L.A.Sports 50056E User manual

SUPER LIGHTWEIGHT ALUMINIUM
RUNNING / BALANCE BIKE
Assembly Instructions
Model No. 50056E
WWW.BODYSCULPTURE.CO.UK

PARTS LIST
Before assembly, please find a flat
surface and take out all the parts. Please
check all the parts are included. Take
care not to scratch any of the parts.
Here are the names of the parts of the Super Lightweight Aluminium Running/Balance Bike:
PARTS PHOTO
DESCRIPTION
QTY
Front Fork & Front Wheel
1
Main Body & Rear Wheel
1
Front Fork Plug
1
Holder Protection
2
Retaining Clip
2
T-Bar
1
Saddle
1
Wrench
1
Allen key
1

Congratulations on buying your LA Sports Super Lightweight Aluminium Running / Balance Bike.
Balance bikes do not have pedals. Children use their feet to maintain balance and to push themselves
off. The bikes are easy to ride, bags of fun and are perfect for those who aren't ready for pedals just
yet. Balance bikes develop motor skills, spatial awareness, balance, agility, core strength and co-
ordination. They also help to increase and maintain children's confidence as they are in control of the
bike. All this and not a stabilizer in sight! Our Balance Bike is also so Super Lightweight, your child will
be able to lift and carry it to where they want.
Start by asking your child to stand over the bike, with the saddle under their seat. Both feet should be
on the ground, and both hands on the handlebar grips. Start by walking along and keeping their
balance with their feet. When they want to stop, just stop walking. As they progress, encourage larger
steps, and start saying “Push, Push Glide” and they will start to glide along. They will naturally want to
push a little more and let the bike glide along under them.
Step 1
Take the Main Body and Front Fork.
Insert the Front Fork Plug into the underneath
of the front tube as shown.
Slide the front fork into the main frame as
shown.
Step 2
Fit the Holder Protection and Retaining Clip to the
handlebar T-Bar as shown.
Insert the T-Bar into the main frame as shown.
Make sure the Holder Protection covers the Retaining Clip.

Step 3
Fit the Holder Protection and Retaining Clip.
Attach both parts to the Saddle as shown.
Slide the Saddle into the frame as shown.
Adjust the height by loosening the Allen Key
to secure the screw on the Retaining Clip.
Make sure the Holder Protection covers the
Retaining Clip.
Attention!
IMPORTANT SAFETY INFORMATION
When you adjust the height of the saddle, make sure the “stripe marks”
are hidden inside the frame. If you can see the “stripe marks”, the saddle
needs to be lowered to be safe to use.
Step 4
Your assembly is complete.
Before use, please make sure all screws and components are securely fastened, and regularly check
they are tight before use.
Clean the bike with warm soapy water and dry before storing in a clean dry place.
QUERIES? – PLEASE VISIT WWW.BODYSCULPTURE.CO.UK AND WE WILL BE PLEASED TO HELP