La Crosse Technology BBB82684 User manual

Two-Tone Atomic Digital Clock
TWO-TONE
ATOMIC DIGITAL CLOCK
WITH INDOOR/OUTDOOR TEMPERATURE
INSTRUCTION MANUAL
MODEL: BBB82684
DC: 083018
FIND MANUALS, FAQS, AND MORE UNDER
THE SUPPORT TAB HERE: bit.ly/bbb82684

Two-Tone Atomic Digital Clock
TABLE OF CONTENTS
Page | 2
3. Power Up
3. WWVB Atomic Time Signal
4. Settings Menu
5. Timer
•Set Timer
•Pause/Play Timer
•Start/Stop Timer
•Timer Sounds
•Timer or Clock Display
6. Alarm
•Set Alarm
•Activate/Deactivate Alarm
•Snooze
6. Change Batteries
•Sensor
•Clock
•Factory Reset
7. Sensor Weather Shield-Not Included
7. We’re Here to Help
7. Join the Conversation
7. Care & Maintenance
8. Specifications
8. Warranty Info
9. FCC Statement

Two-Tone Atomic Digital Clock
POWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 2-AA batteries into your Digital Clock.
3. Set time, date, etc.
4. Once the sensor is reading to your clock, place sensor outside in a shaded location.
Watch sensor mounting video: bit.ly/TH_SensorMounting
AA AA
TX141-Bv3
Outdoor
Sensor
AA
AA
BBB82684
Digital Clock
WWVB ATOMIC TIME SIGNAL
• From normal time display, press and release the SET button to search for the WWVB time signal.
• Your clock will search for the atomic signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• The atomic time signal icon will flash while searching. The tower icon will be solid when it has
connected.
• If there is no WWVB reception, the station will search for the atomic time signal every 2 hours until the
WWVB time is received.
Page | 3

Two-Tone Atomic Digital Clock
SETTINGS MENU
1.Hold the SET button 3 seconds to enter settings mode.
2.Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
5.Press the SNOOZE button at any time to exit.
Settings order:
• Language (English, Español, Francais)
• Beep ON/OFF
• Atomic ON/OFF
• DST ON/OFF
• Time Zone
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Temperature Fahrenheit/Celsius
Note: When Español or Francais are selected, the instructions will be in the selected language.
Note: Weekday sets automatically when Year, Month and Date are set.
7 Time Zones:
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
DST
LANGUAGE BEEP ON/OFF ATOMIC SIGNAL ON/OFF DST ON/OFF
TIME ZONE 12/24 HOUR FORMAT HOUR MINUTES
YEAR MONTH DATE FAHRENHEIT/CELSIUS
AM AM
Page | 4

Two-Tone Atomic Digital Clock
TIMER
The Timer can be set from 1 minute (minimum) all the way up to 24 Hours (maximum).
Set Timer:
1. Hold the TIMER button for 3 seconds. The hour will begin to flash. Press the + or - button to adjust the
Timer hour.
2. Press the TIMER button to confirm, the minutes will then begin to flash. Use the + or - button again to
adjust Timer minutes.
3. Press the TIMER button to confirm and begin Timer countdown.
Timer Hour Timer Minutes Timer Countdown
PAUSE/PLAY TIMER:
• While the timer is active press the MINUS (-) button to Pause the timer, press it again to play and
continue the current timer.
• While the timer is PAUSED user can toggle between Clock or Timer display with the PLUS (+) button
• When Timer is PAUSED and clock is displayed the Timer Indicator will show solid without arrows.
START/STOP TIMER:
• Press the TIMER button to start or stop the timer.
• When stopped, Timer returns to last setting. If Timer was set at 45 minutes, when timer is stopped it will
return to 45 minutes.
TIMER SOUNDS:
• When Timer reaches “0” you will hear 5 beeps every 15 seconds for up to 1 minute.
• If the TIMER button is not pressed, the timer will begin counting up from “0”.
TIMER OR CLOCK DISPLAY:
• Press the PLUS (+) button to toggle between Timer Counting Display and Clock Display.
• When Timer is active and Clock is displayed the Timer Indicator will show solid. The Up or Down Arrow
will flash.
OUTDOORINDOOR
Timer Display Clock Display
TIMER INDICATORS
Count Up
Timer
Count Down
Timer
Timer
Paused
Page | 5

Two-Tone Atomic Digital Clock
ALARM
SET ALARM
1.Hold the ALARM button 3 seconds to enter settings mode.
2.Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the ALARM button to confirm adjustments and move to the next item.
5.Press the SNOOZE button at any time to exit.
ACTIVATE/DEACTIVATE ALARM
• The alarm is active when set.
• From normal time display, press and release the ALARM button to deactivate or activate the alarm.
The alarm time will show for 2 seconds.
• Alarm icon will show then active.
Alarm Hours Alarm Minutes Alarm ON Alarm OFF
SNOOZE
• When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes.
• The alarm icon will flash.
• Press any button except SNOOZE to silence the alarm for 24 hours.
Note: When the alarm sounds, it continues for 2 minute and then shuts o completely.
CHANGE BATTERIES
Sensor:
1. When Battery Indicator shows next to the Outdoor Temperature, replace batteries in your Outdoor
Sensor.
2. Then hold the PLUS (+) button for 3 seconds and your clock will search for your sensor.
Clock:
1. When Battery Indicator shows next to the Indoor Temperature, replace batteries in your Clock.
2. Then hold the PLUS (+) button for 3 seconds and your clock will search for your sensor.
Factory Restart:
1. Bring sensor within 5 feet of your clock. Remove batteries from clock and sensor for 15 minutes.
2. With batteries out, press any button on the clock 20 times.
3. After 15 minutes insert fresh batteries into your sensor and into your clock.
Page | 6

Two-Tone Atomic Digital Clock
• The Sensor Weather Shield is designed to protect your outdoor sensor from rain
and snow.
• This shield will oer limited protection from the sun’s heat.
• Purchase at: bit.ly/925-1418
If you require additional support, call or customer support team based out of La Crosse, Wisconsin.
Phone: [phone]
Or fill out our online support request form here: bit.ly/contact_techsupport
Our knowledgeable support team is available: Monday-Friday, 8am-6pm CST
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
SENSOR WEATHER SHIELD-NOT INCLUDED
CARE & MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Promptly remove expired batteries.
Page | 7

Two-Tone Atomic Digital Clock
SPECIFICATIONS
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: 330 ft (100 m) open air RF 433MHz
Power Requirements:
Digital Clock: 2-AA batteries not included
TX141-Bv3 sensor: 2-AA batteries not included
Battery Life:
Digital Clock: over 24 months
Tx141-Bv3 Sensor: over 24 months
Dimensions:
Digital Clock: 8.54” L x 1.02” W x 7.77” H (21.69cm L x 2.59cm W x 19.73cm H )
TX141-Bv3 Sensor: 1.58” L x 0.83” W x 5.08 “ H (4.01 cm L x 2.10cm W x 12.90cm H)
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this
product relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
WARRANTY INFO
Page | 8

Two-Tone Atomic Digital Clock
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission of the
publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any responsibility for any technical error or
printing error, or their consequences.
All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
FCC STATEMENT
Page | 9