Labnet GyroMini User manual
GYRO MINI NUTATING MIXER
User Manual
Lit M00066 Rev.2, July 2016
S0500
S0500-230V-EU
S0500-230V-UK
About This Manual
This manual is designed to assist you in the optimal usage of your Labnet Gyro Mini
Nutating Mixer. The manual is available in English, French, German, Italian, Portuguese,
and Spanish on our website at www.labnetinternational.com/document-center
OVERVIEW
The GyroMini Nutating Mixer is a three dimensional shaker typically used for maintaining
the uniform suspension of blood components in blood collection tubes without foaming.
The GyroMini Nutating Mixer is also ideal for mixing large strands of DNA into solution in
micro tubes or mixing blood into a buffer in large centrifuge tubes. The GyroMini achieves
its 3-dimensional mixing by combining the rotating motion of an orbital shaker with the
rocking motion of a platform rocker.
The modern styling of the Labnet GyroMini housing is achieved through the use of injection
molded FR-ABS plastic. The large platform is constructed of powder coated aluminum
topped with a rubber TPE mat.
INSTALLATION
The Labnet GyroMini can be used on a bench, in a cold room or in an incubator up to 40C.
Place the unit on a flat stable surface and be sure to leave sufficient room around the unit
to allow both the platform and load to move freely. A minimum of 4 inches (10cm)
clearance on all sides of the mixer is advised.
Plug the unit into a properly grounded outlet of the appropriate voltage as shown on the
units data plate label.
OPERATION
Tubes may be placed directly on to the dimpled mat. The dimple pattern is configured to
allow blood tubes and centrifuge tubes to be securely placed on the mat without additional
strapping in most cases. If tubes are to be stacked, they should be secured with rubber
bands or bungie cords. Holes in the corners of the platform edges are provided for this
purpose.
Always load the platform in a uniform and balanced fashion.
Use the On / Off switch to turn the unit on. The direction of rotation in which the unit starts
is random and does not affect mixing. If desired, the rotational direction can be reversed by
holding the unit’s base and very briefly touching the rotating platform on the bottom at one
corner. This technique can also be used to select the quietest direction of rotation.
MAINTENANCE
Always disconnect cord from power source before maintaining or servicing.
The Labnet GyroMini requires no maintenance other than occasional cleaning with a damp
cloth with mild detergent. The rubber dimpled mat may be washed in soap and water. Do
not immerse the unit in water or spill liquids over the unit. Be sure the unit is dry
before reconnecting to power.
SERVICE & REPAIR
The Labnet GyroMini is a well-built unit that should provide years of trouble free service.
Should service be needed, contact Labnet International at 732-417-0700. Service should
only be performed by a qualified service technician.
SPECIFICATIONS
S0500-MAT Replacement accessory dimpled mat
Mixing action: 3 dimensional rocking rotating
Mixing speed: 24 rpm fixed (120V model) 20 rpm fixed (230V model)
Platform Tilt angle: 20 degrees fixed
Platform dimensions: 9.5 in. x 6.75 in (24cm x 17cm)
Mixer dimensions w x h x d: (9.5 in x 5.75in x 6.75) (24cm x 14.6cm x 17cm)
Mixer weight: 1.88 lbs (0.85 kg)
Platform load capacity: 1.75 lbs balanced (0.8kg)
Platform capacity without stacking: 60 x 1.5ml micro centrifuge tubes; 30 x pediatric blood
tubes (3ml);
17 x 15ml centrifuge tubes; 21 x standard blood tubes (7ml); 9 x 50ml centrifuge tubes
Ambient operating range 4°C to 65°C, up to 85% RH non-condensing
Electrical: 120V, 50/60Hz, 0.03 amps or 230V, 50 /60Hz, 0.015 amps
SYMBOLS AND CONVENTIONS
The following chart is an illustrated glossary of the symbols that may be used in
this manual or on the product.
The electrical warning indicates the presence of a potential hazard which could
result in electrical shock.
CAUTION This symbol refers you to important operating and maintenance
(servicing) instructions within the product Instruction Manual. Failure to heed this
information may present a risk of damage or injury to persons or equipment.
This symbol identifies a Protective Earth (PE) terminal, which is provided for
connection of the supply system’s protective earth (green or green/yellow)
conductor.
31 Mayfield Ave. Edison, NJ 08837
P: +732-417-0700 F: +732-417-1750
Toll Free: 888-522-6381
labnetinfo@corning.com
www.labnetinternational.com
LIMITED WARRANTY
Labnet International Inc. warrants that this product will be free from defects in material and workmanship for a
period of one (1) year from date of purchase. This warranty is valid only if the product is used for its intended
purpose and within the guidelines specified in the supplied instruction manual.
Should this product require service, contact Labnet’s Service department at 732-417-0700 to receive a return
authorization number and shipping instructions. Products received without proper authorization will be returned.
All items returned for service should be sent postage prepaid in the original packaging or other suitable carton,
padded to avoid damage. Labnet International Inc.will not be responsible for damage incurred by improper
packaging. Labnet may elect for onsite service for larger equipment.
This warranty does not cover damage caused by accident, neglect, misuse, improper service, natural forces or
other causes not arising from defects in original material or workmanship. This warranty does not cover motor
brushes, fuses, light bulbs, batteries or damage to paint or finish. Claims for transit damage should be filed
with the transportation carrier.
ALL WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED IN DURATION OF 12 MONTHS FROM THE ORIGINAL DATE OF
PURCHASE.
LABNET’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT, AT LABNET INTERNATIONAL INC.’S. DISCRETION, OF A DEFECTIVE PRODUCT.
LABNET INTERNATIONAL, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE,
COMMERCIAL LOSSOR ANYOTHER DAMAGES RESULTING FROM THE USE OF THIS PRODUCT.
Some states do not allow limitation on the length of implied warranties or the exclusion or limitation of incidental
or consequential damages. This warranty gives you specific legal rights. You may have other rights which vary
from state to state.
No individual may accept for, or on behalf of Labnet International Inc., any other obligation of liability, or extend
the period of this warranty.
Please register your product online at:
www.labnetinternational.com
Warranty/Disclaimer: Unless otherwise specified, all products are for research use only. Not
intended for use in diagnostic or therapeutic procedures. Labnet International makes no claims
regarding the performance of these products for clinical or diagnostic applications.
EQUIPMENT DISPOSAL-EUROPEAN REGULATIONS
According to Directive 2012/19/EU of the European Parliament
and of the Council of 4 July 2012 on waste electrical and
electronic equipment (WEEE), Labnet GyroMini Nutating Mixer
is marked with the crossed-out wheeled bin and must not be
disposed of with domestic waste.
Consequently, the buyer shall follow the instructions for reuse
and recycling of waste electronic and electrical equipment
(WEEE) provided with the products and available at the
following link: www.corning.com/weee 9299300000
Table of contents
