L-Acoustics P1 User manual

P1
user manual (EN)

Document reference: P1 user manual (EN) version 2.1
Distribution date: October 19, 2018
© 2018 L-Acoustics. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means without the
express written consent of the publisher.

Contents
Safety................................................................................................................................................................ 6
Important safety instructions....................................................................................................................... 6
Symbols................................................................................................................................................... 7
System components.............................................................................................................................................9
Technical description......................................................................................................................................... 10
Main features......................................................................................................................................... 10
Internal components.......................................................................................................................10
Front and rear panels....................................................................................................................10
Signal processing....................................................................................................................................11
Signal inputs.................................................................................................................................11
Measurement and tuning............................................................................................................... 11
DSP architecture............................................................................................................................12
Signal outputs............................................................................................................................... 13
Power supply..........................................................................................................................................13
Monitoring and control............................................................................................................................13
User interface............................................................................................................................... 13
L-NET remote control network......................................................................................................... 13
Preventive maintenance..................................................................................................................................... 14
CHK - External structure...........................................................................................................................14
CHK - Network functionalities and rmware.............................................................................................. 14
Installation........................................................................................................................................................15
Mounting................................................................................................................................................15
Ventilation.............................................................................................................................................. 15
Connecting to AC mains......................................................................................................................... 16
Electrical specications.................................................................................................................. 16
Power cord...................................................................................................................................16
Plugging to AC mains................................................................................................................... 16
Power consumption........................................................................................................................16
Audio and network cabling..................................................................................................................... 17
Connection panels.........................................................................................................................17
Cabling example...........................................................................................................................19
General Purpose I/O (GPIO)................................................................................................................... 20
Operation........................................................................................................................................................ 21
Powering on/off..................................................................................................................................... 21
Parameters accessible only from LA Network Manager...............................................................................21
3

Using the interface..................................................................................................................................22
Unlocking the display..............................................................................................................................22
Using the main screen.............................................................................................................................23
Conguration information...............................................................................................................23
DSP indicators.............................................................................................................................. 23
IP address.................................................................................................................................... 24
Level meters and mute................................................................................................................... 25
Time-alignment.............................................................................................................................. 26
Automatic input fallback................................................................................................................ 27
Using the input/output pages...................................................................................................................30
Stacked views...............................................................................................................................32
Mute............................................................................................................................................ 32
Gain............................................................................................................................................ 33
Polarity.........................................................................................................................................34
Signal status (AES and AVB)..........................................................................................................34
Mapping (AVB).............................................................................................................................37
Mic/Line settings...........................................................................................................................38
Media Player (MPL).......................................................................................................................39
Generator.....................................................................................................................................41
DSP (BUS and CUE)......................................................................................................................42
Source selection............................................................................................................................ 46
Using the menu...................................................................................................................................... 47
Congurations...............................................................................................................................48
Media Clock.................................................................................................................................54
Monitoring & Info......................................................................................................................... 55
Options........................................................................................................................................ 58
Identifying the processor..........................................................................................................................63
Maintenance.................................................................................................................................................... 64
Introduction.............................................................................................................................................64
Presentation.................................................................................................................................. 64
Equipment and tools......................................................................................................................64
Troubleshooting and diagnosis................................................................................................................. 65
Power issues................................................................................................................................. 65
Interface issues..............................................................................................................................65
Network issues..............................................................................................................................66
Error messages............................................................................................................................. 66
Sound issues.................................................................................................................................67
Exploded view........................................................................................................................................69
Disassembly and Reassembly procedures.................................................................................................. 70
D/R - Encoder wheel knob............................................................................................................ 70
4

Specications................................................................................................................................................... 71
General................................................................................................................................................. 71
Interface and connectors..........................................................................................................................71
Inputs and outputs...................................................................................................................................72
Signal processing....................................................................................................................................75
P1 Sensor.............................................................................................................................................. 75
Remote control........................................................................................................................................75
Physical data..........................................................................................................................................76
Appendix.........................................................................................................................................................77
Glossary................................................................................................................................................ 77
List of AVB reservation errors...................................................................................................................77
Licenses and copyrights........................................................................................................................... 79
Approvals...............................................................................................................................................80
5

Safety
Safety
Important safety instructions
Verify the electrical conformity and compatibility of the mains supply.
Only connect the product to an AC power outlet rated 100-240 V, 50-60 Hz.
The product draws 27 W (typical).
WARNING: The product is of CLASS 1 construction and shall be connected to a mains socket outlet with a
protective connection to earth.
When the product is used in a three-phase circuit, verify the electrical conformity and
compatibility of the three-phase circuit.
Verify that the three phases work, and balance the loads between the three phases.
Verify that the neutral and earth work.
Never try to emulate a 230 V circuit connecting an apparatus to two live wires of a 120 V three-phase circuit.
Never try to emulate a 200 V circuit connecting an apparatus to two live wires of a 100 V three-phase circuit.
Electrical generator
You must power on the generator before powering on the product.
Verify that the product is turned off before powering on the generator.
To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects
lled with liquids, such as vases, should not be placed on this apparatus.
Never incorporate equipment or accessories not approved by L-Acoustics.
Read all the related PRODUCT INFORMATION documents shipped with the products before
exploiting the system.
Inspect the product before operation.
If any sign of defect or damage is detected, immediately withdraw the product from use for maintenance.
This product is intended for use by trained personnel.
Do not use the product outside its operating temperature range.
The product operates at a room temperature between 0 °C / 32 °F and 50 °C / 122 °F.
Do not expose the product to direct sun.
Only use the product in a conformed electro-magnetic environment.
Conformed environments are: E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio), E5 (heavy industrial), as per EN55103-2 standards.
Avoid radio interference.
This product has been tested and complies with the limits indicated in the EMC directive (Electro Magnetic
Compatibility). These limits are designed to provide reasonable protection against harmful interference from
electrical equipment, but it cannot be guaranteed that interference will never occur.
Read the maintenance section of this document before servicing the product.
Shipping
Use the original packaging for shipping the product, unless it is mounted in a rack with the front xed to the rack,
as described in this manual.
6 P1 user manual (EN) version 2.1

Safety
Explanation of graphical symbols
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of
sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance instructions in the literature accompanying the product.
Symbols
The following symbols are used in this document:
This symbol indicates a potential risk of harm to an individual or damage to the product.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of
the product.
This symbol indicates a potential risk of electrical injury.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of
the product.
This symbol noties the user about instructions that must be strictly followed to ensure proper installation or
operation of the product.
This symbol noties the user about complementary information or optional instructions.
Do not open unless authorized.
This symbol indicates the presence of electrical shock hazards.
It also indicates that no maintenance performed by the end user requires access to internal components.
P1 user manual (EN) version 2.1 7

Welcome
Welcome
Thank you for purchasing the P1.
This document contains essential information on using the system properly.
As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to
change the specications of its products and the content of its document without prior notice. Please
check www.l-acoustics.com on a regular basis to download the latest document and software updates.
P1 AVB processor and measurement platform
L-Acoustics P1 is an AVB processor and measurement platform. Remote controlled from LA Network Manager 2.6
Windows/macOS software together with L-Acoustics amplied controllers, its 20 inputs / 18 outputs dual core DSP
platform provides a comprehensive solution for mixing desk selection, signal processing and distribution over AVB
networks, AES/EBU or analog lines.
P1 includes four microphone inputs and an advanced library of acoustic measurement functions for efcient system
tuning. The workow is twofold: the impulse responses of all parts of the system are acquired from multiple audience
locations; then, optimal system tuning is directly determined from LA Network Manager 3 with automatic delay nder
and EQ modelization ofine algorithms. Thanks to a powerful database architecture and online integration with amplied
controllers, the System Engineer can easily select and apply the settings that will achieve the desired result in accordance
with the Soundvision design, the audience characteristics, and the artistic objectives.
8 P1 user manual (EN) version 2.1

System components
System components
Loudspeaker enclosures
Refer to the user manuals of the loudspeaker systems for detailed instructions about the enclosures and their
connection to the amplied controllers.
Powering and driving system
LA12X Amplied controller with DSP, preset library and networking capabilities
LA4X Amplied controller with DSP, preset library and networking capabilities
LA8 Amplied controller with DSP, preset library and networking capabilities
LA4 Amplied controller with DSP, preset library and networking capabilities
P1 AVB processor and measurement platform
Rack
LA-RAK II Touring rack containing three LA12X, LA-POWER II for power distribution and LA-PANEL II for
audio and network distribution
Software applications
Soundvision 3D acoustical and mechanical modeling software
LA Network Manager Software for remote control and monitoring of amplied controllers
Refer to the Soundvision help.
Refer to the LA Network Manager help.
Illustrations
LA Network Manager LA-RAK II
P1 user manual (EN) version 2.1 9

Technical description
Technical description
Main features
Internal components
P1 has 20 inputs:
• four microphone inputs with switchable +48 V phantom power and high-pass lter.
• four analog line inputs with high-quality A/D conversion
• four AES/EBU inputs with high-quality Sample Rate Converter (SRC)
• one AVB listener capable of retrieving up to eight audio channels from one stream
Its dual DSP core allows to mix these inputs to four independent DSP busses for EQ and dynamics signal processing,
and/or route them directly to any of the 16 + 2 outputs:
• four analog line outputs with high-quality D/A conversion
• four AES/EBU outputs
• one AVB talker capable of sending up to eight audio channels in one stream
• one stereo headphone output
Power is provided by a universal Switched Mode Power Supply (SMPS). Control is possible from the front panel TFT color
touchscreen display user interface, and remotely over 1 Gb/s Ethernet. One General Purpose I/O (GPIO), containing
two GPI and two GPO, allows for control of precongured status or operations. Two USB 2.0 host connectors allow the
connection of the P1 Sensor for temperature and humidity measurement or a USB storage device (max. 500 mA / 5 V).
Front and rear panels
1 2 345
6
7
8
9
10
11
12
1TFT color touchscreen display (320 × 120 px) 6XLR analog input connectors
2encoding wheel with push button 7XLR analog output connectors
3USB 2.0 host connectors 8XLR AES/EBU input connectors
4XLR analog mic input connectors 9XLR AES/EBU output connectors
51/4 inch stereo headphone jack 10 EtherCON connectors (L-NET and AVB)
11 General Purpose I/O (GPIO) DB9 female connector
12 IEC C13 V-Lock compatible socket with on/off switch
10 P1 user manual (EN) version 2.1

Technical description
Signal processing
Signal inputs
P1 features 10 XLR connectors capable of receiving up to 12 input signals: four microphones, four analog lines, four
AES/EBU signals (transported in pairs).
In addition, eight channels may be retrieved from an AVB stream at 48 kHz or 96 kHz, connected by one of the two 1
Gb/s Ethernet ports.
Analog line
P1 can receive four balanced analog line signals using the four analog input connectors on the rear panel. The maximum
input signal level is +22 dBu.
Each connector is an ESD protected female XLR3.
To be processed by the DSP, the analog signal is converted into a digital signal. For this purpose, P1 is tted with an A/D
converter operating at 32-bit/96 kHz.
AES/EBU
P1 can receive four AES/EBU digital audio signals (transported in pairs) using the two AES/EBU input connectors on the
rear panel.
Each connector is an ESD protected female XLR3.
Each AES/EBU input port is equipped with a Sample Rate Converter (SRC) selected to support a wide range of input
formats (16, 18, 20 or 24 bits / 44.1, 48, 88.2, 96, 176.4 or 192 kHz). It converts them to the 24 bits / 96 kHz
internal format. The SRC is a high-quality hardware component (140 dB dynamic range, < -120 dBfs THD+N, strong
input jitter attenuation) and provides constant propagation delay regardless of the input sampling frequency. There is no
external synchronization mode. The processor clock runs either using its high-precision internal quartz at 96 kHz, or on
the clock of the connected AVB input stream.
AVB
P1 retrieves up to up to eight channels from a single AVB stream.
Each connector uses a high speed data transfer protocol up to 1 Gb/s and supports the IEC 61883-6 AM824 and AAF
PCM32 stream formats with stream frequencies of 48 kHz or 96 kHz.
P1 operates as an AVB bridge and may therefore be used to create an AVB network.
Microphone
P1 can receive four analog mic/line signals using the four MIC input connectors on the front panel. The maximum input
signal level is +22 dBu (at 0 dB gain). Gain range is 0 dB to 60 dB.
Each connector is an ESD protected female XLR3.
Other
P1 features two USB 2.0 host connectors and a General Purpose I/O (GPIO) female DB9 connector connector.
The two USB 2.0 host connectors can be used to connect the P1 Sensor for temperature and humidity measurement, or a
USB storage device.
If a connected device draws more than 500 mA / 5 V, both USB ports stop working.
Do not charge phones on P1.
If the USB ports stop working, disconnect the device and power cycle P1.
Measurement and tuning
P1 is the measurement platform for LA Network Manager 3.0, using the four MIC input connectors for multi-microphone
measurement and the USB P1 Sensor for temperature and humidity acquisition.
Refer to the LA Network Manager Help for detailed instructions.
P1 user manual (EN) version 2.1 11

Technical description
DSP architecture
The DSP engine is a 32-bit oating point DSP at 96 kHz sampling rate. It provides an enhanced dynamic range as it
does not produce internal signal clipping like a xed point DSP.
12 P1 user manual (EN) version 2.1

Technical description
Signal outputs
P1 features six XLR connectors capable of distributing up to eight output signals: four analog lines and four AES/EBU
signals (transported in pairs).
In addition, eight channels may be transmitted using one AVB stream at 48 kHz or 96 kHz through the L-NET 1 Gb/s
Ethernet ports.
Analog line outputs
P1 can distribute four analog line signals using the four analog output connectors on the rear panel.
Each connector is an ESD protected male XLR3.
AES/EBU outputs
P1 can distribute four AES/EBU digital audio signals (transported in pairs) using the two AES/EBU output connectors on
the rear panel.
Each connector is an ESD protected male XLR3.
AVB outputs
P1 can distribute eight channels using one AVB stream at 48 kHz or 96 kHz using the two L-NET EtherCON connectors
on the rear panel.
Each connector uses a high speed data transfer protocol up to 1 Gb/s and supports the IEC 61883-6 AM824 and AAF
PCM32 stream formats, with stream frequencies of 48 kHz or 96 kHz.
Other outputs
P1 features a 1/4 inch stereo headphone jack.
Power supply
P1 relies on a universal Switched Mode Power Supply (SMPS) suitable for mains from 100 V to 240 V ( ±10%), 50-60
Hz.
Monitoring and control
User interface
The front panel is tted with a 320 × 120 px TFT color touchscreen display and an encoding wheel with push button.
Refer to section Operation (p.21) for detailed instructions.
L-NET remote control network
L-NET is an Ethernet-based network with a high speed data transfer protocol up to 1 Gb/s.
P1 is connected to the computer running LA Network Manager using either of its two etherCON connectors on the rear
panel and industry standard CAT5e U/FTP cables (or higher category) tted with RJ45 connectors.
Refer to the LA Network Manager help for detailed instructions.
P1 user manual (EN) version 2.1 13

Preventive maintenance
Preventive maintenance
Perform CHK - External structure (p.14) before and after each deployment (touring applications), or at least once a
month (xed installation).
Perform CHK - Network functionalities and rmware (p.14) at least once a year.
CHK - External structure
Equipment
• dry cloth
Procedure
1. Visually inspect the following elements for obvious damage or lost parts:
a) front panel touchscreen display
b) encoder wheel
c) front and rear connectors
d) chassis
2. Remove any dust from the side grills.
Use a dry cloth.
CHK - Network functionalities and rmware
Equipment
• computer with LA Network Manager (version 2.6 minimum) and CAT5e U/FTP cable
Procedure
1. Connect the processor to an Ethernet port of a computer running LA Network Manager.
Use the CAT5e U/FTP cable.
2. Open LA Network Manager and set it on online mode.
3. Check that the processor is detected as an online Unit.
Refer to the LA Network Manager Help.
4. Check that all L-Acoustics processors in the system run the same version of the rmware.
The version of the rmware should match with the version of LA Network Manager in use. Refer to the LA NWM
and rmware compatibility issues technical bulletin.
5. If convenient, update LA Network Manager and the rmware to the latest versions.
If using a third-party control system such as Crestron or Extron, check that updating rmware does not break
compatibility.
14 P1 user manual (EN) version 2.1

Installation
Installation
Mounting
P1 is one rack unit high (1U) and can be mounted in an EIA-standard 19'' rack using the four points on the front panel.
Use the xing material provided by the rack manufacturer to mount the processor to the rack front rails.
32 mm / 1.25 in
465 mm / 18.3 in 483 mm / 19 in
44.5 mm / 1.75 in
27 mm / 1 in
275 mm / 10.83 in
240 mm / 9.45 in
93 mm / 3.66 in
10 mm / 0.39 in
19 mm / 0.75 in
445 mm / 17.52 in
P1 is not compatible with L-Case.
Ventilation
To maintain moderate operating temperatures, P1 is equipped with side grills and a fan with temperature-controlled
speed (internal temperature probe).
The air ows from the right side to the left side (when looking at P1 from the front).
Do not block the side ventilation grills.
Install the processor with the side panels at a minimum distance of 5 cm from any external object or structure.
When rack-mounted, make sure airow is not reduced.
P1 user manual (EN) version 2.1 15

Installation
Connecting to AC mains
Electrical specications
AC mains specications
Verify the electrical conformity and compatibility of the mains supply.
Only connect the product to an AC power outlet rated 100-240 V, 50-60 Hz.
The product draws 27 W (typical).
WARNING: The product is of CLASS 1 construction and shall be connected to a mains socket outlet with a
protective connection to earth.
Three-phase circuit
When the product is used in a three-phase circuit, verify the electrical conformity and
compatibility of the three-phase circuit.
Verify that the three phases work, and balance the loads between the three phases.
Verify that the neutral and earth work.
Never try to emulate a 230 V circuit connecting an apparatus to two live wires of a 120 V three-phase circuit.
Never try to emulate a 200 V circuit connecting an apparatus to two live wires of a 100 V three-phase circuit.
Power cord
The removable IEC cord is tted with a female IEC C13 connector with V-Lock at one end and a country-specic plug at
the other end.
type plug cable ratings live neutral ground
CE CEE 7/7, earthed 10 A / 250 V
CN GB 2099, earthed 10 A / 250 V
JP JIS C 8303, earthed 7 A / 125 V
brown blue green/yellow
US NEMA 5-15, earthed 10 A / 125 V black white green
Strictly apply the specic safety regulations of the country of use.
Do not defeat the ground connection of the supplied power cord using an adaptor or any other methods.
Plugging to AC mains
Procedure
— Connect the power cord female IEC C13 connector to the processor male IEC C14 socket.
Check that the cable is properly locked.
— Connect the power cord country-specic plug to the mains socket.
Power consumption
P1 power requirement is 27 W.
16 P1 user manual (EN) version 2.1

Installation
Audio and network cabling
Connection panels
P1 features input, ouput and L-NET/AVB connectors on its front and rear panels for audio and network connection.
Do not connect the P1 outputs to its own inputs.
Risk of damage to the product and the system.
input and L-NET connectors
1
2 3 4
output connectors
56
1. Analog mic inputs (front panel)
2. Analog line inputs
3. AES/EBU inputs
4. Ethernet connectors for L-NET and AVB networks
5. Analog line outputs
6. AES/EBU outputs
The XLR3 connectors are wired according to IEC 60268-12:
• pin 1: shield
• pin 2: + signal
• pin 3: - signal
Analog connectors
The MIC INPUTS 1 to 4 connectors (front panel) can receive four analog input signals. The ANALOG INPUTS 1 to 4
connectors (rear panels) can receive four analog input signals. The headroom is high enough to accept up to +22 dBu
input levels (at 0 dB gain).
The ANALOG OUTPUTS 1 to 4 connectors (rear panel) can send four analog output signals. The maximum output level is
+22 dBu (at 0 dB gain).
Loss in the analog signal
Do not load P1 outputs with less than 600 Ω.
Balanced cables
Symmetrical (balanced) shielded cables are highly recommended as balanced signals are less sensitive to AC
hum and radio interference.
Unbalanced lines may add noise especially over long cable runs.
P1 user manual (EN) version 2.1 17

Installation
AES/EBU connectors
The AES/EBU INPUTS 1/2 and 3/4 connectors (rear panel) can receive four digital input signals.
The AES/EBU OUTPUTS 1/2 and 3/4 connectors (rear panel) can send four digital output signals.
Supported digital input format
Standards: AES/EBU (AES3) or electrical S/PDIF (IEC 60958 Type II)
Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz
Word length: 16 bits, 18 bits, 20 bits, or 24 bits
Cables for AES/EBU digital audio
AES3 species that the nominal characteristic impedance of cables used for AES/EBU digital audio transmission shall
be 110 Ω ± 20%, and closer tolerances allow for increased transmission reliability over long lengths or higher sampling
rates.
Therefore, it is highly recommended to use high-quality AES/EBU rated cables only, although certain cables designed for
balanced analog audio prove to be acceptable at 48 kHz sampling rate over very short distances.
It is recommended to use single lengths of cable between AES/EBU outputs and inputs. Using several shorter cables
joined together reduces performance. If it is not possible to use single lengths, it is required to use the same model of
cable between two AES/EBU interfaces.
In case of transmission losses, try to reduce the sampling frequency of the digital audio source. Moreover, as a general
rule, avoid using sources rated beyond 96 kHz, as the maximum possible cable length is reduced, while the additional
information is cancelled by SRC to 96 kHz.
P1 has been tested with up to 200 m / 656 ft of OT234H AES/EBU rated cables from KLOTZ communications GmbH
(single cuts, digital source signal running at Fs = 96 kHz, tested for input and output).
Ethernet connectors
The two etherCON connectors are for the remote control of P1 over an Ethernet network called L-NET using LA Network
Manager.
The same connectors are also used for AVB.
Each of the two etherCON connectors can be equally used as an IN or a LINK connector.
Refer to the amplied controller user manuals and the LA Network Manager help for more information on how to connect
amplied controllers and P1 to the L-NET / AVB network in daisy-chain, star or hybrid topologies.
18 P1 user manual (EN) version 2.1

Installation
Cabling example
P1 can be used for:
• Time-aligned redundant AVB, AES/EBU, and analog signal distribution (to LA-RAK II for example).
• AVB to AES/EBU or analog bridge (for non-AVB amplied controllers like LA8).
• Integration of other platforms (like the self-powered P series).
• Audio playback (with a USB drive and the P1 Media Player).
• System measurement and tuning: multi-microphone measurement with temperature and humidity acquisition (with LA
Network Manager 3.0 and the P1 Sensor).
Ethernet AVB
Analog / Mic
Analog / Line
AES/EBU
USB
consoles
P1
LA8
LA-RAK II
P series
Media Player
P1
LA NWM
P1 Sensor
System measurements from LA Network Manager 3.0
Generated sweeps disable AVB output 5 to 8, and all inputs except MIC.
Refer to the LA Network Manager Help for more information.
P1 user manual (EN) version 2.1 19

Installation
General Purpose I/O (GPIO)
P1 features a female DB9 connector on the rear panel.
1
2
3
4
5
6
7
8
9
1 OUT1+ fully isolated output, relay contact
2 OUT1- fully isolated output, relay contact
3 OUT2+ fully isolated output, relay contact
4 OUT2- fully isolated output, relay contact
5 IN1+ fully isolated input
6 IN1- fully isolated input
7 IN2+ referenced to chassis ground
8 +5 V / 50 mA power referenced to chassis ground
9 CHGND chassis ground
The following messages can be displayed when an impossible action is triggered.
GPI # error: Cannot load cfg
Configuration loading disabled
Displayed if the GPIO is programmed to load a conguration, but
the conguration menu is disabled because LA Network Manager is
connected.
GPI # error: Cannot load cfg A
Invalid configuration index
Displayed if the GPIO is programmed to load a conguration, but the
selected conguration memory space is empty.
GPI # error: Cannot load cfg B
Invalid configuration index
Displayed if the GPIO is programmed to load a conguration, but the
selected conguration memory space is empty.
GPI # error: Cannot load next cfg
No next configuration found
Displayed if the GPIO is programmed to load the next conguration,
but the next conguration memory space is empty.
GPI # error: Cannot load prev. cfg
No previous configuration found
Displayed if the GPIO is programmed to load the previous
conguration, but the previous conguration memory space is empty.
20 P1 user manual (EN) version 2.1