Labona OLIVIA User manual

TECHNICA L M A NUA L
CASSETTE
AW N I N G S
OLIVIA

ISOTRA a.s.
Bílovecká 2411/1, 74601 Opava
IČ: 47679191
12
EN 13561
All awnings of ISOTRA a.s. comply with the standard ČSN EN 13561:2012.
European Marking of CE Compliance – marking on products:
CE Product Marking
Olivia Width of the awning L /m/
Arm 2,75 - 7,00 Larger sizes are not realized
Class of wind resistance
Test pressure p (N/m2),
max v (km/h)
2,00 2
-
(38)
2,50
3,00
3,50
4,00

28
MARKISE
▲Ideal for alarge terrace area thanks to drop 4 metres,
▲the option of electric vario valance,
▲the possibility of lightning integrated into the bottom profile,
▲alternative other optional equipment (heaters),
▲awnings can be coupled to atotal width of 12 metres
(2 pcs of awnings),
▲High-quality DICKSON and SATTLER awning fabrics.
OLIVIA
CASSETTE AWNING

Olivia
Basic product specication
Control
It serves to roll and unroll the awning into the tightened position.
Motor - The unrolling and rolling of the awning can be made by the electric drive. There is supplied the motor with automatic post-regulation
as standard, the awning will always close completely, 3 metre electric cable, single-pole surface mounted switch and plug. By the electric drive
you can use an automatic transmission according to the weather such as wind and solar sensor.
There is optional 5 or 10 metre electric cable, without switch and plug, and these motors:.
- Motor with automatic self-adjustment, awning will always be completely closed (Orea WT)
- Motor with built-in RTS receiver (Orea RTS)
- Motor with built-in IO receiver (Sunea IO)
Technical data
Min. ejection 2m
Max. ejection 4m
Min. width* 2,75m
Max. width** 7m
Informative weight on one standard meter of width awning without a rear box 20 kg
Informative weight on one standard meter of width awning with a rear box 22 kg
Informative weight on one standard meter of width awning with vario valance 24 kg
Type of arms folding aluminium with spring and belt
Movement angle 10° - 45°
Colour of the construction RAL 1015, 7016, 7016 Structure, 7035, 8014, 9006, 9007, 9010
Valance height 210mm / 250mm / 300 mm
Variovalance max. height 1,5m
Manual control -
Electric control motor
Assembly front on the façade, into the ceiling
Printing on awning on request
For the Olivia awning with Brush fabric, the maximum extension length is 3 m.
2-01328-0000
1/50
1/60
1/70 40
510
530
480
1/10
260/29 260 260/27
260/24
50
170
180
550
550
320
130
120
1/300
330
550
550
190
170
460
60
500
80
140/110
100160150490450280
1/210
1/210
230
90
140/140
1/250
* Minimum width: depending on the chosen drop:
- awning with 2 arms: W min = extension + 570mm
- awning with 3 arms: W min = (extension x 1,5) + 760mm
- for coupled awnings: see point page 41
** Maximum width: 6m in 1 part with 2 arms, 7m in 1 part with 3 arms, 12m in 2 parts with 4 arms

30
MARKISE
Position Name of component Abbreviation Number of tech. drawing
1/10 Mounting prole 40x40x2 - 4,1 m MRH 019 0004 6-013876-00004
1/50 Rubber prole for cover prole - black MRH 142 6-013880-9005
1/60 Cover prole - 4 m MRH 032 0004 6-013881-00004
1/70 Sliding strip for cover prole - PVC MRH 030 6-013882-0000
1/210 Prol spodní - 7,1 m MRH021/XXXX7 6-013898-XXXX7
1/220 Back prole - 4,1 m MRH 027 0004 6-013899-00004
1/250 Roll for fabric section Ø85x1,25 mm - 7 m MRH 065 6-013900-00007
1/300 Extension pole - 4,1 m MRH 023 0004 6-013904-00004
40 Wall bracket 100 mm MRH 234 6-015753-XXXX
50 Bearing support MRH 085 6-013877-0000
60 Support for cover MRH 060 6-013878-0000
80 Fastening extension pole left complete 2-01342-PU11
90 Plastic lead-in funnel folding arm - black MRH 134 6-013885-9005
100 Angular displacement left 2-01344-PU11
120 Fastening extension pole right complete 2-01343-PU11
130 Angular displacement right 2-01345-PU11
140 Set of arms - (LX530) OLIVIA see page 31
150 Holding support in box ext. pole - black MRH 124 6-013890-9005
160 Plastic holding support extension pole - black MRH 125 6-013891-9005
170 Side plate box L/R MRH 062 6-013894-0000
180 Side guard box right MRH 035 6-013895-0000
190 Side guard box left MRH 034 6-013896-0000
230 Bearing bush for fabric roll MRH 077 6-013870-0000
260 Motors see page 49
260/24 Motorsupport LT60 HI-PRO MRH 113 6-013871-0000
260/27 Adapter LT50 - Ø85 MRH 146 6-014680-0001
260/29 Carier ring LT50/60 - Ø 85 MRH 118 6-013903-0000
280 Gudgeon Ø85mm with pin Ø12mm MRH 075 6-013902-0000
320 Cover variovolant right, LX530 MRH 040 6-013906-0000
320 Cover variovolant right, OLIVIA MRH 041 6-014216-0000
330 Cover variovolant left, LX530 MRH 037 6-013907-0000
330 Cover variovolant left, OLIVIA MRH 038 6-014217-0000
450 Screw hexagon M6x60, DIN 912, A2 51050.060.060 6-009991-0060
460 Screw hexagon M10x60, DIN 912, A2 51050.100.060 6-013945-0000
480 Allen countersunk screw M8x60 A2 DIN 7991 51060.080.060 6-012809-0060
490 Allen countersunk screw M6x60 A2 DIN 7991 51060.060.060 6-013677-0060
500 Allen countersunk screw M5x60 A2 DIN 7991 51060.050.060 6-013957-0000
510 Allen screw round head M6x12, ISO 7380 51030.060.012 6-013955-0012
530 Nut M6, low, stainless 51090.060.001 6-010413-0000
550 Screw 4,8x32 DIN 7982 C-H A2 51680.048.032 6-013928-0032
Olivia (2-01328-0000)
Box Box with variovalance
249
231

The folding arms are available in these sizes: 2000 - 2500 - 3000 - 3500 and 4000mm.
Up to a width of 6000mm two arms are mounted, from 6001mm up to 7000mm 3 arms are mounted.
Set of arms
2-01337-PU11
140/110
140/140
Position Name of component Abbreviation Number of tech. drawing
140/110 Arm 200 - LEFT, LX530 MRH 002 XXXX 6-014007-XXXX
140/110 Arm 250 - LEFT, LX530 MRH 006 XXXX 6-014008-XXXX
140/110 Arm 300 - LEFT, LX530 MRH 010 XXXX 6-013888-XXXX
140/110 Arm 350 - LEFT, LX530 MRH 014 XXXX 6-014009-XXXX
140/110 Arm 400 - LEFT, LX530 MRH 017 XXXX 6-014010-XXXX
140/140 Arm 200 - RIGHT, LX530 MRH 004 XXXX 6-014011-XXXX
140/140 Arm 250 - RIGHT, LX530 MRH 008 XXXX 6-014012-XXXX
140/140 Arm 300 - RIGHT, LX530 MRH 012 XXXX 6-013889-XXXX
140/140 Arm 350 - RIGHT, LX530 MRH 016 XXXX 6-014013-XXXX
140/140 Arm 400 - RIGHT, LX530 MRH 018 XXXX 6-014014-XXXX
Number of wall brackets:
Width of the awning Number of wall brackets
2750 – 3500mm 2 pc
3501 – 6000mm 3 pc
6001 – 7000mm 4 pc
Brackets of arms
Wall bracket
Standard
tolerance
X
0,5
X,X 0,1
X,XX 0,05
angle 0,5
14
14
14
46
54
50
28
14
0
33,15
93,5
174,1
185,1
0
50
100
143,1
26,5
60,85
40,3
13
87,35
16,5
12,5
5
17
10,5
45,5
M10
M10
72
0
12,5
87,5
100
Formaat A4
AANGEMAAKT: 18/10/2017
P1700079 - #_01
063659
80133.80 mm²/m
Brut
LX530
Muurconsole bewerkt
WIP
ARTIKEL-NUMMER
PLAN-NUMMER
STATUS
SCHAAL
MAATEENHEID: mm
KLEUR: OPP: MATERIAAL: ALU
S.G.: 2.7 g/cm³
VOLUME: 415314.22
GEWICHT: 1121.35
EUROPESE PROJECTIE
Industriepark 3 - 3290 DIEST
TEL. [phone] - Fax. [phone]
Niet aangegeven Maat- en Vormtoleranties volgens:
Niet aangegeven wanddikte:
PROPERTY OF
1:2
SHEET: 1 OF 1
GETEKEND: KC
LAKOPP:
Ix=
Iy=
GEPRINT: 16/03/2018
Standard
tolerance
X
0,5
X,X 0,1
X,XX 0,05
angle 0,5
14
14
14
46
54
50
28
14
0
33,15
93,5
174,1
185,1
0
50
100
143,1
26,5
60,85
40,3
13
87,35
16,5
12,5
5
17
10,5
45,5
M10
M10
72
0
12,5
87,5
100
Formaat A4
AANGEMAAKT: 18/10/2017
P1700079 - #_01
063659
80133.80 mm²/m
Brut
LX530
Muurconsole bewerkt
WIP
ARTIKEL-NUMMER
PLAN-NUMMER
STATUS
SCHAAL
MAATEENHEID: mm
KLEUR: OPP: MATERIAAL: ALU
S.G.: 2.7 g/cm³
VOLUME: 415314.22
GEWICHT: 1121.35
EUROPESE PROJECTIE
Industriepark 3 - 3290 DIEST
TEL. [phone] - Fax. [phone]
Niet aangegeven Maat- en Vormtoleranties volgens:
Niet aangegeven wanddikte:
PROPERTY OF
1:2
SHEET: 1 OF 1
GETEKEND: KC
LAKOPP:
Ix=
Iy=
GEPRINT: 16/03/2018

32
MARKISE
Ceiling bracket
M12
95
68
231
15
58,7
64
82
154
30 30
33
281
249
M12
M12
95
68
231
15
58,7
64
82
154
30 30
33
281
249
M12
M12
95
68
231
15
58,7
64
82
154
30 30
33
281
249
M12
249
231

Fabric roller support
Its function is to prevent the sagging of the fabric roll and the maintenance of
the fabric’s tension.
As standard mounted from 5m width on.
To be placed on the double seam, in the middle of the awning.
Consists out of two components, for an easy assembly and disassembly:
The support, which glides over the support prole, is coated in the chosen
colour of the awning.
The shell-formed part is always grey.
Coupled awnings
Coupling with cardan
- The fabric is provided as two separate fabrics, already tted to both
awnings.
- Wmin (per part) = drop + 630mm.
Coupling with cardan and fabric split covering
Coupling with cardan
Coupling with one continuous fabric
Coupling with cardan and fabric split covering
Coupling with cardan
Coupling with one continuous fabric
Coupling with cardan and fabric split covering
- The fabric is provided as two separate fabrics, already tted to both awnings.
Fabric split covering subsequently seals the split between the two fabrics.
- Minimum width (per part) = drop + 790mm.
- The width of the fabric split covering is 600mm (width fabric = 550mm).
Fabric roller support
Coupler for coupling (cardan)
Fabric split covering

34
MARKISE
Accessories
Valance
Optional.
3 dierent standard types.
Valance not possible with Variovalance.
Valance height: 210 / 250 / 300mm
Variovalance
The Variovalance is a vertically rollable ounce.
Maximum variovalance height is 1500mm.
Variovalance with coupled awnings:
- In this case the Variovalance consists of 2 separate fabric parts with a
small interspace.
- Each of these parts has its own operation at the extreme left and the
extreme right side.
- Due to the coupling, the pattern of the awnings’fabric is not repeated
in the fabric of the Variovalance. For this reason, always use unpat-
terned or uni fabrics for the Variovalance.
LED lightning
The lighting includes a modied bottom plate, LED strip, power supply (240 V AC - 24 V DC) and optional receiver.
The LED strip is glued into the customized bottom plate.
The lighting can be used with the awning in both open and closed position.
The LED strip operates on 24 V, 9.6 W/m.
The lighting is for ambiance lighting purposes only.
If an IO vario valance has been tted, then the controls for the lighting are always on the opposite side to the IO vario valence controls.
A LED strip with power supply and optional receiver is tted to each section of the coupled awning.
Awning Olivia with variovalance
Extension pole variovalance
Coupling variovalance

Single-pole switch
Firstly, connect the electric cable of the motor to a test cable.
Four wires exit the motor: yellow-green (earth), blue (neutral), brown and black (up and down direction). Three wires exit the fuse box:
yellow-green (earth), blue (neutral) and a phase wire. Connect the wires as shown on the diagram.
The phase wire exiting the fuse box is to be connected to clamp P. If necessary, reverse the brown and black wire of the motor within the
switch, so that the arrows on the switch correspond to the raising and lowering direction of the awning.
Connect the two blue wires in the housing of the switch by means of a cableclamp. Do the same for the two earth wires.
Setting of the end switches of the motor
In principle the end switches of the motor are already set at the factory.
But it may be necessary to change the setting.
For this proceed as follows:
First remove the yellow cap from the adjusting buttons.
Press in both adjusting buttons fully, against their stops. The end settings are now fully removed in both directions.
Now allow the awning to roll out until the desired position is reached.
Note : never allow arms to go past their straightened position but stop them a little before.
Then place the switch to its neutral.
Press the white or yellow button ( depending on the building-in-side) so that it rises slightly. Then roll up the awning again and stop at a
distance of 10cm before the closing of the awning. Then press the blue setting button and have it rise slightly.
Let the motor run down for 20cm.
Then close the awning completely. One can hear the motor hum for a few seconds ( to compensate a possible later dilatation of the fabric )
and then switch itself o.
Replace the cover cap on the button.
The end switches of the motor are now set.