed for the food that you are processing or turn
and hold to Pulse setting for controlled cycle operation. Pulse and Level
2 Speed Setting may be used for solid food ingredients, while Speed
Level 1 may be used for liquid ingredients only.
CLEAN AND CARE
After every use, wash movable parts of the Food Processor including the
container, blade and lid with warm, soapy water.
Never immerse Food Processor motor in water. Clean motor housing by
wiping with a soft and damp cloth.
Never use abrasive cleaning agents or any metallic and sharp objects
(e.g. scrubbing brush or knife) for cleaning.
Wipe dry all parts of the Food Processor using a soft and dry cloth.
Put back parts and accessories of the Food Processor to their proper
places before operating again.
Store Food Processor in a cool and dry place.
SERVICE
Do not operate your KYOWA Food Processor if the unit malfunctions or
appears damaged in any manner. Bring the complete product to the place
of purchase or to any authorized KYOWA service centers for inspection,
repair or replacement.
Do not disassemble your KYOWA Food Processor by yourself. No user
serviceable parts inside. Refer all needed repair to an authorized KYOWA
service facility ONLY.