Lambrecht 32.15180.023020 User manual

Assembly Instructions
Bird Defense Ring for Precipitation Sensors
Id-No. 32.15180.023020
Bird Defense Ring Assembly Instructions
Warranty
Please note the loss that unauthorised manipulation
of the system shall result in the loss of warranty
and non-liability. Changes to system components
require express written permission from
LAMBRECHT meteo GmbH. These activities must
be performed by a qualied technician.
The warranty does not cover:
1. Mechanical damage caused by external impacts
(e. g. icefall, rockfall, vandalism).
2. Impacts or damage caused by over-voltage or
electromagnetic fields which are beyond the
standards and specications of the device.
3. Damage caused by improper handling, e. g. by
using the wrong tools, incorrect installation, incorrect
electrical installation (incorrect polarity) etc.
4. Damage caused by using the device outside the
specied operation conditions.
Technical Data
Id-No. 32.15180.023020
Bird defense ring for precipitation sensors with
Outer diameter: 188...190 mm
Material: Stainless steel (V2A)
Weight: 0.35 kg
For Lambrecht meteo sensor (please order separately):
► rain[e] ► rain[e] Modbus
► rain[e]one ► rain[e]one Modbus
► rain[e]LP ► 15189

Assembly Instructions
Bird Defense Ring for Precipitation Sensors
Id-No. 32.15180.023020
Bird Defense Ring Assembly Instructions
Subject to change without notice.
90°
Bend the ring
Bend the chain stays while the
ring is mounted on the rain[e]
Insert the chain
Insert chain into chain lock
90°
Bend up to
the stop
Mount screws
Mount the ring on
top of the rain[e]
32.15180.023020_Vogelabwehrring_b-d 36.21
LAMBRECHT meteo GmbH Tel [phone]
Friedländer Weg 65-67 Fax [phone]
37085 Göttingen E-Mail [email protected]
Germany Internet www.lambrecht.net