La Crosse Technology Sagebrook 404-3015CC User manual

15.75-Inch Indoor/Outdoor
Sagebrook Wall Clock
Model: 404-3840SG
DC: 070722
This product is warranted to be free from defects in material and workmanship under
normal use and service for a period of two years from the date of sale to the customer.
Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect
that is covered by this warranty arises during the warranty period, promptly return
the clock (postage prepaid) with proof of purchase showing the date the clock was
purchased to the following address and such defects will be repaired, or the products
will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
For online support visit: bit.ly/contact_techsupport
Patents: www.lacrossetechnology.com/pages/patent
WARRANTY & SUPPORT
Made in China - Printed in China
This product can expose you to chemicals including acrylonitrile, butadiene, and
styrene, which are known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to: www.P65Warnings.ca.gov
CA WARNING:
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life: 12 months
Temperature Range: 0ºF to 100ºF
Dimensions: 15” x 2”
SPECIFICATIONS

CARE & MAINTENANCE
POWER UP
1. Pull up on the Square Cover to access the movement.
2. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
3. Rotate the Time Set Wheel to set the time.
4. Replace the Square Cover over the movement and press down to
lock it back in place.
5. Mount on a wall and enjoy!
The quartz movement will keep the clock running accurately. If the
clock does not operate, or steadily loses time, replace the battery.
Learn more from our video: bit.ly/wallclock_setup
MOUNTING
Indoor: Mount the clock on a wall using the hanging hole on the
back.
Outdoor: Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain. A shaded location
will prevent inaccurate temperature readings. Mount the clock on a
wall using the hanging hole on the back.
Time Set
Wheel
Battery
Compartment
AA
Lift o to
access
Battery
Compartment
Battery replacement instruction:
When batteries of dierent brand or type are used together, or
new and old batteries are used together, some batteries may be
over-discharged due to a dierence of voltage or capacity. This
can result in venting, leakage, and rupture and may cause personal
injury.
• Always purchase the correct size and grade of battery suitable for
the intended use.
• Always replace the whole set of batteries at one time, taking care
not to mix old and new ones, or batteries of dierent types.
• Clean the battery contacts and those of the device prior to battery
installation.
• Ensure the batteries are installed correctly with regard to polarity
(+ and -).
• Remove batteries from product during periods of non-use. Battery
leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the
environment please check the internet or your local phone
directory for local recycling centers and / or follow local
government regulations.
• The clock has a built-in analog thermometer that measures surrounding
temperature in degrees Fahrenheit.
• The thermometer has been precalibrated and will work without battery
power or manual adjustment.
THERMOMETER
Square Cover