La Crosse Technology 513-1417ALv4 User manual

Atomic Digital Clock
with Temperature and Moon Phase
Model: 513-1417ALv4
D.C.092218
For online video support:
http://bit.ly/LaxTechTalk
Full manual can be found under the
Support Tab here: bit.ly/513-1417ALv4

Setup
Power up. Insert 2-AA batteries into the sensor, then into the clock. Observe
the correct polarity.
Configure basic settings. Hold the SET button for 3 seconds to enter settings
menu. Use the +/- buttons to adjust and SET to confirm.
AA
AA
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. DST ON | OFF (Daylight Saving Time)
5. Time Zone
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
Note: When Español is selected, weekday and sub menu instructions will be in
Spanish. Calendar order: Day, Month, Year.
AA
AA
English | Español Beep ON | OFF
Atomic ON | OFF DST ON | OFF
Time Zone Hour
AST
EST
CST
MST
PST
AKT
HAT
Atlantic
Eastern
Central
Mountain
Pacific
Alaskan
Hawaiian
Time Zone
Minutes Year
Month Date
Fahrenheit | Celsius
Atomic Time
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SET button to search manually for atomic time signal.
• Press the SET button to select daylight saving time ON/OFF. If you do not
observe DST, use the +/- button to turn o the Daylight Saving Time Indicator.
• For information about WWVB visit: http://bit.ly/AtomicTime
Place outdoor sensor outside in the shaded location and enjoy your weather
information.
Page | 1 www.lacrossetechnology.com/support 513-1417ALv4 513-1417ALv4 www.lacrossetechnology.com/support Page | 2
Note: When setting the hour, AM
indicates times before 12:00 (noon) and
PM indicates time after 12:00 (noon).
Note: When the Atomic setting is set
to OFF, the menu will skip to item 6,
your Hour setting

Display icons
AM | PMLow Battery Alarm | Snooze
Atomic Time Fahrenheit | Celsius
Trend Arrow Sensor Signal Strength
Hour Minutes
Time Alarm
• Set: Hold the ALARM button for 3 seconds to enter alarm settings.
• Use the +/- buttons to adjust and ALARM to confirm.
Deactivate | Activate: The alarm is active when set.
Press and release the ALARM button to deactivate or activate the alarm.
The clock icon will show when alarm is active.
Snooze: Press and release the SNOOZE button to silence the alarm for 10 minutes.
Snooze can be repeated.
Moon Phase
The moon phase is based on the lunar calendar and the Year, Month, and Date
settings set within this clock. Most Internet moon phase calculations are based on
the lunar calendar and can be categorized into one of the following
New
Moon
Small Waxing
Crescent
Large Waxing
Crescent
First
Quarter
Small Waxing
Gibbous
Large Waxing
Gibbous
Full
Moon
Large Waning
Gibbous
Small Waning
Gibbous
Last
Quarter
Large Waning
Crescent
Small Waning
Crescent
HI | LO Temperature
• Press the PLUS button to view HI Temperature.
• Press again to view LO Temperature.
• Hold the PLUS button for 5 seconds to reset HI and LO temperature.
Note: All records reset at midnight.
HI Temp LO Temp
Temperature Trend Arrows
The outdoor temperature trend indicators update every 15 minutes and provide a
1 hour comparison of readings that took place every 15 minutes within that hour.
The temperature will have to rise or fall by 2°F (1°C) or more within the hour for the
arrows to change.
Temperature rose Temperature is
unchanged
Temperature fell
Page | 3 www.lacrossetechnology.com/support 513-1417ALv4 513-1417ALv4 www.lacrossetechnology.com/support Page | 4

Sensor Reception
• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon will flash until the sensor signal is received
or for 3 minutes if no signal available.
• The signal will show solid when connected to the sensor.
Low Battery Icon
Mount Temperature Sensor
• Battery icon by time-Change batteries in the clock.
• Battery icon by outdoor temperature-Change batteries in the sensor.
• Mount the outdoor sensor on a north-facing wall or in any
well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is over 300 feet
(91 meters) in open air; this does not include barriers such as walls or floors.
• Be sure the outdoor sensor is mounted vertically.
Position Clock
The clock has a pullout stand to sit on a desk or table, or openings on the back to
mount on a wall.
• For best Atomic time reception orientate the clock with the front or the back
facing Ft. Collins, Colorado.
• Choose a location 6 feet or more from electronics such as cordless phones,
gaming systems, televisions, microwaves, routers etc.
• Place within range of the outdoor sensor (330 feet open air).
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house five feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection.
• Place sensor outside in shaded location.
Specifications
513-1417ALv4 www.lacrossetechnology.com/support Page | 6Page | 5 www.lacrossetechnology.com/support 513-1417ALv3
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
Let’s Be Social!
If you have ideas for features or support solutions you’d like to see us
make, please let us know! We truly want to make owning a La Crosse
Technology product not only a practical experience, but also a fun
one. So email us at: [e-mail]
Help Us, Help You!
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range:
Over 300 ft. (91 meters) RF 433MHz (open air)
Power Requirements:
513-1417ALv4 - 2 AA batteries (not included)
TX141-Bv3 - 2 AA batteries (not included)
Battery Life:
513-1417ALv4-over 12 months
TX141-Bv3-over 12 months
Dimensions:
513-1417ALv4- 11.10” W x 1.14” D x 6.75” H
(28.19 W x 2.89 D x 17.15 H cm)
TX141-Bv3- 1.57” L x 0.79” W x 5.12” H
(3.98 L x 2.0 W x 13.0 H cm)
WARNING: This product can expose you to chemicals including styrene, which
is known to the State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov

Warranty and Support
Care and Maintenance
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period.
• Promptly remove expired batteries.
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support or visit our online
help:
Phone: [phone]
Online: www.lacrossetechnology.com/support
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications
to this equipment. Such changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and corrections are included in subsequent
editions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Canada Statement
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
FCC Statement
Page | 7 www.lacrossetechnology.com/support 513-1417ALv4